Skip to main content
Erschienen in: Strength of Materials 5/2021

13.01.2022

Solution to the Three-Dimensional Problem on the Thermal Stress State of Hollow Shells with Rigid and Sliding Contacts of Layers

verfasst von: O. V. Marchuk, N. Yu. Vasylevs’kyi, D. I. Lobashov

Erschienen in: Strength of Materials | Ausgabe 5/2021

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The authors have developed two approaches to investigating the thermal stress state of layered composite hollow shells. The face surfaces of the shell layers have zero torsional curvature, the variation in principal curvatures is neglected. The coefficients of the first quadratic form are assumed to be unity. It is assumed that the radii of curvature are much larger than the thickness of the structure, and its outer surfaces have the same curvature. The restrictions allow one to identify the curvilinear system of orthogonal coordinates with the planar system of orthogonal coordinates. Based on Hooke’s law, the missing longitudinal components of the stress tensor are obtained. Using the Reissner variational principle, a system of integro-differential equations of equilibrium is written down (for the case of joint support in the temperature load distribution under the trigonometric law). Moreover, it is transformed into a system of ordinary differential equations for the distribution of required functions over the thickness of the hollow shell. This system is solved analytically, with the functions in the form of an exponent, searching for the roots of homogeneous algebraic characteristic equations and their eigenvectors. The integration constants are on the conditions on the outer surfaces of the layers. In compliance with the second approach, the polynomial approximation of the functions to be searched by the thickness of the hollow shell is applied. The peculiarity of this approach is the attribution of the unknown functions to the outer surfaces of the layers, which allows one to partition them into sublayers with a corresponding reduction of the approximation error. The convergence of the calculation results from the two proposed approaches can confirm their reliability.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat B. G. Galerkin, Collected Works [in Russian], Vol. 1, Academy of Sciences of USSR, Moscow (1952). B. G. Galerkin, Collected Works [in Russian], Vol. 1, Academy of Sciences of USSR, Moscow (1952).
2.
Zurück zum Zitat B. F. Vlasov, “On one case of bending a rectangular thick plate,” Vestn. MGU, No. 2, 25–34 (1957). B. F. Vlasov, “On one case of bending a rectangular thick plate,” Vestn. MGU, No. 2, 25–34 (1957).
3.
Zurück zum Zitat N. J. Pagano, “Exact solutions for rectangular bidirectional composites sandwich plates,” J. Compos. Mater., 4, No. 1, 20–34 (1979).CrossRef N. J. Pagano, “Exact solutions for rectangular bidirectional composites sandwich plates,” J. Compos. Mater., 4, No. 1, 20–34 (1979).CrossRef
4.
Zurück zum Zitat S. P. Timoshenko and J. N. Goodier, Theory of Elasticity, McCraw-Hill, New York (1970). S. P. Timoshenko and J. N. Goodier, Theory of Elasticity, McCraw-Hill, New York (1970).
5.
Zurück zum Zitat A. P. Prusakov, V. D. Bondarenko, and V. A. Prusakov, Bending of Free-Floating Three-Layered Plates of Asymmetric Structure under Transverse Sinusoidal Load (Exact Solution) [in Russian], Dep. in UkrNIINTI, N2366-UK.86, November 26, 1986. A. P. Prusakov, V. D. Bondarenko, and V. A. Prusakov, Bending of Free-Floating Three-Layered Plates of Asymmetric Structure under Transverse Sinusoidal Load (Exact Solution) [in Russian], Dep. in UkrNIINTI, N2366-UK.86, November 26, 1986.
6.
Zurück zum Zitat A. E. Bogdanovich and P. L. Sierakowski, “Composite materials and structures: Science, technology and applications – A compendium of books, review, papers, and other sources of information,” Appl. Mech. Rev., 52, No. 12, 351–366 (1999).CrossRef A. E. Bogdanovich and P. L. Sierakowski, “Composite materials and structures: Science, technology and applications – A compendium of books, review, papers, and other sources of information,” Appl. Mech. Rev., 52, No. 12, 351–366 (1999).CrossRef
7.
Zurück zum Zitat A. K. Noor and W. S. Burton, “Three-dimensional solutions for antisymetrically laminated anisotropic plates,” J. Appl. Mech., 57, 182–187 (1990).CrossRef A. K. Noor and W. S. Burton, “Three-dimensional solutions for antisymetrically laminated anisotropic plates,” J. Appl. Mech., 57, 182–187 (1990).CrossRef
8.
Zurück zum Zitat M. Savooia and J. N. Reddy, “A variational approach to three-dimensional elasticity solutions of laminated composite plates,” J. Appl. Mech., 59, 166–175 (1992).CrossRef M. Savooia and J. N. Reddy, “A variational approach to three-dimensional elasticity solutions of laminated composite plates,” J. Appl. Mech., 59, 166–175 (1992).CrossRef
10.
Zurück zum Zitat A. V. Marchuk, “Three-dimensional analytical solution for laminar plates with allowance for layer slip,” Int. Appl. Mech., 33, No. 9, 685–689 (1997).CrossRef A. V. Marchuk, “Three-dimensional analytical solution for laminar plates with allowance for layer slip,” Int. Appl. Mech., 33, No. 9, 685–689 (1997).CrossRef
11.
Zurück zum Zitat A. V. Marchuk and V. G. Piskunov, “Statics, vibrations and stability of composite panels with gently curved orthotropic layers. 1. Statics and vibrations,” Mech. Compos. Mater., 35, No. 4, 285–292 (1999).CrossRef A. V. Marchuk and V. G. Piskunov, “Statics, vibrations and stability of composite panels with gently curved orthotropic layers. 1. Statics and vibrations,” Mech. Compos. Mater., 35, No. 4, 285–292 (1999).CrossRef
12.
Zurück zum Zitat Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova, Problems of the Theory of Elasticity of Non-Homogeneous Bodies [in Russian], Naukova Dumka, Kiev (1991). 750 Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova, Problems of the Theory of Elasticity of Non-Homogeneous Bodies [in Russian], Naukova Dumka, Kiev (1991). 750
Metadaten
Titel
Solution to the Three-Dimensional Problem on the Thermal Stress State of Hollow Shells with Rigid and Sliding Contacts of Layers
verfasst von
O. V. Marchuk
N. Yu. Vasylevs’kyi
D. I. Lobashov
Publikationsdatum
13.01.2022
Verlag
Springer US
Erschienen in
Strength of Materials / Ausgabe 5/2021
Print ISSN: 0039-2316
Elektronische ISSN: 1573-9325
DOI
https://doi.org/10.1007/s11223-021-00339-2

Weitere Artikel der Ausgabe 5/2021

Strength of Materials 5/2021 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.