Ausgabe 3/2002
Inhalt (60 Artikel)
Aging behavior of the Ti-29Nb-13Ta-4.6Zr new beta alloy for medical implants
Masahiko Ikeda, Shin-Ya Komatsu, Isao Sowa, Mitsuo Niinomi
Hydrogen embrittlement of nickel-titanium alloy in biological environment
K. Asaoka, K. Yokoyama, M. Nagumo
Improvement in mechanical properties of dental cast Ti-6Al-7Nb by thermochemical processing
Toshikazu Akahori, Mitsuo Niinomi, Akihiro Suzuki
Dry-process surface modification for titanium dental implants
Masao Yoshinari, Yutaka Oda, Takashi Inoue, Masaki Shimono
Variation in crystallinity of hydroxyapatite and the related calcium phosphates by mechanical grinding and subsequent heat treatment
Takayoshi Nakano, Yukichi Umakoshi, Atsuyuki Tokumura
Modeling the kinetics of grain-boundary-nucleated recrystallization processes after cold deformation
S. P. Chen, S. Van Der Zwaag, I. Todd
Microstructural and mechanical properties investigation of electrodeposited and annealed LIGA nickel structures
Thomas E. Buchheit, Joseph R. Michael, Todd R. Christenson, David A. LaVan, Steven D. Leith
Effect of loading condition and stress state on damage evolution of silicon particles in an Al-Si-Mg-Base cast alloy
M. D. Dighe, A. M. Gokhale, M. F. Horstemeyer
Creep and microstructure of magnesium-aluminum-calcium based alloys
Alan A. Luo, Bob R. Powell, Michael P. Balogh
Unexpected transient creep behavior of tin alloys strengthened by high volume fractions of SbSn
Rodney J. McCabe, Morris E. Fine
Cracking in γ-TiAl due to high speed particle impact
V. T. McKenna, M. P. Rubal, P. S. Steif, J. M. Pereira, G. T. Gray III
Three-dimensional investigation of long-range internal stresses in a single crystal deforming by nonsymmetrical slip
G. Monnet, B. Bacroix, J. -L. Lebrun, T. Ungar
Sliding wear of austenitic and austenitic-ferritic stainless steels
G. Straffelini, A. Molinari, D. Trabucco
Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063
Yutaka S. Sato, Mitsunori Urata, Hiroyuki Kokawa
A novel technique for manufacturing metal-bonded Nd-Fe-B magnets by squeeze casting
Jun-Fa Ji, Chuenguang Chao
Synthesis and nanoindentation study of high-velocity oxygen fuel thermal-sprayed nanocrystalline and near-nanocrystalline Ni coatings
L. Ajdelsztajn, K. Chung, E. J. Lavernia, J. Lee, F. L. Bastian
Structural evolution of a strip-cast al alloy sheet processed by continuous equal-channel angular pressing
Jae-Chul Lee, Young-Hoon Chung, Hyun-Kwang Seok, Jin-Yoo Suh, Jun-Hyun Han
Stable quasicrystalline phase in Al-Cu-Fe-Cr coating materials
X. Z. Li, L. D. Marks, J. Maciejewski, L. Fehrenbacher, J. Zabinski, J. O’Neill
Fabrication and characterization of Ti-TiB2 functionally graded material system
J. Ma, Zeming He, G. E. B. Tan
Direct measurements of grain size in low-carbon steels using the laser ultrasonic technique
S. Sundin, D. Artymowicz
Electron backscatter diffraction analysis of microstructural evolution in hot-deformed 6xxx series aluminum alloys
William H. van Geertruyden, Steven R. Claves, Wojciech Z. Misiolek
Effect of boron on the hot ductility of Nb-containing steel
Sung K. Kim, Nack J. Kim, June Sung Kim
Microstructural interpretation of negligible strain-hardening behavior of submicrometer-grained low-carbon steel during tensile deformation
Kyung-Tae Park, Dong Hyuk Shin
Examination on the aging and tensile properties of Al-Zn-Mg/Al3Ni eutectic composite
S. H. Wang, J. Y. Uan, T. S. Lui, L. H. Chen
The effects of deformation and pre-heat-treatment on abnormal grain growth in RENÉ 88 superalloy
Young Kyu Cho, Duk Yong Yoon, Michael F. Henry
Symposium on defect properties and mechanical behavior of hcp metals and alloys Foreword
Man H. Yoo, James R. Morris, Carlos N. Tomé
First-principles investigation of perfect and diffuse antiphase boundaries in HCP-based Ti-Al alloys
A. van de Walle, M. Asta
Effect of pressure on zone-center phonons in hexagonal-close-packed metals
H. Olijnyk, A. P. Jephcoat
A study of twinning in zirconium using neutron diffraction and polycrystalline modeling
Partha Rangaswamy, Mark A. M. Bourke, Donald W. Brown, George C. Kaschner, Michael G. Stout, Carlos N. Tome, Ronald B. Rogge
Bulk and interface boundary diffusion in group IV hexagonal close-packed metals and alloys
C. Herzig, S. Divinski, Y. Mishin
Grain-boundary diffusion by vacancy mechanism in α-Ti and α-Zr
J. R. Fernández, A. M. Monti, R. C. Pasianot, R. C. Pasianot
Diffusion along grain and interphase boundaries in alpha Zr and Zr-2.5 wt pct Nb alloy
Manuel J. Iribarren, Marina M. Iglesias, Fanny Dyment
Nonbasal deformation modes of HCP metals and alloys: Role of dislocation source and mobility
M. H. Yoo, J. R. Morris, K. M. Ho, S. R. Agnew
Molecular dynamics simulation of 〈c+a〉 dislocation core structure in hexagonal-close-packed metals
Shinji Ando, Hideki Tonda, Takushi Gotoh
Transmission electron microscopy investigation of 〈c+a〉 dislocations in Mg and α-solid solution Mg-Li alloys
S. R. Agnew, J. A. Horton, M. H. Yoo
Determination of dislocation densities in HCP metals from X-ray diffraction line-broadening analysis
M. Griffiths, D. Sage, R. A. Holt, C. N. Tome
Creep processes in magnesium alloys and their composites
V. Sklenička, M. Pahutová, K. Kuchařová, M. Svoboda, T. G. Langdon
Observations of room-temperature creep recovery in titanium alloys
M. F. Savage, T. Neeraj, M. J. Mills
Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal vs. lamellar structures
R. K. Nalla, R. O. Ritchie, B. L. Boyce, J. P. Campbell, J. O. Peters
Anisotropic threshold stress intensity factor, KIH and crack growth rate in delayed hydride cracking of Zr-2.5Nb pressure tubes
Young Suk Kim, Sung Soo Kim, Sang Chul Kwon, Yong Moo Cheong, Kyung Soo Im
Computational modeling of through-thickness dynamic impact response in cross-rolled Ti-6Al-4V plates
Bimal K. Kad, Scott E. Schoenfeld, Matthew S. Burkins
Advances in deformation twin characterization using electron backscattered diffraction data
T. A. Mason, J. F. Bingert, G. C. Kaschner, S. I. Wright, R. J. Larsen
Deformation twinning in polycrystalline Zr: Insights from electron backscattered diffraction characterization
J. R. Bingert, T. A. Mason, G. C. Kaschner, G. T. Gray III, P. J. Maudlin
Equal-channel angular extrusion of beryllium
R. D. Field, C. T. Necker, K. T. Hartwig, J. F. Bingert, S. R. Agnew
Microstructure evolution in Zr under equal channel angular pressing
W. S. Choi, H. S. Ryoo, S. K. Hwang, M. H. Kim, S. I. Kwun, S. W. Chae