Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 12/2016

Ausgabe 12/2016

Inhaltsverzeichnis ( 56 Artikel )

01.12.2016 | Ausgabe 12/2016

Modelling of a rotor-ball bearings system using Timoshenko beam and effects of rotating shaft on their dynamics

J. Metsebo, N. Upadhyay, P. K. Kankar, B. R. Nana Nbendjo

01.12.2016 | Ausgabe 12/2016

Vibration characteristics of a piezoelectric disk laminated with an elastic disk

Chunguang Piao, Jin Oh Kim

01.12.2016 | Ausgabe 12/2016

Dynamic behavior analysis of spur gears with constant & variable excitations considering sliding friction influence

Fuhao Liu, Hanjun Jiang, Shaona Liu, Xuehua Yu

01.12.2016 | Ausgabe 12/2016

Naval-vessel on board equipment base to minimize structure-borne noise

Hyung Suk Han, Kyoung Hyun Lee, Sung Ho Park

01.12.2016 | Ausgabe 12/2016

Investigation on the parameter determination and implementation of a dual-pulse shock test machine using a MR damper

Tae Hyeong Kim, Jong Soo Bae, Chang Won Shul

01.12.2016 | Ausgabe 12/2016

Frequency domain indirect identification of AMB rotor systems based on fictitious proportional feedback gain

Hyeong-Joon Ahn, Chan-Jung Kim

01.12.2016 | Ausgabe 12/2016

Numerical investigation on vibration and noise induced by unsteady flow in an axial-flow pump

Eryun Chen, Zuiling Ma, Gaiping Zhao, Guoping Li, Ailing Yang, Guofang Nan

01.12.2016 | Ausgabe 12/2016

Numerical and experimental analysis of coupled transverse and longitudinal vibration of a marine propulsion shaft

Qianwen Huang, Xinping Yan, Yikun Wang, Cong Zhang, Yong Jin

01.12.2016 | Ausgabe 12/2016

Determination of tensile forces to enhance the supply stability of reinforced fiber

Kunwoo Kim, Jaewook Lee, Jinseok Jang, Myeongsik Jeong, Jooyoung Oh, Hoon Kang, Jiheon Kang, Hyungryul Kim, Wansuk Yoo

01.12.2016 | Ausgabe 12/2016

Evaluation of the cavitation inception speed of the ship propeller using acceleration on its adjacent structure

Hyung Suk Han, Kyoung Hyun Lee, Sung Ho Park

01.12.2016 | Ausgabe 12/2016

Reliability analysis for thermal cutting method based non-explosive separation device

Junwoo Choi, Kukha Hwang, Byungkyu Kim

01.12.2016 | Ausgabe 12/2016

A study on comparisons of composite and conventional steel bogie frames

Jung-Seok Kim, Hyuk-Jin Yoon, Woo-Geun Lee

01.12.2016 | Ausgabe 12/2016

Creep crack growth analysis using C t -parameter for internal circumferential and external axial surface cracks in a pressurized cylinder

Nwe Ni Tun, Hee Seung Yang, Jong Min Yu, Kee Bong Yoon

01.12.2016 | Ausgabe 12/2016

Three-dimensional features of MHD flows turning in a right-angle duct

Yue Yan, Shangjing Yang, Chang Nyung Kim

01.12.2016 | Ausgabe 12/2016

Thermo-fluid dynamic analysis of wet compression process

Abhay Mohan, Palani Kumar Chidambaram, Abhilash Suryan, Heuy Dong Kim

01.12.2016 | Ausgabe 12/2016

Aerodynamic optimization of a high-expansion ratio organic radial-inflow turbine

Yan Li, Xue-song Li, Xiaodong Ren

01.12.2016 | Ausgabe 12/2016

Simulating sympathetic detonation using the hydrodynamic models and constitutive equations

Bohoon Kim, Minsung Kim, Taeboo Sun, Jack J. Yoh

01.12.2016 | Ausgabe 12/2016

Fabrication of artificial arteriovenous fistula and analysis of flow field and shear stress by using μ-PIV technology

Sun Cheol Park, Ryungeun Song, Sunho Kim, Hyun Kyu Kim, Seung-Hyun Kim, Jinkee Lee

01.12.2016 | Ausgabe 12/2016

Axial slit wall effect on the flow instability and heat transfer in rotating concentric cylinders

Dong Liu, Chang-qing Chao, Ying-ze Wang, Fang-neng Zhu, Hyoung-Bum Kim

01.12.2016 | Ausgabe 12/2016

Analysis of performance for centrifugal steam compressor

Seung-Hwan Kang, Changkook Ryu, Han Seo Ko

01.12.2016 | Ausgabe 12/2016

Optimization of a high pressure turbine blade tip cavity with conjugate heat transfer analysis

Jinuk Kim, Young Seok Kang, Dongwha Kim, Jihyeong Lee, Bong Jun Cha, Jinsoo Cho

01.12.2016 | Ausgabe 12/2016

A local level set method based on a finite element method for unstructured meshes

Long Cu Ngo, Hyoung Gwon Choi

01.12.2016 | Ausgabe 12/2016

Characteristics of transmission error and vibration of broken tooth contact

Dong-Hyung Lee, Kyung-Ho Moon, Woong-Yong Lee

01.12.2016 | Ausgabe 12/2016

Numerical and experimental investigation of wind loadings on vertical axis wind turbine blade deflection

Muhammad Muzamil, Mubashir Ali Siddiqui, Jianjun Wu

01.12.2016 | Ausgabe 12/2016

Dynamic relaxation method for nonlinear buckling analysis of moderately thick FG cylindrical panels with various boundary conditions

M. E. Golmakani, M. N. Sadraee Far, M. Moravej

01.12.2016 | Ausgabe 12/2016

Robust target cascading for improving firing accuracy of combat vehicle

Shinyu Kim, Woochul Lim, Hansu Kim, Namhee Ryu, Kihan Kwon, Sunghoon Lim, Seungjae Min, Tae Hee Lee

01.12.2016 | Ausgabe 12/2016

A finite element beam analysis by interface matching

Jinhee Lee

01.12.2016 | Ausgabe 12/2016

Optimal design of the gerotor (2-ellipses) for reducing maximum contact stress

Hyo Seo Kwak, Sheng Huan Li, Chul Kim

01.12.2016 | Ausgabe 12/2016

An assemblability check methodology for the kinematic configurations of automatic transmission planetary gear trains

Hyun Sik Kwon, Ahmet Kahraman

01.12.2016 | Ausgabe 12/2016

New mass optimization technique to achieve low mass BIW designs using optimal material layout methodology on the frontal vehicle crash

Rajasekaran Mohan, V. HariRam, M. Subramanian

01.12.2016 | Ausgabe 12/2016

Assessment of printability for printed electronics patterns by measuring geometric dimensions and defining assessment parameters

Sung Woong Jeon, Cheol Kim, Chung Hwan Kim

01.12.2016 | Ausgabe 12/2016

Effect of loading pattern on longitudinal bowing in flexible roll forming

Jae Hyun Kim, Young Yun Woo, Tae Woo Hwang, Sang Wook Han, Young Hoon Moon

01.12.2016 | Ausgabe 12/2016

Profile-based feature representation method and its application in data exchange from mechanical CAD systems to ship CAD systems

Jinggao Li, Duhwan Mun, Soonhung Han

01.12.2016 | Ausgabe 12/2016

A literature review of lacquer formation in medium-speed and low-speed engines

Sung-Ho Hong

01.12.2016 | Ausgabe 12/2016

Effect of conditioner load on the polishing pad surface during chemical mechanical planarization process

Cheolmin Shin, Hongyi Qin, Seokjun Hong, Sanghyuk Jeon, Atul Kulkarni, Taesung Kim

01.12.2016 | Ausgabe 12/2016

A study on magnetic abrasive deburring of dual micro pattern

Dong-Hyun Jin, Jae-Seob Kwak

01.12.2016 | Ausgabe 12/2016

A study on compound contents for plastic injection molding products of metallic resin pigment

Young-Whan Park, Gyu-Sang Lee, Jae-Seob Kwak

01.12.2016 | Ausgabe 12/2016

Stiffness characteristics of compliant three segment leg with the self-stable region in slow and fast running

Oh-Seok Kwon, Sung-Mok Ha, Dong-Ha Lee

01.12.2016 | Ausgabe 12/2016

Trajectory generation to suppress oscillations in under-constrained cable-driven parallel robots

Sung Wook Hwang, Jeong-Hyeon Bak, Jonghyun Yoon, Jong Hyeon Park, Jong-Oh Park

01.12.2016 | Ausgabe 12/2016

Analysis of thermal performance of an outer-rotor Surface-mounted permanent magnet (SPM) motor for electric vehicles

Hyun Kyu Suh

01.12.2016 | Ausgabe 12/2016

An experimental study on accelerated fouling of aluminum oxide and ferric oxide particles in internally enhanced tubes

Mohammad Zoynal Abedin, Nae-Hyun Kim

01.12.2016 | Ausgabe 12/2016

Numerical study of an 870MW wall-fired boiler using De-NOx burners and an air staging system for low rank coal

Min-Young Hwang, Seok-Gi Ahn, Ho-Chang Jang, Gyu-Bo Kim, Chung-Hwan Jeon

01.12.2016 | Ausgabe 12/2016

Effects of different piezo-acting mechanism on two-stage fuel injection and CI combustion in a CRDi engine

Jinsu Kim, Juwan Kim, Seokcheol Jeong, Sangilk Han, Jinwook Lee

01.12.2016 | Ausgabe 12/2016

Friction losses modeling of piston rings for various combustion pressures in diesel engine

Jonghui Choi, Seokhwon Lee, Sungwook Park

01.12.2016 | Ausgabe 12/2016

Feasibility study of ultra-low NOx Gas turbine combustor using the RML combustion concept

Tien Giap Van, Jeong Jae Hwang, Min Kuk Kim, Kook Young Ahn

01.12.2016 | Ausgabe 12/2016

Program development for performance analysis of a steam turbine system with the use of overload valve

Soo Young Kang, Jeong Jin Lee, Tong Seop Kim, Seong Jin Park, Gi Won Hong, Jun Ho Ahn

01.12.2016 | Ausgabe 12/2016

Explosion characteristics of combustible wood dust in confined system: Analysis using oxygen consumption energy

Yun Seok Kim, Min Chul Lee, Dong Ho Rie

01.12.2016 | Ausgabe 12/2016

Dynamic simulation of a circulating fluidized bed boiler system Part I: Description of the dynamic system and transient behavior of sub-models

Seongil Kim, Sangmin Choi, Jongin Yang

01.12.2016 | Ausgabe 12/2016

Dynamic simulation of a circulating fluidized bed boiler system Part II: Simulation of a boiler system operating in a power plant

Seongil Kim, Sangmin Choi, Jongin Yang

01.12.2016 | Ausgabe 12/2016

Inverse estimation of bi-directional reflectivity in long-wave infrared region by using RPSO algorithm

Wan-Myung Chun, Kuk-Il Han, Jun-Hyuk Choi, Beomsu Shin, Byung-Min Jung, Jong-Jin Shin, Tae-Kuk Kim

01.12.2016 | Ausgabe 12/2016

Two-phase refrigerant distribution in a combining/dividing header of a brazed aluminum evaporator

Nae-Hyun Kim, Ho-Won Byun, Min-Geon Go

01.12.2016 | Ausgabe 12/2016

Development of a program for transient behavior simulation of heavy-duty gas turbines

Jeong Ho Kim, Tong Seop Kim, Seung Jae Moon

01.12.2016 | Ausgabe 12/2016

Performance simulation of the central-receiver solar concentration system based on typical meteorological year data

Hyun Jin Lee, Sang Nam Lee, Jong Kyu Kim

01.12.2016 | Ausgabe 12/2016

Patient-specific simulation for selective liver tumor treatment with noninvasive radiofrequency hyperthermia

Bibin Prasad, You Ho Ha, Seung Ku Lee, Jung Kyung Kim

01.12.2016 | Ausgabe 12/2016

Elbow joint model with active muscle force

Manyong Han, Hyung Yun Choi

01.12.2016 | Erratum | Ausgabe 12/2016

Erratum to “Quantifying coordination between agonist and antagonist muscles during a gait”

Hak-Je Yoo, Taeyong Sim, Ahnryul Choi, Hyun-Joon Park, Heegoo Yang, Hyun Mu Heo, Kum Sook Park, Joung Hwan Mun

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise