Ausgabe 1/2007
Inhalt (21 Artikel)
Kinetics of Nitriding Fe-2 Wt Pct V Alloy: Mobile and Immobile Excess Nitrogen
S. S. Hosmani, R. E. Schacherl, E. J. Mittemeijer
Transformation Superplasticity of Cast Titanium and Ti-6Al-4V
Qizhen Li, Edward Y. Chen, Douglas R. Bice, David C. Dunand
Studies on Hot Corrosion of the 2.25 Cr-1Mo Boiler Tube Steel and Its Weldments in the Molten Salt Na2SO4-60 pct V2O5 Environment
Ravindra Kumar, V.K. Tewari, S. Prakash
Characterization of Microstructures across the Heat-Affected Zone of the Modified 9Cr-1Mo Weld Joint to Understand Its Role in Promoting Type IV Cracking
K. LAHA, K.S. CHANDRAVATHI, P. PARAMESWARAN, K. BHANU SANKARA RAO, S.L. MANNAN
Influence of the Tool Pin and Shoulder on Microstructure and Natural Aging Kinetics in a Friction-Stir-Processed 6061–T6 Aluminum Alloy
Wanchuck Woo, Hahn Choo, Donald W. Brown, Zhili FENG
Study of Molten Salt Corrosion of High Velocity Oxy-Fuel Sprayed Cermet and Nickel-Based Coatings at 900 °C
T. S. Sidhu, S. Prakash, R. D. Agrawal
Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels
T.D. ANDERSON, J.N. DuPONT, M.J. PERRICONE, A.R. MARDER
Tip Velocities and Radii of Curvature of Pivalic Acid Dendrites under Convection-Free Conditions
J.C. LACOMBE, M.B. KOSS, M.E. GLICKSMAN
Solidification Behavior and the Evolution of Phase in Laser Rapid Forming of Graded Ti6Al4V-Rene88DT Alloy
X. Lin, T.M. Yue, H.O. Yang, W.D. Huang
Microsegregation during Solidification of Graphitic Fiber-Reinforced Aluminum Alloys under External Heat Sinks
H.G. Seong, H.F. Lopez, P.K. Rohatgi
Equilibrium Distribution of Liquid during Sintering of Assemblies of WC/Co Cermets
Christophe Colin, Vincent Guipont, Francis Delannay
Starch Consolidation as a New Process for Manufacturing Powder Metallurgy High-Speed Steels
P. Romano, F.J. Velasco, J.M. Torralba
Numerical Simulation of the Fracture Behavior of Ti/SiC Composites between 20 °C and 400 °C
Carlos González, Javier LLorca
Modeling Macrosegregation during Direct-Chill Casting of Multicomponent Aluminum Alloys
Q. Du, D.G. Eskin, L. Katgerman
Variation of Lap Shear Tensile Strength of Polycarbonate–Mild Steel Adhesive Joints with DC Glow Discharge Modified Polycarbonate
Amrish K. Panwar, S. K. Barthwal, S. Ray