Ausgabe 10/2019
Inhalt (54 Artikel)
Design and verification of a micro piezoelectric motor with energy harvesting characteristic for capsule endoscope
Chong Li, Rong Min, Cunyue Lu, Chaodong Li
Finite element model updating of jointed structure based on modal and strain frequency response function
Zhan Ming, Guo Qintao, Yue Lin, Zhang Baoqiang
A new dynamic balancing method of spindle based on the identification energy transfer coefficient
Xialun Yun, Xuesong Mei, Gedong Jiang, Baomin Wang
Identification of elastomeric isolator parameters on air-borne EO/IR camera with multi-axis gimbal
Sang-won Kim, Sung-kie Youn, Ik-jin Lee, Sang-eun Lee
Analysis and design of a torsional vibration isolator for rotating shafts
Seong Mun Kim, Jung Ryeol Hong, Hong Hee Yoo
Active control of harmonic noise propagated through openings of an enclosure with phase compensator
Jeong-Mo Ku, Weui-Bong Jeong, Sumin Ji, Chinsuk Hong
Dynamic performance of a rotor system with an initial bow and coupling faults of imbalance-rub during whirling motion
Yang Yang, Yiren Yang, Huajiang Ouyang, Xin Li, Dengqing Cao
Comments on the stability of the synchronous states of three vibrators in a vibrating system with two rigid frames
Xueliang Zhang, Zhihui Wang, Chao Li, Jinlin Xu
Influence of conical degree on the performance of radial and axial integrated auxiliary bearing for active magnetic bearing system
Chengtao Yu, Yuemei Sun, Hongchang Wang, Fan Shi, Yu Chen, Wentao Shan
Numerical and experimental analysis of hybrid lubrication regime for internal gear motor and pump
Trong Hoa Pham, Jürgen Weber, Lutz Müller, Dinh Tu Nguyen
Experimental investigations into fretting wear and damage mechanisms of Inconel X-750 alloy
Ibrohim Rustamov, Fei Guo, Zixi Wang
Finite element analysis and mathematical characterization of contact pressure distribution in bolted joints
Jianbin Cao, Zhousuo Zhang
Fatigue strength prediction of TC4 titanium alloy following foreign object damage based on contour feature
X. T. Hu, Y. W. Wan, R. Jiang, Y. D. Song
Repairing cracked aluminum plates by aluminum patch using diffusion method
Sobhan Dehghanpour, Alireza Nezamabadi, Mohammadmahdi Attar, Farzan Barati, Mehdi Tajdari
NDE characterization and inspection techniques of trailing edges in wind turbine blades using terahertz waves
Kwang-Hee Im, Sun-Kyu Kim, Jong-An Jung, Young-Tae Cho, Yong-Deuck Wood, Chien-Ping Chiou
Development of PMMA/TiO2 nanocomposites as excellent dental materials
Md. Alamgir, Ashis Mallick, G. C. Nayak, Santosh K. Tiwari
Homogenization-based multiscale analysis for equivalent mechanical properties of nonwoven carbon-fiber fabric composites
Haksung Lee, Chan-woong Choi, Ji-won Jin, Mongyoung Huh, Seungpyo Lee, Ki-weon Kang
Influence of roughness on the behavior of three-dimensional journal bearing based on fluid-structure interaction approach
Mohammad Tauviqirrahman, Brain Choirul Ichsan, Jamari, Muchammad
Crystal elasticity analysis of contact fatigue behavior of a wind turbine gear
Hao Zhou, Peitang Wei, Huaiju Liu, Caichao Zhu, Wei Wang
A study on fracture behavior due to crack propagation at compact tension specimen composed of inhomogeneous metal materials with holes near crack
Kye Kwang Choi, Jung Ho Lee, Jae Ung Cho
Creep deformation characteristics of microalloyed HP40Nb steel at 950 °C
Van Hung Dao, Jung Soo Song, Joo Yong Kim, Kee Bong Yoon
Optimum angles of non-standard diffusers and reducers for engineering application
Soon-Ho Choi, Sedong Kim, Jaehyuk Choi, Ji-Tae Park, Hyomin Jeong
Experimental and numerical study of the performance and cavitation flow of centrifugal pump with jetting device
Baoling Cui, Kaicheng Zhu, Yuliang Zhang, Peifeng Lin
Optimization of pre-swirl nozzle shape and radial location to increase discharge coefficient and temperature drop
Hyungyu Lee, Jungsoo Lee, Donghwa Kim, Jinsoo Cho
An automatic multi-objective optimization tool for the optimum design of a cracked pressure vessel with composite coating
Seyed Mohammad Navid Ghoreishi, Mahdi Fakoor, Mohammad Aminjafari
Improved trajectory similarity-based approach for turbofan engine prognostics
Cheng-Geng Huang, Hong-Zhong Huang, Weiwen Peng, Tudi Huang
Stress concentration around of pin-loaded hole in unidirectional multi-layered metallic matrix composite material
Sajjad Dehghanpour, Keivan Hosseini Safari, Farzan Barati, Mohammadmahdi Attar
Isomorphic identification for kinematic chains using variable high-order adjacency link values
Leiying He, Faxin Liu, Liang Sun, Chuanyu Wu
The mesh density effect on stress intensity factor calculation using ABAQUS XFEM
Ji-Su Kim, Hyun-Jae Lee, Yun-Jae Kim, Yong-Beum Kim
Analysis of fluid flow and heat transfer of nanofluid inside triangular enclosure equipped with rotational obstacle
Ali Akbar Abbasian Arani, Mehrdad Kazemi
FSW of low carbon steel using tungsten carbide (WC-10wt.%Co) based tool material
Avinish Tiwari, Piyush Singh, Pardeep Pankaj, Pankaj Biswas, Sachin D. Kore
A novel planar motion generation method based on the synthesis of planetary gear train with noncircular gears
Jun Ye, Xiong Zhao, Ying Wang, XinCheng Sun, JianNeng Chen, XuDong Xia
Modeling, analysis, and experiments of a pause-and-leap jumping robot during takeoff, flight, and landing buffering
Qi Yang, Jing Zhao, Ziqiang Zhang, Bin Chang, Xingkun Liu
A bundled staggering patterned pneumatic muscle actuator for improved working efficiency
Hyuk Jin Lee, Kyeong Ha Lee, Young Min Lee, Hyouk Ryeol Choi, Hyungpil Moon, Ja Choon Koo
Inertia matching analysis of a 5-DOF hybrid optical machining manipulator
Yixuan Kong, Gang Cheng, Feng Guo, Wei Gu, Laibin Zhang
Effects of component geometries and inflow conditions on ejector operational mode
Sang Hun Kang, Jae Gang Kim, Hyuck-Joon Namkoung
Thermal modelling and design of dynamically-controlled heater plates for high temperature processing of 300 mm wafers
Dae Seong Woo, Changwoon Han, Byeng Dong Youn, Kyoung Joon Kim
Heat transfer and flow field features between surface mounted trapezoidal-ribs
Md Shaukat Ali, Naveen Sharma, Andallib Tariq
Experimental study of the seawater fouling on a plate-frame heat exchanger for utilization of waste heat from powerplant
Wonkeun Baik, Rin Yun, Jaehyeok Heo
Analysis of the electric drive mode use and energy flow in hybrid drives of SUVs in urban and extra-urban traffic conditions
Ireneusz Pielecha, Wojciech Cieślik, Jerzy Merkisz
A numerical study on NOx formation behavior in a lean-premixed gas turbine combustor using CFD-CRN method
Truc Huu Nguyen, Jungkyu Park, Seungchai Jung, Shaun Kim
Experimental and numerical investigation on a novel gas turbocharging system for diesel engine power recovery at high altitude
Dengfeng Yang, Li’ang Cao, Yang Liu, Zhilian Zhang
Investigations on CO2 hydrate slurry for transportation in carbon capture and storage
Benedict Prah, Rin Yun
Analytical modeling and sensitivity analysis of the temperature distribution in the planar scanning induction heating based on 2D moving heat source
Feng Li, Jinqiang Ning, Tao Wang, Steven Y. Liang
Erratum to: “Numerical investigation of the transferability of ductile fracture behavior between thin-walled surface-cracked pipe, curved wide plate (CWP) and single edge notched tension (SENT) specimens”
Youn-Young Jang, Ik-Joong Kim, Nam-Su Huh, Ki-Seok Kim, Young-Pyo Kim