Ausgabe 6/2010
Inhalt (21 Artikel)
Effects of Speeds, Materials, and Tool Rake Angles on Metallic Particle Emission During Orthogonal Cutting
Riad Khettabi, Victor Songmene, Jacques Masounave
Modeling of Particle Emission During Dry Orthogonal Cutting
Riad Khettabi, Victor Songmene, Imed Zaghbani, Jacques Masounave
Structural-Response Analysis, Fatigue-Life Prediction, and Material Selection for 1 MW Horizontal-Axis Wind-Turbine Blades
M. Grujicic, G. Arakere, E. Subramanian, V. Sellappan, A. Vallejo, M. Ozen
Comparison of the Stress Intensity Factor of Load-Carrying Cruciform Welded Joints with Different Geometries
A. Al-Mukhtar, H. Biermann, S. Henkel, P. Hübner
Dry Sliding Wear Properties of a 7075-T6 Aluminum Alloy Coated with Ni-P (h) in Different Pretreatment Conditions
Jothi Sudagar, K. Venkateswarlu, Jainshe Lian
Full-thickness Backside Circuit Editing for ASICS on Laminated Packages
David W. Niles, Ronald W. Kee, Chad Rue
Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate
Ph. Lequeu, K. P. Smith, A. Daniélou
Improved Wear Resistance of Low Carbon Steel with Plasma Melt Injection of WC Particles
Aiguo Liu, Mianhuan Guo, Hailong Hu
The Effect of the Surface Treating and High-Temperature Aging on the Strength and SCC Susceptibility of 7075 Aluminum Alloy
Hamidreza Fooladfar, Babak Hashemi, Mousa Younesi
Dissolution of Eutectic β-Mg17Al12 Phase in Magnesium AZ91 Cast Alloy at Temperatures Close to Eutectic Temperature
Tianping Zhu, Zhan W. Chen, Wei Gao
Influence of Direct Quenching on Microstructure and Mechanical Properties of Steel Plate for Large Oil Storage Tanks
Guizhi Xiao, Hongshuang Di, Fuxian Zhu, Bingzhang Chen, Bing Qiu
Effect of Boron Additions on Sintering and Densification of a Ferritic Stainless Steel
J. A. Cabral Miramontes, J. D. O. Barceinas Sánchez, F. Almeraya Calderón, A. Martínez Villafañe, J. G. Chacón Nava
The Effect of Coating Thickness on Corrosion Resistance of Hydroxyapatite Coated Ti6Al4V and 316L SS Implants
B. Aksakal, M. Gavgali, B. Dikici
Understanding and Modeling the Resistance of High Aspect Ratio FIB-Fabricated Tungsten Vias
David W. Niles, Walter Dauksher, Ronald W. Kee
Effect of Milling Time on Electrical Breakdown Behavior of Al2O3/Cu Composite
Xianhui Wang, Shuhua Liang, Ping Yang, Zhikang Fan
Development of Polymer Network of Phenolic and Epoxies Resins Mixed with Linseed Oil: Pilot Study
H. Ku, F. Cardona, D. Rogers, J.-C. Munoz