Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 9/2018

Ausgabe 9/2018

Inhaltsverzeichnis ( 50 Artikel )

01.09.2018 | Ausgabe 9/2018

A reduced time-varying model for a long beam on elastic foundation under moving loads

Guiming Mei, Caijin Yang, Shulin Liang, Jiangwen Wang, Dong Zou, Weihua Zhang, Yunshi Zhao, Zhong Huang, Shuqi Song, Mengying Tan, Yao Cheng, Bingrong Miao

01.09.2018 | Ausgabe 9/2018

Fault detection in roller bearing operating at low speed and varying loads using Bayesian robust new hidden Markov model

Henry Ogbemudia Omoregbee, P. Stephan Heyns

01.09.2018 | Ausgabe 9/2018

Dynamic analysis of indentation rolling resistance of steel cord rubber conveyor belt

Hong-yue Chen, Kun Zhang, Ming-bo Piao, Xin Wang, En-dong Li

01.09.2018 | Ausgabe 9/2018

Inertial parameter estimation for the dynamic simulation of a hydraulic excavator

Seungjin Yoo, Cheol-Gyu Park, Seung-Han You

01.09.2018 | Ausgabe 9/2018

Modeling dynamic behavior of MDOF systems with multiple bilinear springs

Yali Ma, Shudong Yu, Delun Wang

01.09.2018 | Ausgabe 9/2018

Life estimation of shafts using vibration based fatigue analysis

Sagi Rathna Prasad, A. S. Sekhar

01.09.2018 | Ausgabe 9/2018

Impeller fault detection under variable flow conditions based on three feature extraction methods and artificial neural networks

A. Jami, P. S. Heyns

01.09.2018 | Ausgabe 9/2018

Reliability analysis of a nonlinear rotor/stator contact system in the presence of aleatory and epistemic uncertainty

Lechang Yang, Ketai He, Yanling Guo

01.09.2018 | Ausgabe 9/2018

Dynamic behavior analysis of reciprocating compressor with subsidence fault considering flexible piston rod

Shungen Xiao, Hongli Zhang, Shulin Liu, Feng Jiang, Mengmeng Song

01.09.2018 | Ausgabe 9/2018

A novel negative dislocated seal and influential parameter analyses of static/rotordynamic characteristics

Dan Sun, Xudong Wang, Chengwei Fei, Shuang Wang, Yanting Ai

01.09.2018 | Ausgabe 9/2018

Vibration suppression of atomic-force microscopy cantilevers covered by a piezoelectric layer with tensile force

M. H. Korayem, A. Alipour, D. Younesian

01.09.2018 | Ausgabe 9/2018

Dynamic response with mass variation of laminated composite twisted plates

Anish, Kamal Kumar Gupta, Ajay Kumar, Danuta Barnat-Hunek, Wojciech Andrzejuk

01.09.2018 | Ausgabe 9/2018

Effects of macro-parameters on vibration and radiation noise for high speed wheel gear transmission in electric vehicles

Xi Chen, Chaosheng Song, Caichao Zhu, Jianjun Tan, Najeeb Ullah

01.09.2018 | Ausgabe 9/2018

Improvement of long-term creep life extrapolation using a new master curve for Grade 91 steel

Woo-Gon Kim, Jae-Young Park, Seon-Jin Kim, Eung-Seon Kim, Jinsung Jang

01.09.2018 | Ausgabe 9/2018

Wear resistance characteristics of materials used in oil sands plants

Sung Jae Won, Rendi Kurniawan, Dae Kyung Kang, Joong Sik Heo

01.09.2018 | Ausgabe 9/2018

Numerical and experimental method for the prediction of the propagation life of fatigue crack on metallic materials

Chen Ni, Lin Hua, Xiaokai Wang, Zhou Wang, Zhikui Ma

01.09.2018 | Ausgabe 9/2018

Internal defect detection using laser-generated longitudinal waves in ablation regime

Sungho Choi, Kyung-Young Jhang

01.09.2018 | Ausgabe 9/2018

Determination of creep constitutive model for 28-48WCo alloy based on experimental creep tests at 817–982 °C

Van Hung Dao, Kee Bong Yoon, Gimo Yang, Jae Sung Oh

01.09.2018 | Ausgabe 9/2018

A numerical study on the transient impulsive pressure of a water jet impacting nonplanar solid surfaces

Fei Huang, Shuqing Li, Yanlin Zhao, Yong Liu

01.09.2018 | Ausgabe 9/2018

Experimental investigation of the preferred Strouhal number used in self-resonating pulsed waterjet

Deng Li, Youping Chen, Yong Kang, Zu’An Wang, Xiaoliang Wang, Qi Fan, Miao Yuan

01.09.2018 | Ausgabe 9/2018

Numerical study for the design optimization of a two-phase ejector with R134a refrigerant

Sunghoon Baek, Simon Song

01.09.2018 | Ausgabe 9/2018

Development of MEMS-based thermal mass flow sensors for high sensitivity and wide flow rate range

Woong Kang, Hae-Man Choi, Yong-Moon Choi

01.09.2018 | Ausgabe 9/2018

Validating an emerging tool based on auditory scale for decoding users’ emotional desires

Weihua Lu, Jean-François Petiot, Kun-pyo Lee, Haihua Zhu

01.09.2018 | Ausgabe 9/2018

A novel worst case approach for robust optimization of large scale structures

Se-Jung Lee, Min-Ho Jeong, Gyung-Jin Park

01.09.2018 | Ausgabe 9/2018

Evaluation of the axial crashworthiness of thin-walled structures with various and combined cross sections

Mohammadmahdi Davoudi, Cheol Kim

01.09.2018 | Ausgabe 9/2018

Experimental investigation on a hybrid manufacturing process of micro-scale mold for biomimetic intestinal villi’s scaffold

Pil-Ho Lee, Jung Sub Kim, Sang Won Lee, Chenhui Shao, Haseung Chung

01.09.2018 | Ausgabe 9/2018

Application of electromagnetic forming in terminal crimping using different types of field shapers

Ashish K. Rajak, Sachin D. Kore

01.09.2018 | Ausgabe 9/2018

Modeling of dynamic recrystallization in white layer in dry hard cutting by finite element—cellular automaton method

Chunzheng Duan, Fangyuan Zhang, Siwei Qin, Wei Sun, Minjie Wang

01.09.2018 | Ausgabe 9/2018

Design and analysis of a novel double-servo direct drive rotary valve with high frequency

Muzhi Zhu, Shengdun Zhao, Peng Dong, Jingxiang Li

01.09.2018 | Ausgabe 9/2018

Influence of heterogeneous mechanical properties on the performance of forward static bending test of rail welded joint

Pingpo Fu, Zhiming Zhu

01.09.2018 | Ausgabe 9/2018

Effects of welding current and torch position parameters on bead geometry in cold metal transfer welding

Huijun Lee, Changwook Ji, Jiyoung Yu

01.09.2018 | Ausgabe 9/2018

Effect of welding residual stress redistribution on the Charpy absorbed energy

Zhaorui Yang, Sangyul Ha, Bum-Suk Jang, Yongseog Lee

01.09.2018 | Ausgabe 9/2018

Simultaneous machining and surface alloying of AISI 1040 steel by electrical discharge machining with boron oxide powders

Hacı Bekir Özerkan

01.09.2018 | Ausgabe 9/2018

Performance evaluation of micro-dimple formation on a Ti-6Al-4V alloy by using electrical discharge drilling

Sang Tae Jung, S. Thirumalai Kumaran, Chang Ping Li, Rendi Kurniawan, Tae Jo Ko

01.09.2018 | Ausgabe 9/2018

Explicit controller of a single truck stability and rollover mitigation

Fitri Yakub, Pauziah Muhammad, Hoong Thiam Toh, M. Sofian Abu Talip, Yasuchika Mori

01.09.2018 | Ausgabe 9/2018

A novel methodology of calculating the human-machine interactive force for a head-neck exoskeleton

Peng Li, Dongsu Wu, Shu Xu, Yuansheng Cui

01.09.2018 | Ausgabe 9/2018

Novel mingled reformed recurrent hermite polynomial neural network control system applied in continuously variable transmission system

Jung-Chu Ting, Der-Fa Chen

01.09.2018 | Ausgabe 9/2018

Unsupervised identification of arbitrarily-damped structures using time-scale independent component analysis: Part II

Alireza Farzampour, Arash Kamali-Asl, Jong Wan Hu

01.09.2018 | Ausgabe 9/2018

Electromechanical modeling of a novel moving magnet linear oscillating actuator

Adnan Hassan, Armin Bijanzad, Ismail Lazoglu

01.09.2018 | Ausgabe 9/2018

Parametric vibration source characterization of a reaction-wheel-assembly by evaluation on predictions of blocked forces and simple receiver responses

Gyunchul Hur, Kwang-joon Kim

01.09.2018 | Ausgabe 9/2018

Elastodynamic-model-based stiffness analysis of a 6-RSS PKM

Jiangping Mei, Yanqin Zhao

01.09.2018 | Ausgabe 9/2018

Effect of rotation number on flow and heat transfer characteristics in serpentine passage with ribbed walls

Natthaporn Kaewchoothong, Kittinan Maliwan, Kenichiro Takeishi, Chayut Nuntadusit

01.09.2018 | Ausgabe 9/2018

Effects of regenerator structure on performance of free piston stirling engine (FPSE)

Byung Gyun Kim, Won-Shik Park, Bon-Gil Koo, Suhan Park

01.09.2018 | Ausgabe 9/2018

Effect of nozzle rotation angles and sizes on thermal characteristic of swirl anti-icing

Mohd Azmi Ismail, Jian Wang

01.09.2018 | Ausgabe 9/2018

Prediction of optimum design variables for maximum heat transfer through a rectangular porous fin using particle swarm optimization

Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, Saheera Azmi Hazarika

01.09.2018 | Ausgabe 9/2018

Effects of different working fluids on the performance of a radial turbine in an organic Rankine cycle power system

Ze-min Bo, Zhenkun Sang, Xiaojing Lv, Yi-wu Weng

01.09.2018 | Ausgabe 9/2018

Detailed in-furnace measurements in a pulverized coal-fired furnace with combined woody biomass co-firing and air staging

Minsung Choi, Xinzhuo Li, Kibeom Kim, Yonmo Sung, Gyungmin Choi

01.09.2018 | Ausgabe 9/2018

A study on the particle temperature in a conical fluidized bed using infrared thermography

Hamada Mohamed Abdelmotalib, Ik-Tae Im

01.09.2018 | Ausgabe 9/2018

Tube-side heat transfer and friction characteristics of titanium corrugated tubes used for steam condensers

Nae-Hyun Kim, Min-Geon Go

01.09.2018 | Ausgabe 9/2018

3D numerical model of blood flow in the coronary artery bypass graft during no pulse and pulse situations: Effects of an anastomotic angle and characteristics of fluid

Satiraporn Koksungnoen, Phadungsak Rattanadecho, Patcharaporn Wongchadakul

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise