Ausgabe 3/2019
Special Issue Focus: Nanotechnology
Inhalt (62 Artikel)
The Atomic Structure of Ti2C and Ti3C2 MXenes is Responsible for Their Antibacterial Activity Toward E. coli Bacteria
Agnieszka Maria Jastrzębska, Ewa Karwowska, Tomasz Wojciechowski, Wanda Ziemkowska, Anita Rozmysłowska, Leszek Chlubny, Andrzej Olszyna
Structural and Mechanical Properties of the ZrC/Ni-Nanodiamond Coating Synthesized by the PVD and Electroplating Processes for the Cutting Knifes
V. Chayeuski, V. Zhylinski, O. Cernashejus, N. Visniakov, G. Mikalauskas
Syntheses and Characterization of Intermetallic Nanostructures Based on Mn
M. Dakiche, L. Belaid, H. Zergane, N. Fortas, M. Zergoug, M. Azzaz
Understanding Microstructural Evolution During Rapid Heat Treatment of Microalloyed Steels Through Computational Modeling, Advanced Physical Simulation, and Multiscale Characterization Techniques
B. M. Whitley, J. G. Speer, R. Cryderman, J. Klemm-Toole
Microstructural Evolution and Toughness of the Various HAZs in 1300-MPa-Grade Ultrahigh-Strength Structural Steel
Changfei Wen, Xiangtao Deng, Yong Tian, Zhaodong Wang, Raja Devesh Kumar Misra
Effects of Solution Treatment on Microstructure Transformation, Tensile and Exfoliation Corrosion Properties of 7136 Aluminum Alloy
Junlong Zhang, Jingyuan Li, Shaokun Tian, Dan Lv
Texture Evolution and Its Effect on Fatigue Crack Propagation in Two 2000 Series Alloys
Fei Liu, Zhiyi Liu, Meng Liu, Yangcheng Hu, Ye Chen, Song Bai
Influence of Thermal Treatment on the Microstructure, Mechanical Properties, and Corrosion Resistance of Newly Developed Ti20Nb13Zr Biomedical Alloy in a Simulated Body Environment
M. A. Hussein, M. Azeem, A. Madhan Kumar, N. Al-Aqeeli, N. K. Ankah, A. A. Sorour
Characterization of Directional Elastoplastic Properties of Al/Cu Bimetallic Sheet
Robert Uscinowicz
Protective Performance of Plasma-Enhanced Chemical Vapor-Deposited Ethyl Cyclohexane Coating on Magnesium Alloys
Srinivasan Arthanari, Antony Ananth, Jin-Hyo Boo, Kwang Seon Shin
Computational Modeling of Fracture Toughness of Al-Si and Al-Zn-Mg-Cu Alloys with Detected Porosity
Jarosław Piekło, Aldona Garbacz-Klempka, Robert Żuczek, Marcin Małysza
Effect of Grain Refining on Properties of a Cast Superaustenitic Stainless Steel
Dustin A. Arvola, Mark C. Emmendorfer, Ronald J. O’Malley, Simon N. Lekakh, Laura N. Bartlett
Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel
Nand Kumar Patel, Mahesh Gulab Walunj, B. Ravi Kumar
Effect of pH on Corrosion Performance of Cu-Se and Cu-Se-Te Alloys in 3.5% Sodium Chloride Solution
Ruijie Huang, Dachuan Zhu
Effects of Nb on Superelasticity and Low Modulus Properties of Metastable β-Type Ti-Nb-Ta-Zr Biomedical Alloys
Juan Chen, Fengcang Ma, Ping Liu, Chaohu Wang, Xinkuan Liu, Wei Li, Qingyou Han
Glass-Forming Ability, Thermal Stability, and Hardness of Rapidly Solidified Al-Ni-Y-Sc Alloy Ribbons and Rods
Chih-Yuan Chen, Shih-Fan Chen, Jun-Huang Zhang
Experimental and Numerical Investigations of Cyclic Plastic Deformation of Al-Mg Alloy
Pankaj Kumar, Akhilendra Singh
In Vitro Degradation, Antibacterial Activity and Cytotoxicity of Mg-3Zn-xAg Nanocomposites Synthesized by Mechanical Alloying for Implant Applications
Mahmood Razzaghi, Masoud Kasiri-Asgarani, Hamid Reza Bakhsheshi-Rad, Hamid Ghayour
Electrochemical Properties of Commercially Pure Ti with TiB/TiB2 Coatings in Hanks’ Balanced Salt Solution
Adib Ebrahimi, Hamid Esfahani, Arash Fattah-alhosseini, Omid Imantalab
Corrosion of 907 Steel Influenced by Sulfate-Reducing Bacteria
Juna Chen, Jiajia Wu, Peng Wang, Dun Zhang, Shiqiang Chen, Faqi Tan
Evolution of Crystallographic Structure of M23C6 Carbide Under Thermal Aging of P91 Steel
Arūnas Baltušnikas, Albertas Grybėnas, Rita Kriūkienė, Irena Lukošiūtė, Vidas Makarevičius
Tribological Properties of Cr(Si)CN Coatings Sliding Against Different Mating Balls in Water
Zhiwei Wu, Qianzhi Wang, Fei Zhou
Structure and Tribological Properties of CrTiAlCN Coatings with Various Carbon Contents
Maoda Zhang, Fei Zhou, Haotian Fang, Zhiwei Wu, Qianzhi Wang, Jizhou Kong
Structure, Morphology, and Mechanical Properties of AlCrN Coatings Deposited by Cathodic Arc Evaporation
Adam Gilewicz, Roman Jedrzejewski, Piotr Myslinski, Bogdan Warcholinski
Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior
Sima A. Alidokht, Jacques Lengaigne, Jolanta E. Klemberg-Sapieha, Steve Yue, Richard R. Chromik
Microstructure and Properties of AlCoCrFeNiTi High-Entropy Alloy Coating on AISI1045 Steel Fabricated by Laser Cladding
Hao Liu, Jian Liu, Peijian Chen, Haifeng Yang, Jingbin Hao, Xianhua Tian
Effects of the Addition of Micro-amounts of Calcium on the Corrosion Resistance of Mg-0.1Mn-1.0Zn-xCa Biomaterials
Jin Wang, Jing-Yuan Li, Yuan Zhang, Wei-Ming Yu
Microstructure and Mechanical Characterization of Incoloy 925 Welds in the As-Welded and Direct Aged Conditions
S. Sujai, K. Devendranath Ramkumar
Study on Tensile Deformation Behavior of TC21 Titanium Alloy
Song Zhang, Yilong Liang, Qifan Xia, Meigui Ou
Multiaxial creep–fatigue Life Prediction Under Variable Amplitude Loading at High Temperature
Xiao-Wei Wang, De-Guang Shang, Zhen-Kun Guo
Nonlinear Creep Deformation of Polycarbonate at High Stress Level: Experimental Investigation and Finite Element Modeling
Daiki Ikeshima, Akihiro Matsuzaki, Takumi Nagakura, Kanako Emori, Akio Yonezu
Experimental Investigation and Numerical Study on the Elimination of Porosity in Aluminum Alloy Laser Welding and Laser–GMA Welding
Lijin Huang, Xueming Hua, Dongsheng Wu, Li Fang
Experimental Analysis of the Crushing of Honeycomb Cores Under Compression
Boubekeur Mohammed Bilel Mertani, Boualem Keskes, Mostapha Tarfaoui
Development of Low-Alloy Steels with High Strength and Good Ductility with the Aid of Nanoscale Troostite
J. W. Liang, X. Wang, X. L. Zhang, Y. F. Shen
Wear and Corrosion Behavior of Graphene-Nanoplate-Reinforced Copper Matrix Composites Prepared Through Electrostatic Self-Assembly
Ke Zhang, Guosen Shao, Wei Li, Xiaohong Chen, Fengcang Ma, Ping Liu
Significant Contribution to Strength Enhancement from Deformation Twins in Thermomechanically Processed Al0.1CoCrFeNi Microstructures
Sindhura Gangireddy, Daniel Whitaker, Rajiv S. Mishra
Tribological Properties of Typical Zeolitic Imidazolate Frameworks as Grease-Based Lubricant Additives
Min Yuan, Yu Zhao, Wenxing Niu, Qi Shi, Hong Xu, Bin Zheng, Jinxiang Dong
Effect of Silicon Content on the Hardenability and Mechanical Properties of Link-Chain Steel
Zhenhua Wang, Jianjun Qi, Yi Liu
Dry Sliding Wear Behavior and Mechanism of a Hot-Dip Aluminized Steel as a Function of Sliding Velocity
Yubiao Yang, Benguo Zhang, Wei Jiang, Shuqi Wang
Corrosion Behavior of Pipeline Steel with Different Microstructures Under AC Interference in Acid Soil Simulation Solution
M. Zhu, Y. F. Yuan, S. M. Yin, G. H. Yu, S. Y. Guo, Y. Z. Huang, C. W. Du
Sulfide Stress Corrosion Cracking Behavior of G105 and S135 High-Strength Drill Pipe Steels in H2S Environment
Sheji Luo, Ming Liu, Yi Shen, Xiuzhou Lin
Bioceramic Coating Produced on AZ80 Magnesium Alloy by One-Step Microarc Oxidation Process
Ying Xiong, Zengyuan Yang, Xiaxia Hu, Renguo Song
Effects of Chloride and Carbonate on Corrosion of API-X100 Pipeline Steel
Faysal Fayez Eliyan, Hatem M. Alsyouri
Planar Anisotropy, Tension–Compression Asymmetry, and Deep Drawing Behavior of Commercially Pure Titanium at Room Temperature
P. Lin, Y. G. Hao, B. Y. Zhang, C. Z. Chi, X. L. Cui, J. Shen, D. S. Gao
Effect of Cu Interlayer on the Microstructure and Strength for Brazing of Tungsten/316L Steel
Meng Wang, Yuanting Chen, Xianfen Li, Peng Hua, Linfeng Gao, Wei Zhou, Yucheng Wu
The Effect of Casting Speed on Microstructure, Microsegregation, and Mechanical Properties of High-Strength Mg-Nd-Zn-Zr Alloy
Xingwei Zheng, Peng Luo, Jie Dong, Shiming Wang
Structure and Mechanical Properties of Steel in the Process “Pressing–Drawing”
Abdrakhman Naizabekov, Irina Volokitina, Andrey Volokitin, Evgeniy Panin
Influence of Rolling Temperature on the Mechanical Properties and Microstructure of Variable-Plane-Rolled Mg-3Al-1Zn Alloy
Zhuang Wang, Mirzat Mamatzunun, Yuhan Wu, Yanjun Wu, Cunjian Bian, Rong Zhu
A Comparison of the Fatigue Life of Shot-Peened 4340M Steel with 100, 200, and 300% Coverage
A. AlSumait, Y. Li, M. Weaser, K. Niji, G. Battel, R. Toal, C. Alvarez, O. S. Es-Said
Influence of Welding Speed on Zigzag Line Feature and Tensile Property of a Friction-Stir-Welded Al-Zn-Mg Aluminum Alloy
Huijie Zhang, Shaohua Luo, Wei Xu
Effect of Martensite Content on Failure Behavior of Laser Welded Dual-Phase Steel Joints During Deformation
Peng-Cheng Huan, Xiao-Nan Wang, Lei Yang, Zhi Zheng, Zeng-Rong Hu, Min Zhang, Chang-Jun Chen
Effect of Heat Input on M-A Constituent and Toughness of Coarse Grain Heat-Affected Zone in an X100 Pipeline Steel
Xiao-Nan Wang, Yan-Jun Zhao, Peng-Fei Guo, Xiao-Nan Qi, Hong-Shuang Di, Min Zhang, Chang-Jun Chen
Statistical Strength Analysis of Dissimilar AA2024-T6 and AA6061-T6 Friction Stir Welded Joints
Reza Taghiabadi, Niloufar Aria
Development of Multilayer Sinter Cladding of Cold Work Tool Steel on Hadfield Steel Plates for Wear-Resistant Applications
P. K. Farayibi, M. Blüm, W. Theisen, S. Weber
Nonuniformity in Mechanical Properties of Linear Friction Welded Mild Steel Joint
Peihao Geng, Guoliang Qin, Jun Zhou, Zengda Zou
Corrosion Behavior of Plasma-Nitrided 904L Austenitic Stainless Steel in Hydrofluoric Acid
Ruyi Jiang, Guobo Zou, Wei Shi, Yu Liang, Song Xiang
Surface Modification of High-Carbon Steel Using Fiber Laser and Its Thermal, Microstructural and Tribological Analysis
Mohammad Shahid Raza, Susmita Datta, Kumar Vivekanand, Partha Saha
Precipitation of Carbides and Dissolution of Widmanstätten Structure for Enhanced Hardness in Ti2AlNb-Based Alloys
Yaran Zhang, Qi Cai, Yongchang Liu, Qianying Guo, Huijun Li