Ausgabe 6/2019
Inhalt (81 Artikel)
Enzymatic Desulfurization of Crude Oil and Its Fractions: A Mini Review on the Recent Progresses and Challenges
Saheed A. Lateef, Oluwole O. Ajumobi, Sagheer A. Onaizi
Evaluation of Heat Transfer Mechanisms in Heat Pipe Charged with Nanofluid
Vahit Corumlu, Ahmet Ozsoy, Murat Ozturk
Numerical Modelling for the Optimum Design of Horizontal Well Completions with PSCs in Water Drive Reservoirs
Mingjun Yang, Haitao Li, Yongqing Wang, Rui Jiang
Numerical Study of Long-Term Radioactivity Impact on Foodstuff for Accidental Release Using Atmospheric Dispersion Model
Ahmed Dahia, Djemai Merrouche, Djillali R. Merouani, Tahar Rezoug, Hakim Aguedal
A New Mg–Al–Cu–Fe-LDH Composite to Enhance the Adsorption of Acid Red 66 Dye: Characterization, Kinetics and Isotherm Analysis
Intissar Harizi, Derradji Chebli, Abdallah Bouguettoucha, Sohrab Rohani, Abdeltif Amrane
Experimental Investigations on Performance, Combustion, and Emission Characteristics of Niger (Guizotia abyssinica) Seed Oil Methyl Ester Blends with Diesel at Different Compression Ratios
S. Jaikumar, S. K. Bhatti, V. Srinivas
Combination of Two Experimental Designs to Optimize the Dimethylphthalate Elimination on Activated Carbon Elaborated from Arundo donax
N. Doufene, T. Berrama, D. Tahtat, S. Benredouane, C. Nekaa
Augmentation of Heat Transfer and Investigation of Fluid Flow Characteristics of an Impinging Air Jet on to a Flat Plate
K. Jeyajothi, P. Kalaichelvi
Investigation of Catalytic Sustainability of Silica-Based Mesoporous Acidic Catalysts and Ion-Exchange Resins in Methyl Acetate Synthesis and Characterizations of Synthesized Catalysts
Veli Şimşek
Combined Adsorption/Photocatalysis Process for the Decolorization of Acid Orange 61
Elhadj Mekatel, Samira Amorkrane, Mohamed Trari, Djamel Nibou, Nadjib Dahdouh, Samir Ladjali
Erosion-Resistant Enhancement of Anti-oxidation Coatings in Hypersonic Flows of Air Plasma
Alexey N. Astapov, Boris E. Zhestkov, Ivan P. Lifanov, Lev N. Rabinskiy, Valentina S. Terentieva
Separation of Manganese from Iron in the Reductive Leaching Iron-Rich Pyrolusite Ore: Leaching Mechanism and Kinetics
Lin Deng, Bing Qu, Shi-jun Su, Sang-lan Ding, Wei-yi Sun
The Removal of Cr(VI) from Aqueous Solution by Activated Carbon Prepared from Apricot, Peach Stone and Almond Shell Mixture in a Fixed-Bed Column
Şeyma Yüksel, Ramazan Orhan
Chemical-Looping Combustion of Methane Using as an Oxygen Carrier: Effects of MgO Addition
Sasithorn Sunphorka, Oranee Poonsritanakul, Prapan Kuchonthara
Isobaric Vapour–Liquid Equilibrium Data Measurement for a Binary System of Green Solvent 2-Methyltetrahydrofuran and Acetic acid at 101.3 kPa
Vyomesh M. Parsana, Sachin P. Parikh
Synthesis and Application of Cu-X zeolite for Removal of Antibiotic from Aqueous Solution: Process Optimization Using Response Surface Methodology
Asma Rahimi, Behrouz Bayati, Mehrdad Khamforoush
Influence of Bacillus subtilis and Pseudomonas aeruginosa BSW and Clinoptilolite Addition on the Biowaste Composting Process
Dajana K. Grgić, Marija V. Domanovac, Tomislav Domanovac, Monika Šabić, Matija Cvetnić, Vesna O. Bulatović
Controlled Syntheses of Multi-walled Carbon Nanotubes from Bimetallic Fe–Co Catalyst Supported on Kaolin by Chemical Vapour Deposition Method
A. Oyewemi, A. S. Abdulkareem, J. O. Tijani, M. T. Bankole, O. K. Abubakre, A. S. Afolabi, W. D. Roos
Enhancing the Rheological Properties of Water-Based Drilling Fluid Using Micronized Starch
Salaheldin Elkatatny
Preparation and Characterization of Shiitake Mushroom-Based Activated Carbon with High Adsorption Capacity
Zhiwei Sun, C. Srinivasakannan, Jinsheng Liang, Xinhui Duan
Modification of Zeolite by Magnetic Nanoparticles for Organic Dye Removal
Zaianb Majid, Adnan A. AbdulRazak, Wallaa Abdul Hadi Noori
Comparison of the Steady-State Performances of Regulatory Control Structures for Fluid Catalytic Cracking Unit
Anish Thomas, M. V. Pavan Kumar
Cinnamaldehyde as a Green Inhibitor in Mitigating AISI 1015 Carbon Steel Corrosion in HCl
S. M. Zakir Hossain, A. Al-Shater, S. A. Kareem, A. Salman, R. A. Ali, H. Ezuber, M. M. Hossain, S. A. Razzak
Chemical Looping Combustion of Methane or Coal by Mixed Oxygen Carrier
Sasithorn Sunphorka, Panuwattana Kanokwannakorn, Prapan Kuchonthara
A New Approach in Predicting Gas Adsorption Isotherms and Isosteric Heats Based on Two-Dimensional Equations of State
Ali Bakhtyari, Masoud Mofarahi
Fe(II)-Based GDE Electrodes for the Demineralization of Methylene Blue Dye
S. Z. J. Zaidi, E. Hurter, F. C. Walsh, C. Ponce de León
RSM and Crow Search Algorithm-Based Optimization of Ultrasonicated Transesterification Process Parameters on Synthesis of Polyol Ester-Based Biolubricant
S. Arumugam, P. Chengareddy, A. Tamilarasan, V. Santhanam
Quantum Chemical Study on the Reaction Mechanism of Fast SCR Catalyzed by ZSM-5 Doped with Mn/Co–Al/Ce
Zhengcheng Wen, Shengji Li, Heping Li, Yuan Li, Guangqin Wang
Electrophoretic Deposition of Graphene Oxide Nanosheets on Copper Pipe for Corrosion Protection
Essam Hares, A. H. El-Shazly, M. F. El-Kady, A. S. Hammad
Antifouling Improvement of Polyethersulfone Membrane Incorporated with Negatively Charged Zinc–Iron Oxide for AT-POME Colour Removal
M. N. Subramaniam, P. S. Goh, Y. H. Tan, S. J. Chiong, W. J. Lau, B. C. Ng, A. F. Ismail, J. Y. Chuah, S. O. Lai
Copper-Exchanged Philippine Natural Zeolite as Potential Alternative to Noble Metal Catalysts in Three-Way Catalytic Converters
Lailyn M. Guerrero, Jenica F. Mendoza, Kim Thomas V. Ong III, Eleanor M. Olegario-Sanchez, Emmanuel L. Ferrer
Performance Modeling and Experimental Investigation of Parasitic Losses in a Flat-Panel Solar Thermoelectric Generator
Naveed ur Rehman, Mubashir Ali Siddiqui, Muhammad Uzair
Enhancement of Mechanical Properties of Cork Through Thermal High-Temperature Treatment (THT) and Boiling
T. Kermezli, M. Douani, M. Announ
Anisotropic Mesh Refinement Considering a Recovery-Based Error Estimator and Metric Tensors
Jucélio Tomás Pereira, Jéderson da Silva
Numerical Investigation of Transient Natural Convection Heat Transfer of non-Newtonian Nanofluids Between Eccentric Annulus
Behzad A. Harab, Tamer Calisir, Senol Baskaya
Pressure-Driven Flow of Cross Fluid Along a Stationary Plate Subject to Binary Chemical Reaction and Arrhenius Activation Energy
M. Mustafa, Aiman Sultan, Mahmood Rahi
Applying Particle Swarm Optimization to Study the Effect of Dominant Poles Places on Performance of a Free Piston Stirling Engine
Sh. Zare, A. R. Tavakolpour-Saleh
Control of Cylinder Consistency for a Two-Stroke Spark-Ignition Engine
Rui Liu, Jing Sheng, Minxiang Wei, Yongsheng Liang, Yifan Chen
LCC Optimization of Different Insulation Materials and Energy Sources Used in HVAC Duct Applications
Dileep Kumar, Intizar Ali, Muhammad Hakeem, Awais Junejo, Khanji Harijan
Nanomechanical, Mechanical Responses and Characterization of Piezoelectric Nanoparticle-Modified Electrospun PVDF Nanofibrous Films
M. Satthiyaraju, T. Ramesh
A Novel Heaving Ocean Wave Energy Harvester with a Frequency Tuning Capability
N. V. Viet, A. Carpinteri, Q. Wang
Effect of Silica/Graphene Nanohybrid Particles on the Mechanical Properties of Epoxy Coatings
Umit Esra Ozcan, Fazliye Karabork, Sakir Yazman, Ahmet Akdemir
Heat Transfer Enhancement in Transformers by Optimizing Fin Designs and Using Nanofluids
Muhammad Farhan, Muhammad Saad Hameed, Hafiz Muhammad Suleman, Muhammad Anwar
Piezoelectric Energy Harvesting from a Bridge Subjected to Time-Dependent Moving Loads Using Finite Elements
Kouider Bendine, Mohamed Hamdaoui, Benallel Farouk Boukhoulda
Numerical Investigation on Vibration and Stability of Cutting Fluid Delivery Viscoelastic Conduits
H. S. Sunil Kumar, R. B. Anand, D. L. Prabhakara
Prediction of Temperature Distribution of the Spindle System by Proposed Finite Volume and Element Method
V. Prabhu Raja, R. Sathiya Moorthy
CFD-Based Comparative Performance Analysis of Different Nanofluids Used in Automobile Radiators
Tasueef Aized Khan, Hassaan Ahmad
Experimental Investigation on Cutting Tool Performance of Newly Synthesized P/M Alloy Steel Under Turning Operation
T. Panneerselvam, T. K. Kandavel, P. Kishore
Performance Analysis and Simulation of a Diesel-Miller Cycle (DiMC) Engine
Guven Gonca, Mehmet Fatih Hocaoglu
A Theoretical Heat Transfer Model for Unidirectional Solidification of Pure Metals on a Coated Sinusoidal Mold with Constant Boundary Temperature
Mehmet Hakan Demir, Faruk Yigit
Experimental Investigation and Modeling of Surface Finish in Argon-Assisted Electrical Discharge Machining Using Dimensional Analysis
Nishant K. Singh, Yashvir Singh
A Temperature-Dependent, Nonlinear Kinematic/Isotropic Hardening Material Constitutive Model of the Surface Layer of 37Cr4 Steel Subjected to Slide Burnishing
J. T. Maximov, G. V. Duncheva, A. P. Anchev
Performance of a Heavy-Duty Turbocharged Diesel Engine Under the Effect of Air Injection at Intake Manifold During Transient Operations
S. M. Saad, R. Mishra
Electrochemical Corrosion Performance of Aromatic Functionalized Imidazole Inhibitor Under Hydrodynamic Conditions on API X65 Carbon Steel in 1 M HCl Solution
A. Ismail, H. M. Irshad, A. Zeino, I. H. Toor
Numerical Simulation of Liquid Fuel Injection in Combustion Chamber
Syed Azeem Inam, Mukkarum Hussain, Mirza Mehmood Baig
Characterization Studies of Slurry-Sprayed Mullite–Nickel Coatings on ASTM 1018 Steel
Rajeev Verma, Jagjit Singh Randhawa, Suman Kant, Narendra Mohan Suri
Effect of Ultra-low Vegetable Oil Droplets on Microporous Media Burner Under Surface and Submerged Flames
Ayub Ahmed Janvekar, Aizat Abas, Zainal Arifin Ahmad, T. Juntakan, M. Z. Abdullah
Estimation, Optimization, and Performance of Layered Thermal Insulation Structure in a Wide Aperture Gas Discharge Copper Vapour Laser Assembly
Rajeev Chaube
Utilization of Elastic Deformation on Cu–Ag Nanoscale Particles Mixed in Hydrogen Oxide with Unique Features of Heat Generation/Absorption: Closed Form Outcomes
Bilal Ahmad, Z. Iqbal, E. N. Maraj, S. Ijaz
CFD Study of Variable Property Effects on Laminar Micro-convective Heat Transfer
Amjad Ali Pasha, M. Abdul Raheem, N. Islam, K. A. Juhany, A. Mushtaq, S. S. Halkarni
Geometrical and Mechanical Aspects of Periodic Thermal Boundaries on Electrically Conducting Viscoplastic Fluid in a Vertical Channel with Rotating Characteristics
Iffat Zehra, E. N. Maraj, Z. Iqbal
Influence of Variable Transport Properties on Nonlinear Radioactive Jeffrey Fluid Flow Over a Disk: Utilization of Generalized Differential Quadrature Method
M. Qasim, M. I. Afridi, A. Wakif, S. Saleem
Performance Assessment and Solution Procedure for Series Flow Double-Effect Absorption Refrigeration Systems Under Critical Operating Constraints
İbrahim Halil Yılmaz, Kenan Saka, Ömer Kaynaklı, Önder Kaşka
Thermal Behavior of Spark Plasma Sintered Alumina-Based Nanocomposites
I. Momohjimoh, S. Nouari, M. A. Hussein, T. Laoui, N. Al-Aqeeli
Mechanical Behaviors of Bottom Hole Assembly with Bent-Housing Positive Displacement Motor Under Rotary Drilling
Haosheng Liu, Tianshou Ma, Ping Chen, Xudong Wang, Xingming Wang
Synthetic Evaluation of Natural Gas Pipeline Operation Schemes Based on the Multi-level Grey Cluster Decision Method
Xia Wu, Wenlong Jia, Zhuoran Li
Applicability Evaluation and Hysteresis Heat Effect of Rubber Constitutive Model of PDM Stator Bushing at High Temperature in Deep Well
Shi Changshuai, Chen Yike, Zhu Xiaohua
Optimal Design and Experimental Modification of Multi-row Valve Ports Generating Drilling Fluid Continuous Wave
Zhengxu Wang, Deli Gao, Jun Fang, Xin Li
New Model for Pore Pressure Prediction While Drilling Using Artificial Neural Networks
Abdulmalek Ahmed, Salaheldin Elkatatny, Abdulwahab Ali, Mohamed Mahmoud, Abdulazeez Abdulraheem
Development of Emulsified System to Remove Organic Scales from Water Injection Wells: Laboratory Analysis and Field Treatment
Nasser M. Al-Hajri, Mohamed Mahmoud, Ali A. Taq, Mohammed D. Al-Ajmi
Multiphase Simulation Model for Validating the Estimate of Light Non-Aqueous Phase Liquids (LNAPL) Transmissivity Using Bail-Down Test
Waqas Ahmed, Cédric Palmier, Olivier Atteia, Holger Class
Evaluation of Epoxy Resin Thermal Degradation and its Effect on Preventing Sustained Casing Pressure in Oil and Gas Wells
Abdullah Al-Yami, Vikrant Wagle, Walmy Cuello Jimenez, Paul Jones
Comparing Mechanical Behavior of API H-Class Cement Reinforced with Carbon, Mineral or Polypropylene Fiber Additions
Juan Jesús Martín-Del-Rio, Gonzalo Márquez-Martínez, Emilio Romero Macías, Olga Rey Balseiro, Vicente Flores-Alés, Alexis Pérez-Fargallo, Carlos Rubio Bellido
A Self-Adaptive Artificial Neural Network Technique to Predict Total Organic Carbon (TOC) Based on Well Logs
Salaheldin Elkatatny
Performance and Economic Analysis of SAGD and VAPEX Recovery Processes
Tamer Moussa
Estimating the Static Bottom-Hole Pressure of Gas Wells by Top Node Calculation Using Apparent Molecular Weight Profiling
Nasser M. Al-Hajri, Sidqi A. Abu-Khamsin, Mohammed D. Al-Ajmi
Effect of Silica Nanofluid on Nanoscopic Pore Structure of Low-Permeability Petroleum Reservoir by Nitrogen Adsorption Technique: A Case Study
Caspar Daniel Adenutsi, Zhiping Li, Zhichao Xu, Anthony Edem Hama, Lili Sun, Fengpeng Lai
Optimization Strategy to Reduce Asphaltene Deposition-Associated Damage During CO Huff-n-Puff Injection in Shale
Ziqi Shen, James J. Sheng
Reserve Estimation Using Decline Curve Analysis for Boundary-Dominated Flow Dry Gas Wells
Emeka Emmanuel Okoro, Austin Okoh, Evelyn Bose Ekeinde, Adewale Dosunmu
Effect of Gas Adsorption on the Estimation of Gas in Place (GIP) in Conventional and Unconventional Reservoirs
Mohamed Mahmoud
Correction to: Improving Brain Tumor Diagnosis Using MRI Segmentation Based on Collaboration of Beta Mixture Model and Learning Automata
Akram Edalati-rad, Mohammad Mosleh