Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 1/2015

Ausgabe 1/2015

Inhaltsverzeichnis ( 51 Artikel )

01.01.2015 | Ausgabe 1/2015

Fracture property of double cantilever beam of aluminum foam bonded with spray adhesive

Moon Sik Han, Hae Kyu Choi, Jae Ung Cho, Chong Du Cho

01.01.2015 | Ausgabe 1/2015

Experimental and numerical investigation on hypervelocity impact response of 2D plain-woven C/SiC composite

Yang Yang, Fei Xu

01.01.2015 | Ausgabe 1/2015

AE analysis of delamination crack propagation in carbon fiber-reinforced polymer materials

Sang-Jae Yoon, Dingding Chen, Seung-Wook Han, Nak-Sam Choi, Kazuo Arakawa

01.01.2015 | Ausgabe 1/2015

Fretting fatigue behavior in railway axle materials

Sung Jong Choi, Young Tae Cho

01.01.2015 | Ausgabe 1/2015

Experimental investigation on the essential work of mixed-mode fracture of PC/ABS alloy

Huimin Li, Guiping Jiang, Qinzhi Fang, Tiejun Wang

01.01.2015 | Ausgabe 1/2015

Real-time detection of surface cracks on silicon wafers during laser beam irradiation

Sungho Choi, Sung-Hee Yoon, Kyung-Young Jhang, Wan-Soon Shin

01.01.2015 | Ausgabe 1/2015

Study on crack propagation of adhesively bonded DCB for aluminum foam using energy release rate

Hyejin Bang, Sang-kyo Lee, Chongdu Cho, Jae Ung Cho

01.01.2015 | Ausgabe 1/2015

Fatigue characteristics of dual-phase steel sheets

Irwan Herman Onn, Norhayati Ahmad, Mohd Nasir Tamin

01.01.2015 | Ausgabe 1/2015

Transmission loss of orthogonally stiffened laminated composite plates

Cheng Shen, Fengxian Xin, Tianjian Lu

01.01.2015 | Ausgabe 1/2015

Fatigue life prediction method for contact wire using maximum local stress

Yongseok Kim, Kiwon Lee, Haochuang Li, Chang-Sung Seok, Jae-Mean Koo, Sam-Young Kwon, Yong Hyeon Cho

01.01.2015 | Ausgabe 1/2015

A three-dimensional statistical damage constitutive model for geomaterials

Hangzhou Li, Hongjian Liao, Guangdong Xiong, Bo Han, Guiping Zhao

01.01.2015 | Ausgabe 1/2015

The prediction of dynamic fatigue life of multi-axial loaded system

Moonyoung Yoon, Kyeungho Kim, Jae Eung Oh, Seong Beom Lee, Kwangseok Boo, Heungseob Kim

01.01.2015 | Ausgabe 1/2015

Analysis of large concrete storage tank under seismic response

Jingyuan Li, Xiaochuan You, Hongcheng Cui, Qiang He, Jinsan Ju

01.01.2015 | Ausgabe 1/2015

Fabrication of omni-directional driving system using unconstrained steel ball

Hyunseok Lee, Yeongmin Na, Taegone Park, Youngtaek Cha, Jongkyu Park

01.01.2015 | Ausgabe 1/2015

Residual stress and electromagnetic characteristics in loop type frequency selective surface embedded hybrid structures

Kyung-Mi Park, Yun-Seok Seo, Heoung-Jae Chun, Ik-Pyo Hong, Yong Bae Park, Yoon-Jae Kim

01.01.2015 | Ausgabe 1/2015

Mechanical properties of CO2/MIG welded structural rolled steel and stainless steel

Jong Young Lim, Myong Jin Yoon, Sang Youn Kim, Hyeon Seung Shin, Tae Gyu Kim

01.01.2015 | Ausgabe 1/2015

Electric field induced variation of temperature and entropy in dielectric elastomers

Liwu Liu, Jinrong Li, Yanju Liu, Jinsong Leng, Junqing Zhao, Jianwen Zhao

01.01.2015 | Ausgabe 1/2015

A study on perforation prediction of metal targets by cylindrical tungsten penetrator

Sangwon Lee, Taeho Yang, Youngshin Lee, Youngwoon Bae

01.01.2015 | Ausgabe 1/2015

Effects of microstructure on material properties of modified 9Cr-1Mo steel subject to creep-fatigue

Mayu Muramatsu, Takayuki Suzuki, Yuji Nakasone

01.01.2015 | Ausgabe 1/2015

Investigation on aerodynamic instability of high-voltage transmission lines under rain-wind condition

Chao Zhou, Yibing Liu, Zhiyong Ma

01.01.2015 | Ausgabe 1/2015

Prediction of the aeromechanics for HART II rotor in descending flight using mixed variational geometrically exact beam analysis

Han-Yeol Ryu, Sang-Joon Shin

01.01.2015 | Ausgabe 1/2015

Support vector machine based estimation of remaining useful life: current research status and future trends

Hong-Zhong Huang, Hai-Kun Wang, Yan-Feng Li, Longlong Zhang, Zhiliang Liu

01.01.2015 | Ausgabe 1/2015

Numerical simulation of the transient ultrasonic wave reflection at a liquid-solid interface

Nadir Maghlaoui, Hakim Djelouah, Mohamed Ourak, Djema Belgroune

01.01.2015 | Ausgabe 1/2015

Dynamic performance analysis of high speed flexible coupling of gas turbine engine transmission system

S. Nagesh, A. M. Junaid Basha, Thakur Dinesh Singh

01.01.2015 | Ausgabe 1/2015

Vibration and noise source identification methods for a diesel engine

Jiaxin Xi, Zengming Feng, Guoqiang Wang, Fei Wang

01.01.2015 | Ausgabe 1/2015

Modeling and control of lateral vibration of an axially translating flexible link

Heonseop Shin, Sungsoo Rhim

01.01.2015 | Ausgabe 1/2015

Damage detection in composite under in-plane load using tap test

Sung Joon Kim

01.01.2015 | Ausgabe 1/2015

Microstructural control of hot rolled strips and their tensile strengths after hot stamping process

Won Ha, Chang-Hoon Lee, Cheol Jae Park

01.01.2015 | Ausgabe 1/2015

Design techniques to improve the performance of a centrifugal pump using CFD

Joon-Hyung Kim, Him-Chan Lee, Jin-Hyuk Kim, Sung Kim, Joon-Yong Yoon, Young-Seok Choi

01.01.2015 | Ausgabe 1/2015

High performance hydraulic design techniques of mixed-flow pump impeller and diffuser

Sung Kim, Kyoung-Yong Lee, Joon-Hyung Kim, Jin-Hyuk Kim, Uk-Hee Jung, Young-Seok Choi

01.01.2015 | Ausgabe 1/2015

Effect of gas temperature on flow rate characteristics of an averaging pitot tube type flow meter

Seung Hwa Yeo, Su Ryong Lee, Choong Hoon Lee

01.01.2015 | Ausgabe 1/2015

Effect of guide vanes on recovering uniform flow in a ventilation duct in an existing twin-track subway tunnel

Makhsuda Juraeva, Kyung Jin Ryu, Sang-Hyun Jeong, Dong Joo Song

01.01.2015 | Ausgabe 1/2015

Numerical and experimental investigations on the cavitation characteristics of a high-speed centrifugal pump with a splitter-blade inducer

XiaoMei Guo, Linhang Zhu, ZuChao Zhu, BaoLing Cui, Yi Li

01.01.2015 | Ausgabe 1/2015

Two-step design process for optimal suction muffler in reciprocating compressor

Kee Seung Oh, Jin Woo Lee

01.01.2015 | Ausgabe 1/2015

Robust estimation of support vector regression via residual bootstrap adoption

Won-Young Choi, Dong-Hoon Choi, Kyung-Joon Cha

01.01.2015 | Ausgabe 1/2015

Fatigue life of stainless steel 304 enhancement by addition of multi-walled carbon nanotubes (MWCNTs)

Rizwanulhaque Syed, Wei Jiang, Cunshan Wang, M. Iqbal Sabir

01.01.2015 | Ausgabe 1/2015

P1-Nonconforming shell element and its application to topology optimization

Chen Lei, Tae Hyun Baek, Gang-Won Jang

01.01.2015 | Ausgabe 1/2015

Load sharing and distributed on the gear flank of wind turbine planetary gearbox

Young-Jun Park, Jeong-Gil Kim, Geun-Ho Lee, Sung Bo Shim

01.01.2015 | Ausgabe 1/2015

Reducing particle loss in a critical orifice and an aerodynamic lens for focusing aerosol particles in a wide size range of 30 nm — 10 μm

Tae-Hyun Hwang, Seok-Hwan Kim, Soo Hyung Kim, Donggeun Lee

01.01.2015 | Ausgabe 1/2015

Size-dependent dynamic stability analysis of microbeams actuated by piezoelectric voltage based on strain gradient elasticity theory

Saeid Sahmani, Mohsen Bahrami

01.01.2015 | Ausgabe 1/2015

Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime

Sungho Choi, Kyung-Young Jhang

01.01.2015 | Ausgabe 1/2015

3-D numerical evaluation of residual stress and deformation due welding process using simplified heat source models

Amir Hossein Eslampanah, Mohammad Ebrahim Aalami-aleagha, Saeid Feli, Mohammad Reza Ghaderi

01.01.2015 | Ausgabe 1/2015

Study of energy distribution to electrodes in a micro-EDM process by utilizing the electro-thermal model of single discharges

Kien Trung Hoang, Satish Kumar Gopalan, Seung-Han Yang

01.01.2015 | Ausgabe 1/2015

The application of imperialist competitive algorithm for optimization of deposition rate in submerged arc welding process using TiO2 nano particle

Mohammad Reza Ghaderi, Masood Aghakhani, Amirhossein Eslampanah, Kianoosh Ghaderi

01.01.2015 | Ausgabe 1/2015

Maskless laser direct imaging lithography using a 355-nm UV light source in manufacturing of flexible fine dies

Kitaek Ryoo, Minwook Kim, Jinwoo Sung, Kwangho Kim, Myungchang Kang

01.01.2015 | Ausgabe 1/2015

Voronoi diagram and microstructure of weldment

Jungho Cho

01.01.2015 | Ausgabe 1/2015

Characteristics of tool wear in a combined double cup extrusion process

Jeong Hoon Noh, Beong Bok Hwang

01.01.2015 | Ausgabe 1/2015

Energy-saving in excavators with application of independent metering valve

Kyujeong Choi, Jaho Seo, Yongyun Nam, Kyeong Uk Kim

01.01.2015 | Ausgabe 1/2015

Virtual excavator simulator featuring HILS and haptic joysticks

Yun-Joo Nam, Myeong-Kwan Park

01.01.2015 | Ausgabe 1/2015

Emission and heat recovery characteristics of combustor-type CO2 generator with an after-treatment device and regenerative heating device for greenhouses

Byungchul Choi, Jung-Hyun Lee

01.01.2015 | Ausgabe 1/2015

Flame extinction in interacting CO-air and syngas-air premixed flames

Jisoo Ha, Jeong Park, Oh Boong Kwon, In Gweon Lim, Jin Han Yun, Sang In Keel, Ho Young Park, Tae Hyung Kim

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise