Skip to main content
Erweiterte Suche
Anmelden
nach oben
Tribology Letters
Erschienen in:

01.12.2016 | Original Paper

Solid/Self-Lubrication Mechanisms of an Additively Manufactured Ni–Ti–C Metal Matrix Composite

verfasst von: J. E. Mogonye, A. Srivastava, S. Gopagoni, R. Banerjee, T. W. Scharf

Erschienen in: Tribology Letters | Ausgabe 3/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A Ni–TiC–C metal matrix composite (MMC) has been processed using laser engineered net shaping. This additive manufacturing technique produced a Ni–3Ti–20C (at.%) composition with in situ formation of homogeneously distributed eutectic and primary TiC and graphite precipitates throughout the Ni matrix. The MMC exhibits a low steady-state friction coefficient of ~0.1 in dry sliding conditions. Novel insights into solid/self-lubrication mechanisms, with implications to other metal matrix-graphite particle composites, were revealed with focused ion beam serial sectioning inside worn surfaces. It was determined that lowering of the friction coefficient was a result of the formation of a low interfacial shear strength disordered carbon tribofilm that extruded to the surface through refined Ni grain boundaries. This was supported by finite element analysis that showed the evolution of subsurface stress states and precipitate motion during repeated sliding frictional contact.
Vorheriger Artikel Synthesis and Tribological Performance of Carbon Nanostructures Formed on AISI 316 Stainless Steel Substrates
Nächster Artikel Effect of DC Magnetic Field on Friction and Wear Properties of 45 Steel at Different Velocities

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Prasad, S., Asthana, R.: Aluminum metal-matrix composites for automotive applications: tribological considerations. Tribol. Lett. 17(3), 445–453 (2004)CrossRef
2.
Miracle, D.: Metal matrix composites—from science to technological significance. Compos. Sci. Technol. 65(15), 2526–2540 (2005)CrossRef
3.
Kainer, K.U.: Metal Matrix Composites: Custom-Made Materials for Automotive and Aerospace Engineering. Wiley, Hoboken (2006)CrossRef
4.
Tjong, S.C., Ma, Z.: Microstructural and mechanical characteristics of in situ metal matrix composites. Mater. Sci. Eng. R Rep. 29(3), 49–113 (2000)CrossRef
5.
6.
7.
Shanmughasundaram, P., Subramanian, R.: Wear behaviour of eutectic Al–Si alloy–graphite composites fabricated by combined modified two-stage stir casting and squeeze casting methods. Adv. Mater. Sci. Eng. 2013 (2013). doi:10.​1155/​2013/​216536
8.
Baradeswaran, A., Perumal, A.E.: Wear and mechanical characteristics of Al 7075/graphite composites. Compos. B Eng. 56, 472–476 (2014)CrossRef
9.
Jinfeng, L., Longtao, J., Gaohui, W., Shoufu, T., Guoqin, C.: Effect of graphite particle reinforcement on dry sliding wear of SiC/Gr/Al composites. Rare Met. Mater. Eng. 38(11), 1894–1898 (2009)CrossRef
10.
Ames, W., Alpas, A.: Wear mechanisms in hybrid composites of graphite-20 Pct SiC in A356 aluminum alloy (Al-7 Pct Si-0.3 Pct Mg). Metall. Mater. Trans. A 26(1), 85–98 (1995)CrossRef
11.
Riahi, A., Alpas, A.: The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites. Wear 251(1), 1396–1407 (2001)CrossRef
12.
Guo, M.T., Tsao, C.-Y.: Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites. Mater. Sci. Eng. A 333(1), 134–145 (2002)
13.
Basavarajappa, S., Chandramohan, G., Mahadevan, A., Thangavelu, M., Subramanian, R., Gopalakrishnan, P.: Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite. Wear 262(7–8), 1007–1012 (2007). doi:10.​1016/​j.​wear.​2006.​10.​016 CrossRef
14.
Yang, J., Lin, C., Wang, T., Chu, H.: The tribological characteristics of A356. 2Al alloy/Gr (p) composites. Wear 257(9), 941–952 (2004)CrossRef
15.
Zhan, Y., Zhang, G.: Friction and wear behavior of copper matrix composites reinforced with SiC and graphite particles. Tribol. Lett. 17(1), 91–98 (2004)CrossRef
16.
Mahdavi, S., Akhlaghi, F.: Effect of the graphite content on the tribological behavior of Al/Gr and Al/30SiC/Gr composites processed by in situ powder metallurgy (IPM) method. Tribol. Lett. 44(1), 1–12 (2011). doi:10.​1007/​s11249-011-9818-2 CrossRef
17.
Omrani, E., Moghadam, A.D., Menezes, P.L., Rohatgi, P.K.: Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review. Int. J. Adv. Manuf. Technol. 83, 325–346 (2016)CrossRef
18.
Rohatgi, P., Ray, S., Liu, Y.: Tribological properties of metal matrix-graphite particle composites. Int. Mater. Rev. 37(1), 129–152 (1992)CrossRef
19.
Li, J., Xiong, D.: Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and counterface. Wear 266(1), 360–367 (2009)CrossRef
20.
Rohatgi, P.K., Tabandeh-Khorshid, M., Omrani, E., Lovell, M.R., Menezes, P.L.: Tribology of metal matrix composites. In: Menezes, P.L. et al. (eds.) Tribology for Scientists and Engineers, pp. 233–268. Springer-Verlag, New York (2013)CrossRef
21.
Gopagoni, S., Hwang, J.Y., Singh, A.R.P., Mensah, B.A., Bunce, N., Tiley, J., Scharf, T.W., Banerjee, R.: Microstructural evolution in laser deposited nickel–titanium–carbon in situ metal matrix composites. J. Alloys Compd. 509(4), 1255–1260 (2011). doi:10.​1016/​j.​jallcom.​2010.​09.​208 CrossRef
22.
Schaffer, M., Wagner, J.: Block lift-out sample preparation for 3D experiments in a dual beam focused ion beam microscope. Microchim. Acta 161(3–4), 421–425 (2008)CrossRef
23.
Borkar, T., Sosa, J., Hwang, J.Y., Scharf, T.W., Tiley, J., Fraser, H., Banerjee, R.: Laser-deposited in situ TiC-reinforced nickel matrix composites: 3D microstructure and tribological properties. JOM 66(6), 935–942 (2014)CrossRef
24.
Tian, J., Li, B., Zhao, L.-P.: Microstructure and mechanical behaviors of in situ TiC particulates reinforced Ni matrix composites. Mater. Sci. Eng. A 527(16), 3898–3903 (2010)
25.
Lee, B.-J.: On the stability of Cr carbides. Calphad 16(2), 121–149 (1992)CrossRef
26.
Reich, S., Thomsen, C.: Raman spectroscopy of graphite. Philos. Trans. R. Soc. Lond. A Math. Phys. Eng. Sci. 362(1824), 2271–2288 (2004)CrossRef
27.
Ferrari, A.C., Robertson, J.: Interpretation of Raman spectra of disordered and amorphous carbon. Phys. Rev. B 61(20), 14095 (2000)CrossRef
28.
Dassault Systemes Simulia Corp.: Abaqus user’s manual In: Version 6.10. Providence (2010)
Metadaten
Titel
Solid/Self-Lubrication Mechanisms of an Additively Manufactured Ni–Ti–C Metal Matrix Composite
verfasst von
J. E. Mogonye
A. Srivastava
S. Gopagoni
R. Banerjee
T. W. Scharf
Publikationsdatum
01.12.2016
Verlag
Springer US
Erschienen in
Tribology Letters / Ausgabe 3/2016
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-016-0770-z

Weitere Artikel der Ausgabe 3/2016

Investigation on Material Response to Ultrahigh Velocity Impact on Ceramics by Micro Particle

  • Original Paper

Effect of 2D Boron Nitride Nanoplate Additive on Tribological Properties of Natural Oils

  • Original Paper

Synthesis and Tribological Performance of Carbon Nanostructures Formed on AISI 316 Stainless Steel Substrates

  • Original Paper

A Stress-Criterion-Based Model for the Prediction of the Size of Wear Particles in Boundary Lubricated Contacts

  • Open Access
  • Original Paper

Study of Friction-Reduction Properties of Fatty Acids and Adsorption Structures of their Langmuir–Blodgett Monolayers using Sum-Frequency Generation Spectroscopy and Atomic Force Microscopy

  • Original Paper

Airborne Wear Particles Generated from Conductor Rail and Collector Shoe Contact: Influence of Sliding Velocity and Particle Size

  • Open Access
  • Original Paper

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise