Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 5/2019

Ausgabe 5/2019

Inhaltsverzeichnis ( 52 Artikel )

01.05.2019 | Ausgabe 5/2019

Manufacturing quality assurance for a rotate vector reducer with vibration technology

Jingjun Gu, Dishan Huang, Jing Tan, Jinlei Liu, Song Wang, Ming Li, Lin Xiao

01.05.2019 | Ausgabe 5/2019

Effect of pre-tensioned loads to vibration at the ladder tip in raising and lowering processes on a turntable ladder

Van Tinh Nguyen, Thorsten Schmidt, Thomas Leonhardt

01.05.2019 | Ausgabe 5/2019

Optimal oscillation parameters of vibrating screens

Ferenc Safranyik, Bela M. Csizmadia, Attila Hegedus, Istvan Keppler

01.05.2019 | Ausgabe 5/2019

Development of technologies for mountain trams driven through sharp curves

Sung-il Seo, Hyung-suk Mun

01.05.2019 | Ausgabe 5/2019

Novel modeling of circular piezoelectric devices as vibration suppresser and energy harvester

Ahmad Saadatinasab, Aref Afsharfard

01.05.2019 | Ausgabe 5/2019

Effect of clearances in rolling element bearings on their dynamic performance, quality and operating life

Mostafa Yakout, M. G. A. Nassef, Soheir Backar

01.05.2019 | Ausgabe 5/2019

A lumped parameter model for exponentially tapered piezoelectric beam in transverse vibration

Omid Fakharian, Hamed Salmani, Seyed Ali Hosseini Kordkheili

01.05.2019 | Ausgabe 5/2019

Deep forest based intelligent fault diagnosis of hydraulic turbine

Xiaolian Liu, Yu Tian, Xiaohui Lei, Mei Liu, Xin Wen, Haocheng Huang, Hao Wang

01.05.2019 | Ausgabe 5/2019

Quantitative validation of the analytical mode shapes of a beam-like structure with a Z-shaped configuration

Wenhua Hu, Fengxiang Wang, Dongxing Cao, Jianen Chen, Jingjing Feng

01.05.2019 | Ausgabe 5/2019

Experimental study of collapse mode and crashworthiness response of tempered and annealed aluminum tubes under axial compression

Majid Emadi, Hamid Beheshti, Mohammad Heidari-Rarani, Farhad Haji Aboutalebi

01.05.2019 | Ausgabe 5/2019

Mechanism and force-energy parameters of a hollow shaft’s multi-wedge synchrostep cross-wedge rolling

Shuhua Zheng, Xuedao Shu, Sutao Han, Penghui Yu

01.05.2019 | Ausgabe 5/2019

Enhancement of metal creep lifetime by graphene coating

Fahim Ahmed Ibupoto, Jang Gyun Lim, Dongmok Lee, Seunghyun Baik, Moon Ki Kim

01.05.2019 | Ausgabe 5/2019

Multiaxial fatigue reliability assessment using a differential ant-stigmergy algorithm

Yonghun Yu, Bora Lee, Yongjoo Cho

01.05.2019 | Ausgabe 5/2019

Experimental and computational study on flow over stepped spillway

Bhaskar Jyoti Medhi, Anugrah Singh, Ashish Kumar Thokchom, Sadhan Mahapatra

01.05.2019 | Ausgabe 5/2019

Ported shroud design of a compressor for the hydrogen reciprocating engine of a high-altitude unmanned aerial vehicle

Sangook Jun, Young Seok Kang, Byeung Jun Lim

01.05.2019 | Ausgabe 5/2019

Evaluation of the constituent correlations for predicting the refrigerant flow characteristics in adiabatic helically coiled capillary tubes

Won-Jong Lee, Ji Hwan Jeong

01.05.2019 | Ausgabe 5/2019

Numerical simulation of turbulent flow over a backward facing step using partially averaged Navier-Stokes method

Dahai Luo

01.05.2019 | Ausgabe 5/2019

Design and simulation of a magnetohydrodynamic micro-pump to provide time varying tensile force for vibration suppression in viscoelastic micro-beams

A. Alipour, M. H. Korayem, D. Younesian

01.05.2019 | Ausgabe 5/2019

Secondary flow mixing of neutralizing reagent induced by U-bent de-ballast pipes

Chanhee Moon, Hyun Dong Kim, Kyung Chun Kim

01.05.2019 | Ausgabe 5/2019

Prediction of separation induced transition on thick airfoil using non-linear URANS based turbulence model

Alok Mishra, Gaurav Kumar, Ashoke De

01.05.2019 | Ausgabe 5/2019

Evaluation of an extended viscoelastic model to predict hemolysis in cannulas and blood pumps

Seunghun Lee, Youngmoon Cho, Seongwon Kang, Nahmkeon Hur, Wonjung Kim

01.05.2019 | Ausgabe 5/2019

Large eddy simulation of the backdraft dynamics in compartments with different opening geometries

Dinesh Myilsamy, Chang Bo Oh, Byung-Il Choi

01.05.2019 | Ausgabe 5/2019

Image processing of additive alignment inside a polydimethylsiloxane and carbon fiber mixture flow

Jun Yub Park, Dong-Wook Oh

01.05.2019 | Ausgabe 5/2019

Optimal design of J-groove shape on the suppression of unsteady flow in the Francis turbine draft tube

Zhenmu Chen, Seok-Heum Baek, Hyunkyoo Cho, Young-Do Choi

01.05.2019 | Ausgabe 5/2019

Performance comparison of interpolation operators of multigrid methods based on distance weight and area (volume) intersection approaches Part I: Finite volume discretization

Sang Truong Ha, Han Young Yoon, Hyounggwon Choi

01.05.2019 | Ausgabe 5/2019

Mechanics of dynamic contact of coated substrate and rigid cylindrical ended punch

Mehmet N. Balci, Serkan Dag

01.05.2019 | Ausgabe 5/2019

Mechanical behavior of a cylindrical capacitive micro - switch compared to a straight beam type

Ashkan Attar, Mohammad Fathalilou, Ghader Rezazadeh

01.05.2019 | Ausgabe 5/2019

An enhanced prediction model for the on-line monitoring of the sensors using the Gaussian process regression

Sungyeop Lee, Jangbom Chai

01.05.2019 | Ausgabe 5/2019

Theoretical and numerical analysis of the mechanical responses of BCC and FCC lattice structures

Kyung-Won Lee, Se-Hwan Lee, Kyung-Ho Noh, Jin-Yong Park, Yong-Ju Cho, Sung-Hoon Kim

01.05.2019 | Ausgabe 5/2019

Free vibration analysis of bi-directional functionally graded annular plates using finite annular prism methods

Chih-Ping Wu, Lu-Ting Yu

01.05.2019 | Ausgabe 5/2019

Design and optimization of fixture structure with stiffeners for large-scale battery stacks

Wanju Lim, Seunghun Jung

01.05.2019 | Ausgabe 5/2019

Buckling analysis of thin-walled box beams under arbitrary loads with general boundary conditions using higher-order beam theory

Do-Min Kim, Soomin Choi, Gang-Won Jang, Yoon Young Kim

01.05.2019 | Ausgabe 5/2019

Pore-scale numerical study of flow and conduction heat transfer in fibrous porous media

Seyed Mostafa Hosseinalipour, Mohammadmehdi Namazi

01.05.2019 | Ausgabe 5/2019

Analysis of micro and nano particle erosion by analytical, numerical and experimental methods: A review

Suhas M. Shinde, Dayanand M. Kawadekar, Pradeep A. Patil, Virendra K. Bhojwani

01.05.2019 | Ausgabe 5/2019

Experimental investigation and finite element simulation of the effect of surface roughness on nanoscratch testing

Mohsen Nazemian, Mohammad Chamani

01.05.2019 | Ausgabe 5/2019

Effect of narrow infill density gap on the compressive properties of 3D printed carbon fibre reinforced acrylonitrile butadiene styrene

Abdul Manaf Abdullah, Dasmawati Mohamad, Tuan Noraihan Azila Tuan Rahim, Hazizan Md Akil, Zainul Ahmad Rajion

01.05.2019 | Ausgabe 5/2019

Investigation on the hard turning in enhancing the surface reliability by white layer elimination using cbn semi worn-out inserts under shielding gas atmosphere

S. Girisankar, M. Omkumar

01.05.2019 | Ausgabe 5/2019

Prevent weld line defects on an automotive crash pad by local heating and cooling with 3D printed insert core

Yong-Ha Cho, Jae-Hong Kim, Myeong-Geun Lee, Byung-Min Kim

01.05.2019 | Ausgabe 5/2019

Hole exit damage and tool wear during the drilling of CFRP with a double-point angle drill

Pengnan Li, Xinyi Qiu, Changping Li, Qiulin Niu, Anhua Chen, Tae Jo Ko

01.05.2019 | Ausgabe 5/2019

Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel

K. Mouralova, L. Benes, J. Bednar, R. Zahradnicek, T. Prokes, R. Matousek, P. Hrabec, Z. Fiserova, J. Otoupalik

01.05.2019 | Ausgabe 5/2019

Analysis of tool wear performance and surface quality in post milling of additive manufactured 316L stainless steel

Yadong Gong, Pengfei Li

01.05.2019 | Ausgabe 5/2019

Modelling and characteristic investigation of spindle-holder assembly under clamping and centrifugal forces

Shaoke Wan, Jun Hong, Fei Du, Bin Fang, Xiaohu Li

01.05.2019 | Ausgabe 5/2019

End milling of DIN 1.2714 die steel with cryogenic CO2 cooling

M. Jebaraj, M. Pradeep Kumar

01.05.2019 | Ausgabe 5/2019

Obstacle crossing and traction performance of active and passive screw pipeline robots

Qing Tu, Qingyou Liu, Tao Ren, Yujia Li

01.05.2019 | Ausgabe 5/2019

Effects of expansion pipe length on heat transfer enhancement of impinging jet array

Kirttayoth Yeranee, Makatar Wae-hayee, Ibroheng Piya, Yu Rao, Chayut Nuntadusit

01.05.2019 | Ausgabe 5/2019

Exergy analysis of a frost-free air source heat pump system

Zhihua Wang, Fenghao Wang, Xiuzhi Gao, Ke Li, Yechun Lou

01.05.2019 | Ausgabe 5/2019

Combustion characteristics of hydrogen-air mixture in pulse detonation engines

Noor Alam, K. K. Sharma, K. M. Pandey

01.05.2019 | Ausgabe 5/2019

Relationship between flame thickness and velocity based on thermodynamic three kernels in a constant volume combustion chamber

Kwonse Kim, Seokyeon Im, Munseok Choe, Taejun Yoon, Dogyeong Kang, Dooseuk Choi

01.05.2019 | Ausgabe 5/2019

Experimental study on drying time and energy consumption of a vented dryer

Seung Phyo Ahn, Seong Hwan Kim, Yong Gap Park, Man Yeong Ha

01.05.2019 | Ausgabe 5/2019

Numerical study on effect of corrugated diathermal partition on natural convection in a square porous cavity

Jayesh Subhash Chordiya, Ram Vinoy Sharma

01.05.2019 | Ausgabe 5/2019

Influence of biomass pretreatment on co-combustion characteristics with coal and biomass blends

Jong-Ho Kim, Tae-Yong Jeong, Jianglong Yu, Chung-Hwan Jeon

01.05.2019 | Ausgabe 5/2019

Effect of wrist-wearing distal radioulnar joint stabilizer on distal radioulnar joint instability using a forearm finite element model

Batbayar Khuyagbaatar, Sang-Jin Lee, Maro Cheon, Temuujin Batbayar, Danaa Ganbat, Yoon Hyuk Kim

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise