Ausgabe 10/2019
Inhalt (59 Artikel)
Impact of Cryogenic Treatment on Mechanical Behavior and Microstructure of Ti-6Al-4V ELI Biomaterial
Anil Kumar Singla, Jagtar Singh, Vishal S. Sharma
Effect of Prestrain on the Fatigue Life of Superelastic Nitinol
Karthikeyan Senthilnathan, Ali Shamimi, Craig Bonsignore, Harshad Paranjape, Tom Duerig
Performance of Composite Insulators Used for Electric Transmission under Extreme Climatic Conditions
Sounak Nandi, B. Subba Reddy, Dinesh Sharma
Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications
Mamoun Fellah, Naouel Hezil, Mohammed Abdul Samad, Ridha Djellabi, Alex Montagne, Alberto Mejias, Stephania Kossman, Alain Iost, Agung Purnama, Aleksei Obrosov, Sabine Weiss
Alternative Pathogen Control Chemistry of Glass Fiber-Reinforced Polyester Panels for Cooling Towers
Seval Bal, Nazmiye Ozlem Sanli, Yusuf Menceloglu
Investigation of Mode I Notch Toughness of Zr41.2Ti13.8Cu10Ni12.5Be22.5 Metallic Glass under Dynamic Loading Conditions
Zhiyong Wang, Zhipeng Zhou, Zhiming Jiao, Jing Gu, Junwei Qiao, Zhihua Wang
Investigation into the Wear and Dent Resistance of Ni/Ti Nanolaminates and Superelastic NiTi Coating
Nicole Cameron, Zoheir Farhat
On the Use of Voltammetry to Estimate the Effectiveness of Cathodic Protection of Buried Steel Structures
Dan Nguyen Dang, Marc Jeannin, René Sabot, Elisabeth Fleury, Philippe Refait
Influence of Y-Rich Compounds on High-Cycle Fatigue Performance of Y-Doped M951 Superalloy
Pengjie Zhou, Dehang Song, Ning Liu, Nobufumi Ueshima, Katsunari Oikawa
Study on Tribological and Friction Noise Performance of Ti6Al4V Self-lubricating Composites
Zhenyu Yang, Xiaoliang Shi, Chaohua Wu, Hongyan Zhou, Ming Guo, Shun Liu, Jiangjing Lin, Chunliang Fu
The Effect of Annealing Time on Microstructure and AC Corrosion Behavior of X80 Steel in Simulated Solution of Alkaline Soil
M. Zhu, J. Ma, Y. F. Yuan, S. Y. Guo, S. M. Yin, C. W. Du
Electrochemical Corrosion Behavior of 5083 Aluminum Alloy Subjected to Laser Shock Peening
Yu Yang, Wangfan Zhou, Zhaopeng Tong, Lan Chen, Xueqing Yang, Enoch Asuako Larson, Xudong Ren
Characterization of Laser-Welded Ti Alloy and Stainless Steel Joint Using Cu Interlayer
Yan Zhang, DaQian Sun, XiaoYan Gu, HongMei Li
Corrosion Behavior of AZ31 Magnesium Alloy Produced by Continuous Variable Cross Section Direct Extrusion
Wen Kang, Feng Li, Wen Yong Shi, Xue Wen Li, Wen Bin Fang
The Effect of Weld Metal Composition on Microstructural and Mechanical Properties of Dissimilar Welds Between Monel 400 and Inconel 600
Naser Aminipour, Reza Derakhshandeh-Haghighi
Investigation of the Hot Stamping Process for TRIP Steel with High Strength and High Ductility
Xianhong Han, Huizhen Zhang, Yuanyuan Li, Johnston Jackie Tang, Chenglong Wang, Jun Chen
Functionally Graded W-Cu Materials Prepared from Cu-Coated W Powders by Microwave Sintering
Wenchao Chen, Pengqi Chen, Jianfeng Li, Jianhua Zhang, Laima Luo, Jigui Cheng
Microstructure and Mechanical Properties of B4C-Blended M3:2 High-Speed Steel Powders Consolidated by Sintering and Heat Treatment
Fengli Zhang, Peng Luo, Qi Ouyang, Qinqiu He, Ming Hu, Songlin Li
Workability of High-Strength Automobile Steel at High Temperatures Using Hot Processing Maps and Electron Backscatter Diffraction
Zhi-Qiang Yang, Li-Gang Liu, Ge Wang, Tong-Guang Zhai, Chun-Mei Zhao, Hui Yu, Qiang Li
Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy
N. S. Pushilina, V. A. Klimenov, R. O. Cherepanov, E. B. Kashkarov, V. V. Fedorov, M. S. Syrtanov, A. M. Lider, R. S. Laptev
Refill Friction Stir Spot Welding Dissimilar Al/Mg Alloys
Peng Chai, Wei Hu, Shude Ji, XinXin Ai, Zan Lv, Qi Song
The Effect of Annealing on the Properties of AW5754 Aluminum Alloy-AZ31B Magnesium Alloy Explosively Welded Bimetals
Miroslav Sahul, Martin Sahul, Ján Lokaj, Ľubomír Čaplovič, Petr Nesvadba, Barbara Odokienová
Characterization of Hot Workability of 5052 Aluminum Alloy Based on Activation Energy-Processing Map
Peng Zhou, Lei Deng, Mao Zhang, Pan Gong, Xin-yun Wang
Ti Alloy Three-Way Pipe Fabricated by the Combination of 3D Printing and Cold Isostatic Pressing
Yanru Shao, Fang Yang, Peng Liu, Zhaohong Feng, Xin Lu, Zhimeng Guo, Huan Xu, Alex A. Volinsky
Effect of Boron Micro-alloying on Microstructure and Corrosion Behavior of Dual-Phase Steel
Satendra Kumar, Rahul Desai
Effect of Solution Heating Rate on Quasi-static and Dynamic Mechanical Properties of Al-Mg-Si-Cu Alloy
Xiaofeng Wang, Tongya Shi, Cunqiang Ma, Hebin Wang, Chao Xie, Jianbin Chen, Yonggang Wang
Development of Pore-Free Ti-Si-C MAX/Al-Si Composite Materials Manufactured by Squeeze Casting Infiltration
Anna Dmitruk, Krzysztof Naplocha, Andrzej Żak, Agata Strojny-Nędza, Hajo Dieringa, Karl Ulrich Kainer
Magnetron-Sputtered Ni-Cr and Ti-Si Layers to Protect Ti-46Al-8Nb (at.%) Substrates Against Gas Absorption
Marzena Mitoraj-Królikowska, Elzbieta Godlewska
Comparative Corrosion Behavior of Five Different Microstructures of Rebar Steels in Simulated Concrete Pore Solution with and Without Chloride Addition
Prvan Kumar Katiyar, Prasanna Kumar Behera, S. Misra, K. Mondal
Hot Deformation and Processing Maps of B4C/6061Al Nanocomposites Fabricated by Spark Plasma Sintering
Ruifeng Liu, Wenxian Wang, Hongsheng Chen, Yuyang Zhang, Shipeng Wan
Exploiting Acoustic Anisotropy to Detect Recrystallization in a Ni Single Crystal Using Ultrasonic Nondestructive Inspection
Mark F. A. Warchol, Trevor J. Watt, Doyle T. Motes, Lyudmila Warchol, Eric M. Taleff
Comparative Evaluation of Creep-Rupture Behavior of P9 Steel Plate and Thick Section Tubeplate Forging
B. K. Choudhary, Isaac Samuel E., Christopher J., S. D. Yadav
Effect of Tungsten Inert Gas Arc Remelting on Microstructure and Wear Properties of Plasma-Sprayed NiCr-Cr3C2 Coating
Jing-min Yuan, Tian-shun Dong, Bin-guo Fu, Guo-lu Li, Li Liu, Ran Wang
Characterization of Hydrophobic Silane Film Deposited on AISI 304 Stainless Steel for Corrosion Protection
E. T. Akinlabi, A. D. Baruwa, O. P. Oladijo, N. Maledi, J. Chinn
Effect of Molybdenum Content on Structure and Properties of a Co-Cr Biomedical Alloy
Amit Aherwar, Amar Patnaik, Marjan Bahraminasab
Synergetic Strengthening of Grain Refinement and Texture in Gradient Zircaloy-4 by Surface Mechanical Rolling Treatment
Chao Xin, Qiaoyan Sun, Lin Xiao, Jun Sun
Effect of Tool Offset and Rotational Speed in Dissimilar Friction Stir Welding of AISI 304 Stainless Steel and Mild Steel
Avinish Tiwari, Piyush Singh, Pardeep Pankaj, Pankaj Biswas, Sachin D. Kore, Sukhomay Pal
Impact Behavior of Polyetheretherketone/Nickel Foam Co-continuous Composites
X. G. Yang, D. L. Duan, X. Zhang, S. L. Jiang, S. Li, H. C. Zhang
Microstructural Development and Mechanical Properties of Friction Stir Welded Ferritic Stainless Steel AISI 409
M. M. Z. Ahmed, Mohamed M. El-Sayed Seleman, Mostafa Shazly, Moataz M. Attallah, Essam Ahmed
Very High-Cycle Fatigue Properties and Residual Stress Relaxation of Micro-shot-Peened EA4T Axle Steel
Jinxin Zhang, Jiwang Zhang, Bing Yang, Xing Li
Fatigue Failure Analysis and Life Prediction of Aeroengine Compressor Components
Yajun Chen, Xuntao Zhang, Fusheng Wang, Xiaoxiao Song, Ailun Wang, Haipeng Song
Effect of Chromium Content on Microstructure, Hardness, and Wear Resistance of As-Cast Fe-Cr-B Alloy
Ye Tian, Jiang Ju, Hanguang Fu, Shengqiang Ma, Jian Lin, Yongping Lei
On the Microstructure and Solidification Behavior of N-Bearing Ti-46Al-8Ta (at.%) Intermetallic Alloys
Soroush Saeedipour, Ahmad Kermanpur
Deformation Behavior and Microstructural Evolution of Reeled Pipeline Steels during Cyclic Plastic Deformation
Yuanbo Jiang, Chengning Li, Xinjie Di, Dongpo Wang, Shuang Lin, Jiangcheng Liu
Corrosion Inhibition of Pipeline Carbon Steel (N80) in CO2-Saturated Chloride (0.5 M of KCl) Solution Using Gum Arabic as a Possible Environmentally Friendly Corrosion Inhibitor for Shale Gas Industry
Gaetano Palumbo, Marcin Górny, Jacek Banaś
A Weighting Grade-Based Optimization Method for Determining Refill Friction Stir Spot Welding Process Parameters
Rafał Kluz, Andrzej Kubit, Tomasz Trzepiecinski, Koen Faes, Wojciech Bochnowski
Microstructure and Mechanical Properties of Ni-based Superalloy K418 Produced by the Continuous Unidirectional Solidification Process
Fan Yang, Jiang Wang, Jianbo Yu, Zhenghua Zhou, Baojun Wang, Tingsheng Tu, Xingfu Ren, Kang Deng, Zhongming Ren
Significance of Finish Cooling Temperature to Microstructure and Property Relationship of Low-Carbon V-N-Cr Microalloyed High-Strength Steel
Yue Liu, Lin-Xiu Du, Bin Zhang, Hong-Yan Wu, R. D. K. Misra
Constitutive Modeling of High-Temperature Flow Stress of Armor Steel in Ballistic Applications: A Comparative Study
Ambuj Saxena, A. Kumaraswamy, Nitin Kotkunde, Kurra Suresh
Comparative Study of the Geometric Effects on Fracture Behaviors of Side-Grooved and Plain-Sided Compact Tension Specimens
Jianfeng Mao, Xiangyang Li, Shiyi Bao, Lijia Luo, Zhenyu Ding
Constitutive Modeling for Hot Working Behavior of SP-700 Titanium Alloy
Amir Hossein Sheikhali, Maryam Morakkabati, Seyed Mahdi Abbasi
Fatigue of Composite Materials Subjected to Variable Loadings
America Califano, Luigi Grassia, Alberto D’Amore
Multiscale Modeling of Microstructural Evolution in Fused-Coating Additive Manufacturing
R. W. Geng, J. Du, Z. Y. Wei, G. X. Zhao, J. D. Ni