Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 12/2006

Ausgabe 12/2006

Inhaltsverzeichnis ( 40 Artikel )

01.12.2006 | Ausgabe 12/2006

Fourth International Alloy Conference Foreword

A. Gonis, P. E. A. Turchi, A. Meike, K. Rajan

01.12.2006 | Ausgabe 12/2006

Stability of hume-rothery phases in Cu−Zn alloys at pressures up to 50 GPa

V. F. Degtyareva, M. K. Sakharov, N. I. Novokhatskaya, O. Degtyareva, P. Dera, H. K. Mao, R. J. Hemley

01.12.2006 | Ausgabe 12/2006

Atomic displacements in alloys

Yevgeniy Puzyrev, J. S. Faulkner

01.12.2006 | Ausgabe 12/2006

Electronic origin of elastic properties of titanium carbonitride alloys

V. I. Ivashchenko, P. E. A. Turchi, A. Gonis, L. A. Ivashchenko, P. L. Skrynskii

01.12.2006 | Ausgabe 12/2006

Ab Initio calculations of phase stabilities in the Fe−Al−C system and CALPHAD-Type assessment of the iron-rich corner

P. Maugis, J. Lacaze, R. Besson, J. Morillo

01.12.2006 | Ausgabe 12/2006

Thermodynamic properties and phase diagram by the statistical moment and cluster variation methods: Application to pure metals and Ta-W alloys

K. Masuda-Jindo, Vu Van Hung, P. E. A. Turchi

01.12.2006 | Ausgabe 12/2006

Extracting information from the molten salt database

Slobodan Gadzuric, Changwon Suh, Marcelle Gaune-Escard, Krishna Rajan

01.12.2006 | Ausgabe 12/2006

Atomic ordering and magnetism in L10 ordered FePd alloys

Chaisak Issro, Madjid Abes, Wolfgang Püschl, Bogdan Sepiol, Wolfgang Pfeiler, Peter F. Rogl, Guy Schmerber, William A. Soffa, Rafal Kozubski, Véronique Pierron-Bohnes

01.12.2006 | Ausgabe 12/2006

Magnetic alloys in nanoscale biomaterials

T. Leventouri, A. V. Melechko, K. D. Sorge, K. L. Klein, J. D. Fowlkes, P. D. Rack, I. M. Anderson, J. R. Thompson, T. E. McKnight, M. L. Simpson

01.12.2006 | Ausgabe 12/2006

On the advantages of using powder metallurgy in new light metal alloy design

G. J. Kipouros, W. F. Caley, D. P. Bishop

01.12.2006 | Ausgabe 12/2006

A comparative study of fatigue properties of two face-centered-cubic metals

A. O. Mohamed, Y. El-Madhoun, M. N. Bassim

01.12.2006 | Ausgabe 12/2006

Dislocation boundary width changes due to cyclic hardening

A. O. Mohamed, Y. El-Madhoun, M. N. Bassim

01.12.2006 | Ausgabe 12/2006

Time-temperature-precipitation characteristics of high-nitrogen austenitic Fe−18Cr−18Mn−2Mo−0.9N steel

Tae-Ho Lee, Sung-Joon Kim, Setsuo Takaki

01.12.2006 | Ausgabe 12/2006

Differential role of nanoscaled oxide dispersoids (Y2O3 vs Al2O3) in the high-temperature structural stability of NiCr alloys

Dheepa Srinivasan, P. R. Subramanian

01.12.2006 | Ausgabe 12/2006

Texture evolution during strain-induced martensitic phase transformation in 304L stainless steel at a cryogenic temperature

Kaixiang Tao, Donald W. Brown, Sven C. Vogel, Hahn Choo

01.12.2006 | Ausgabe 12/2006

Effect of specimen geometry, gage length, and width measurement locations on plastic strain ratio (R-value) in sheet metals

A. Chamanfar, R. Mahmudi

01.12.2006 | Ausgabe 12/2006

Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material

Xinjian Duan, Mukesh Jain, David S. Wilkinson

01.12.2006 | Ausgabe 12/2006

Robustness of the sheet metal springback cup test

T. Foecke, T. Gnaeupel-Herold

01.12.2006 | Ausgabe 12/2006

Structural superplasticity in a fine-grained eutectic intermetallic NiAl−Cr alloy

G. Frommeyer, W. Kowalski, R. Rablbauer

01.12.2006 | Ausgabe 12/2006

Cyclic deformation of superduplex stainless steels at intermediate temperatures

A. Gironès, L. Llanes, M. Anglada, A. Mateo

01.12.2006 | Ausgabe 12/2006

Strain and the quantitative characterization of anisotropic microstructures

Craig S. Hartley

01.12.2006 | Ausgabe 12/2006

Effect of prestrain on the ductile fracture behavior of an interstitial-free steel

Shrabani Majumdar, K. K. Ray

01.12.2006 | Ausgabe 12/2006

Interpretation of the creep behavior of nanocrystalline Ni in terms of dislocation accommodated boundary sliding

Farghalli A. Mohamed, Manish Chauhan

01.12.2006 | Ausgabe 12/2006

Cryogenic and elevated temperature strengths of an Al−Zn−Mg−Cu alloy modified with Sc and Zr

S. V. Senkova, O. N. Senkov, D. B. Miracle

01.12.2006 | Ausgabe 12/2006

Improved homogenization of Ni in sintered steels through the use of Cr-containing prealloyed powders

M. W. Wu, K. S. Hwang

01.12.2006 | Ausgabe 12/2006

Thermal shock behavior of a three-dimensional SiC/SiC composite

Shoujun Wu, Laifei Cheng, Litong Zhang, Yongdong Xu

01.12.2006 | Ausgabe 12/2006

Precipitation and grain refinement in a 2195 Al friction stir weld

R. W. Fonda, J. F. Bingert

01.12.2006 | Ausgabe 12/2006

The effect of friction stir processing on 5083-H321/5356 Al arc welds: Microstructural and mechanical analysis

Christian B. Fuller, Murray W. Mahoney

01.12.2006 | Ausgabe 12/2006

Palmqvist fracture toughness of a new wear-resistant weld alloy

B. E. Meacham, M. C. Marshall, D. J. Branagan

01.12.2006 | Ausgabe 12/2006

Synchrotron X-ray measurement and finite element analysis of residual strain in tungsten inert gas welded aluminum alloy 2024

R. V. Preston, H. R. Shercliff, P. J. Withers, D. J. Hughes, S. D. Smith, P. J. Webster

01.12.2006 | Ausgabe 12/2006

Development of laser-cladding layers containing nano-Al2O3 particles for wear-resistance materials

Sirong Yu, Yan Liu, Luquan Ren, Wen Li

01.12.2006 | Ausgabe 12/2006

Hot tearing of ternary Mg−Al−Ca alloy castings

G. Cao, S. Kou

01.12.2006 | Ausgabe 12/2006

Study of the formation and intergrowth of granular eutectic in austenitic steel matrix composite by directional solidification technology

Zhenming Xu, Gaofei Liang

01.12.2006 | Ausgabe 12/2006

The drag force on a particle approaching a solidifying interface

Layachi Hadji

01.12.2006 | Ausgabe 12/2006

Deformation and fracture behavior of 316L sintered stainless steel under various strain rate and relative sintered density conditions

Woei-Shyan Lee, Chien-Cheng Chiu

01.12.2006 | Ausgabe 12/2006

The effect of strain-path reversal on cavitation during hot torsion of Ti-6Al-4V

P. D. Nicolaou, S. L. Semiatin

01.12.2006 | Ausgabe 12/2006

Determination of spatial grain size with the area-weighted grain area distribution of the planar sections in polycrystalline materials

Fuxing Yin, Atsuko Sakurai, Xiaoyan Song

01.12.2006 | Ausgabe 12/2006

The effect of the electromagnetic vabration on the microstructure, segregation, and mechanical properties of As-cast AZ80 magnesium alloy billet

Shijie Guo, Qichi Le, Yi Han, Zhihao Zhao, Jianzhong Cui

01.12.2006 | Ausgabe 12/2006

Microstructure and properties of blended Mg−Al alloys fabricated by semisolid processing

T. K. Nandy, Rebecca M. Messing, J. Wayne Jones, Tresa M. Pollock, D. M. Walukas, R. F. Decker

01.12.2006 | Communications | Ausgabe 12/2006

Role of aluminum in hot-rolled ultra-low-carbon Nb-interstitial-free steels

W. C. Jeong

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise