Skip to main content
main-content

Zeitschrift

European Journal of Wood and Wood Products

European Journal of Wood and Wood Products 5/2018

Ausgabe 5/2018

Inhaltsverzeichnis ( 19 Artikel )

15.06.2018 | Original | Ausgabe 5/2018 Open Access

An optical method for rapid examination of check development in decorative plywood panels

Michael David Burnard, Lech Muszyński, Scott Leavengood, Lisa Ganio

13.06.2018 | Original | Ausgabe 5/2018

Quantitative image analysis of acoustic tomography in woods

Jorge Renato Andrade Strobel, Marco Antonio Garcia de Carvalho, Raquel Gonçalves, Cinthya Bertoldo Pedroso, Mariana Nagle dos Reis, Paulo S. Martins

20.07.2018 | Original | Ausgabe 5/2018 Open Access

Cold tack of urea formaldehyde resins as an important factor in plywood production

Elfriede M. Hogger, Hendrikus W. G. van Herwijnen, Johann Moser, Wolfgang Kantner, Johannes Konnerth

09.06.2018 | Original | Ausgabe 5/2018

Curing behavior and bonding strength of two-component fast-setting adhesives prepared with phenol-liquefied Cryptomeria japonica wood

Yen-Chun Chen, Wen-Jau Lee

07.06.2018 | Original | Ausgabe 5/2018

The potential of phenol–formaldehyde as plasticizing agent for moulding applications of wood veneer: two-dimensional and three-dimensional moulding

Tom Franke, Nadine Herold, Beate Buchelt, Alexander Pfriem

18.06.2018 | Original | Ausgabe 5/2018

A simple fabrication of superhydrophobic wood surface by natural rosin based compound via impregnation at room temperature

Mingsheng Yang, Xiaoyu Chen, Haixia Lin, Chunrui Han, Shifeng Zhang

18.06.2018 | Original | Ausgabe 5/2018

Investigation of modified water glass as adhesive for wood and particleboard: mechanical, thermal and flame retardant properties

Soo Jung Lee, Volker Thole

26.06.2018 | Original | Ausgabe 5/2018 Open Access

Experimental study on glued laminated timber beams with well-known knot morphology

Georg Kandler, Markus Lukacevic, Josef Füssl

26.07.2018 | Original | Ausgabe 5/2018

Study of rosin softening point through thermal treatment for a better understanding of maritime pine exudation

Thomas Cabaret, Benjamin Boulicaud, Emmanuel Chatet, Bertrand Charrier

27.07.2018 | Original | Ausgabe 5/2018

Kinematic characterization of the pressure-dependent PCM impregnation process for radiata pine wood samples

Diego A. Vasco, Carlos Salinas-Lira, Ignacio Barra-Reyes, Diego M. Elustondo

27.07.2018 | Original | Ausgabe 5/2018 Open Access

Utilisation of chemically modified lampante oil for wood protection

Matthew Schwarzkopf, Michael Burnard, Viacheslav Tverezovskiy, Andreas Treu, Miha Humar, Andreja Kutnar

19.06.2018 | Original | Ausgabe 5/2018

Inhibited wood degradation of cement-coated beech Laminated Veneer Lumber (LVL) for temporary in-ground applications

Sebastian Hirschmüller, Roman Marte, Johann Pravida, Michael Flach

08.06.2018 | Original | Ausgabe 5/2018

Reduction of the surface colour variability of thermally modified Eucalyptus globulus wood by colour pre-grading and homogeneity thermal treatment

Carolina Griebeler, Gianluca Tondi, Thomas Schnabel, Carmen Iglesias, Sergio Ruiz

29.06.2018 | Original | Ausgabe 5/2018

Evaluation of low density hybrid panels using expandable granules: effect of granules diameter and content

Ali Shalbafan, Saber Jafarnezhad, Jan Luedtke

15.06.2018 | Original | Ausgabe 5/2018

Effects of recycled fiber content on the properties of medium density fiberboard

Muhammad Adly Rahandi Lubis, Min-Kug Hong, Byung-Dae Park, Sang-Min Lee

27.07.2018 | Original | Ausgabe 5/2018

Lignin and extractives degradation in poplar wood in the presence of hydrogen peroxide and molybdenum polyoxometalated compound

Maurizio D’Auria, Marisabel Mecca, Luigi Todaro

05.06.2018 | Original | Ausgabe 5/2018

Determining the predictive accuracy of whole tree modulus of elasticity (MOE) of 14-year-old loblolly pine using density and dynamic MOEs estimated by three different acoustic tools

Charles Essien, Brian K. Via, Qingzheng Cheng, Thomas Gallagher, Timothy McDonald, Lori Eckhardt

10.07.2018 | Original | Ausgabe 5/2018

UV–VIS spectral and GC–MS characterization of Handroanthus serratifolius (Vahl.) Grose (a.k.a. Tabebuia serratifolia (Vahl.) Nichols/Lapacho) heartwood main extractives: a comparison of protocols aimed at a practical evaluation of Lapachol and Dehydro-α-Lapachone content

Enrico Segoloni, Francesco Di Maria

25.06.2018 | Original | Ausgabe 5/2018

Curing behavior and adhesion properties of epoxy resin blended with phenol-liquefied Cryptomeria japonica

Wen-Jau Lee, Chen-Ling Kang, Yi-Chun Chen, Zheng-Ying Wu

Aktuelle Ausgaben