Skip to main content
main-content

Zeitschrift

Journal of Materials Science

Journal of Materials Science 2/2015

Ausgabe 2/2015

Inhaltsverzeichnis ( 50 Artikel )

01.01.2015 | Review | Ausgabe 2/2015 Open Access

Performing elemental microanalysis with high accuracy and high precision by scanning electron microscopy/silicon drift detector energy-dispersive X-ray spectrometry (SEM/SDD-EDS)

Dale E. Newbury, Nicholas W. M. Ritchie

01.01.2015 | Original Paper | Ausgabe 2/2015

Fully coupled thermal–electric-sintering simulation of electric field assisted sintering of net-shape compacts

Brandon McWilliams, Jian Yu, Antonios Zavaliangos

01.01.2015 | Original Paper | Ausgabe 2/2015

Morphological properties of nanofibrillated cellulose produced using wet grinding as an ultimate fibrillation process

Oleksandr Nechyporchuk, Frédéric Pignon, Mohamed Naceur Belgacem

01.01.2015 | Original Paper | Ausgabe 2/2015

Theoretical calculations of structural, electronic, optical, elastic, and thermal properties of YX3 (X = In, Sn, Tl, and Pb) compounds based on density functional theory

Jisha Annie Abraham, Gitanjali Pagare, Sunil Singh Chouhan, Sankar P. Sanyal

01.01.2015 | Original Paper | Ausgabe 2/2015

Synthesis and characterization of low band gap random copolymers based on cyclopentadithiophene and thiophene carboxylates for photovoltaic applications

Renchu Scaria, Farman Ali, S. K. Dhawan, Suresh Chand

01.01.2015 | Original Paper | Ausgabe 2/2015

Glassy carbon nanofibers from electrospun cellulose nanofiber

Yingying Liu, Wang Qin, Qiaoying Wang, Ruilai Liu, Haiqing Liu

01.01.2015 | Original Paper | Ausgabe 2/2015

Sintered reaction-bonded silicon nitride foams with a high level of interconnected porosity

Ali Alem, Robin A. L. Drew, Martin D. Pugh

01.01.2015 | Original Paper | Ausgabe 2/2015

Synthesis and characterisation of nanostructured silica-powellite-HAP composites

O. Ponta, R. Ciceo-Lucacel, A. Vulpoi, T. Radu, V. Simon, S. Simon

01.01.2015 | Original Paper | Ausgabe 2/2015

Thermophysical investigations of exfoliated graphite nanoplatelets and active carbon in binary aqueous environments at different temperatures

Ion Ion, Florinela Sirbu, Alina Catrinel Ion

01.01.2015 | Original Paper | Ausgabe 2/2015

New insight into lamellar branching of β-nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS study

Zhongzhu Liu, Xianhu Liu, Guoqiang Zheng, Kun Dai, Chuntai Liu, Changyu Shen

01.01.2015 | Original Paper | Ausgabe 2/2015

Gold-functionalized graphene as conductive filler in UV-curable epoxy resin

M. Martin-Gallego, M. A. Lopez-Manchado, P. Calza, I. Roppolo, M. Sangermano

01.01.2015 | Original Paper | Ausgabe 2/2015

A mechanochemical approach to manufacturing bamboo cellulose nanocrystals

Qilin Lu, Wenyi Lin, Lirong Tang, Siqun Wang, Xuerong Chen, Biao Huang

01.01.2015 | Original Paper | Ausgabe 2/2015

Structural, magnetic, and magnetocaloric studies of La0.67Ba0.22Sr0.11Mn1−x Co x O3 manganites

F. Ben Jemaa, S. Mahmood, M. Ellouze, E. K. Hlil, F. Halouani

01.01.2015 | Ausgabe 2/2015 Open Access

Fabrication and thermo-mechanical behavior of ultra-fine porous copper

Marius Kreuzeder, Manuel-David Abad, Mladen-Mateo Primorac, Peter Hosemann, Verena Maier, Daniel Kiener

01.01.2015 | Original Paper | Ausgabe 2/2015

The role of catalytic cobalt-modified lanthanum ferrite nano-crystals in selective sensing of carbon monoxide

K. K. Bhargav, S. Ram, S. B. Majumder

01.01.2015 | Original Paper | Ausgabe 2/2015

Influence of raw carbon nanotubes diameter for the optimization of the load composition ratio in epoxy amperometric composite sensors

J. Muñoz, J. Bartrolí, F. Céspedes, M. Baeza

01.01.2015 | Ausgabe 2/2015

Solid-state phase transformation kinetics in the near-equilibrium regime

Yi-Hui Jiang, Feng Liu, Jin-Cheng Wang, Zhong-Hua Zhang

01.01.2015 | Original Paper | Ausgabe 2/2015

Approximated equations for molar volumes of pure solid fcc metals and their liquids from zero Kelvin to above their melting points at standard pressure

George Kaptay

01.01.2015 | Original Paper | Ausgabe 2/2015

Optimisation of high thermal conductivity Al/diamond composites produced by gas pressure infiltration by controlling infiltration temperature and pressure

Yang Zhang, Jianwei Li, Lili Zhao, Xitao Wang

01.01.2015 | Original Paper | Ausgabe 2/2015

Synthesis, characterization, and properties of a novel polyhedral oligomeric octamethyldiphenylsulfonylsilsesquioxane

Ziqian Li, Dinghua Li, Rongjie Yang

01.01.2015 | Original Paper | Ausgabe 2/2015

Effect of PEO–PPO–PEO triblock copolymers in the synthesis of magnetic nanoparticles embedded in SiO2 and TiO2 matrices by sol–gel method

Guadalupe Valverde-Aguilar, José Luis Pérez-Mazariego, Vivianne Marquina, Raúl Gómez, Manuel Aguilar-Franco, Jorge Garcia-Macedo

01.01.2015 | Original Paper | Ausgabe 2/2015

One-pot synthesis of hollow mesoporous carbon materials and their drug release properties

Wenjing Liu, Fengling Zhu, Yuxin Liu, Yeping Xu, Shaomin Liu

01.01.2015 | Original Paper | Ausgabe 2/2015

Torrefied biomass filled polyamide biocomposites: mechanical and physical property analysis

Jessica L. Vold, Chad A. Ulven, Bret J. Chisholm

01.01.2015 | Original Paper | Ausgabe 2/2015

Preparation of high-porous SiC ceramics from polymeric composites based on diatomite powder

E. P. Simonenko, N. P. Simonenko, M. A. Zharkov, N. L. Shembel, I. D. Simonov-Emel’yanov, V. G. Sevastyanov, N. T. Kuznetsov

01.01.2015 | Original Paper | Ausgabe 2/2015

A 3D cellular automata model of the abnormal grain growth in austenite

Ye. Vertyagina, M. Mahfouf

01.01.2015 | Original Paper | Ausgabe 2/2015

Flexible-structured systems made of ceramic fibers containing Pt-NaY zeolite used as CO oxidation catalysts

J. P. Cecchini, E. D. Banús, S. A. Leonardi, M. A. Zanuttini, M. A. Ulla, V. G. Milt

01.01.2015 | Original Paper | Ausgabe 2/2015

Preparation of a gold electrode modified with Au–TiO2 nanoparticles as an electrochemical sensor for the detection of mercury(II) ions

Lan Zhou, Wei Xiong, Shantang Liu

01.01.2015 | Original Paper | Ausgabe 2/2015

Fabrication of quaternary Cu2FeSnS4 (CFTS) nanocrystalline fibers through electrospinning technique

Faruk Ozel, Mahmut Kus, Adem Yar, Emre Arkan, Mustafa Can, Abdalaziz Aljabour, Nurhan Mehmet Varal, Mustafa Ersoz

01.01.2015 | Original Paper | Ausgabe 2/2015

Through-thickness distributions of residual stresses in an 80 mm thick weld using neutron diffraction and contour method

W. Woo, G. B. An, V. T. Em, A. T. De Wald, M. R. Hill

01.01.2015 | Original Paper | Ausgabe 2/2015

Effect of blending with polyamidoamine (PAMAM) dendrimer on the toughness of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV)

Yu-Juan Jin, Yun-Xuan Weng, Xue-Xin Li, Min Zhang, Xiu-Lan Xin

01.01.2015 | Original Paper | Ausgabe 2/2015

Compounds based on Group 14 elements: building blocks for advanced insulator dielectrics design

A. Mannodi-Kanakkithodi, C. C. Wang, R. Ramprasad

01.01.2015 | Original Paper | Ausgabe 2/2015

An ultrasonic internal friction study of ultrafine-grained AZ31 magnesium alloy

Martin Koller, Petr Sedlák, Hanuš Seiner, Martin Ševčík, Michal Landa, Jitka Stráská, Miloš Janeček

01.01.2015 | Original Paper | Ausgabe 2/2015

Effect of synthesis medium on aggregation tendencies of ZnO nanosheets and their superior photocatalytic performance

Richa Khokhra, Raj Kumar Singh, Rajesh Kumar

01.01.2015 | Original Paper | Ausgabe 2/2015

The investigation of electron–phonon coupling on thermal transport across metal–semiconductor periodic multilayer films

F. J. Ye, Z. G. Zeng, C. Lin, Z. Y. Hu

01.01.2015 | Original Paper | Ausgabe 2/2015

Enhancement of the power conversion efficiency of polymer solar cells by incorporating PbSe quantum dots

Zhixiao Li, Haowei Wang, Dan Yang, Li Zhang, Yishan Wang, Taojian Song, Chunjie Fu, Hongyu Zhang, Shengyi Yang, Bingsuo Zou

01.01.2015 | Original Paper | Ausgabe 2/2015

Nano lamellae composed of yttrium aluminum garnet and yttrium silicate by surface crystallization of glass

Ashkan Keshavarzi, Christian Bocker, Christian Rüssel

01.01.2015 | Original Paper | Ausgabe 2/2015

Synthesis of highly dispersed silver nanoparticles or nano-network modified KIT-6 using supercritical carbon dioxide

Qin-Qin Xu, Yu-Ling Ma, Gang Xu, Jia-Xuan Ma, Jian-Zhong Yin, Ai-Qin Wang, Jin-Ji Gao

01.01.2015 | Original Paper | Ausgabe 2/2015

The effect of sepiolite on the compatibilization of polyethylene–thermoplastic starch blends for environmentally friendly films

M. D. Samper-Madrigal, O. Fenollar, F. Dominici, R. Balart, J. M. Kenny

01.01.2015 | Original Paper | Ausgabe 2/2015

Structure–property relationship of luminescent zirconia nanomaterials obtained by sol–gel method

José M. Carvalho, Lucas C. V. Rodrigues, Maria C. F. C. Felinto, Luiz A. O. Nunes, Jorma Hölsä, Hermi F. Brito

01.01.2015 | Original Paper | Ausgabe 2/2015

Tensile characterisation of thick sections of Engineered Cement Composite (ECC) materials

S. Boughanem, D. A. Jesson, M. J. Mulheron, P. A. Smith, C. Eddie, S. Psomas, M. Rimes

01.01.2015 | Original Paper | Ausgabe 2/2015

Noncovalent functionalization of carbon nanotubes and graphene with tetraphenylporphyrins: stability and optical properties from ab initio calculations

Walter Orellana, Julián D. Correa

01.01.2015 | Original Paper | Ausgabe 2/2015

Oxaprozin/poly(2-hydroxyethyl acrylate/itaconic acid) hydrogels: morphological, thermal, swelling, drug release and antibacterial properties

Marija M. Babić, Katarina M. Antić, Jovana S. Jovašević Vuković, Bojan Đ. Božić, Sladjana Z. Davidović, Jovanka M. Filipović, Simonida Lj. Tomić

01.01.2015 | Original Paper | Ausgabe 2/2015

Laser micro-patterning of biodegradable polymer blends for tissue engineering

Irina Alexandra Paun, Marian Zamfirescu, Mona Mihailescu, Catalin Romeo Luculescu, Cosmin Catalin Mustaciosu, Ion Dorobantu, Bogdan Calenic, Maria Dinescu

01.01.2015 | Original Paper | Ausgabe 2/2015

An efficient photovoltaic device based on novel D–A–D solution-processable small molecules

Zaifang Li, Qingfeng Dong, Shiyu Yao, Jingyu Qian, Yanling Wang, Fangyuan Jiang, Han Yang, Qing Zhao, Qiufei Hou, Wei Meng, Jinhui Tong, Sixing Xiong, Wenjing Tian

01.01.2015 | Original Paper | Ausgabe 2/2015 Open Access

Determination of bone porosity based on histograms of 3D μCT images

M. Cieszko, Z. Szczepański, P. Gadzała

01.01.2015 | Original Paper | Ausgabe 2/2015

Reassessment of degradation mechanisms in anodic tantalum oxide capacitors under high electric fields

Xin Su, Mark Viste, Joachim Hossick-Schott, Lei Yang, Brian W. Sheldon

01.01.2015 | Original Paper | Ausgabe 2/2015

pH-sensitive superabsorbent polymers: a potential candidate material for self-healing concrete

Arn Mignon, Geert-Jan Graulus, Didier Snoeck, José Martins, Nele De Belie, Peter Dubruel, Sandra Van Vlierberghe

01.01.2015 | Original Paper | Ausgabe 2/2015

High quality oxide-free metallic nanoparticles: a strategy for synthesis through laser ablation in aqueous medium

Kirtiman Deo Malviya, Kamanio Chattopadhyay

01.01.2015 | Original Paper | Ausgabe 2/2015

The effect of second-phase particles on grain refinement during equal-channel angular pressing in an Al–Cu–Mg–Ag alloy

M. Gazizov, S. Malopheyev, R. Kaibyshev

01.01.2015 | Original Paper | Ausgabe 2/2015

Effects of heating rates on microstructure and superplastic behavior of friction stir processed 7075 aluminum alloy

K. Wang, F. C. Liu, P. Xue, B. L. Xiao, Z. Y. Ma

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise