Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 4/2013

Ausgabe 4/2013

Inhaltsverzeichnis ( 38 Artikel )

01.04.2013 | Communication | Ausgabe 4/2013

Interdiffusion and Atomic Mobility for Face-Centered Cubic (FCC) Co-W Alloys

Y.-W. Cui, Guanglong Xu, R. Kato, Xiao-Gang Lu, R. Kainuma, K. Ishida

01.04.2013 | Communication | Ausgabe 4/2013

Deformation and Damage Mechanisms in Ultrafine-Grained Austenitic Stainless Steel During Cyclic Straining

Atef S. Hamada

01.04.2013 | Communication | Ausgabe 4/2013

Effect of Cyclic Predeformation on the Uniaxial Tensile Deformation Behavior of [017] Cu Single Crystals Oriented for Critical Double Slip

X. W. Li, X. M. Wang, W. W. Guo, C. J. Qi, Y. Yan

01.04.2013 | Communication | Ausgabe 4/2013

Solid/Liquid Interfacial Energy of Mg-Al Alloys

Manas Paliwal, In-Ho Jung

01.04.2013 | Communication | Ausgabe 4/2013

Microstructural Evolution with a Wide Range of Solidification Cooling Rates in a Ni-Based Superalloy

Yongjun Zhang, Bin Huang, Jianguo Li

01.04.2013 | Communication | Ausgabe 4/2013

Investigation of New Routes for the Synthesis of Mn4Si7

Ali Allam, Pascal Boulet, Carlos A. Nunes, Marie-Christine Record

01.04.2013 | Communication | Ausgabe 4/2013

A Quantified Complex Strengthening Mechanism in Solid-State Recycled Titanium

Peng Luo, Qiaodan Hu

01.04.2013 | Ausgabe 4/2013

Directional Solidification and Liquidus Projection of the Sn-Co-Cu System

Sinn-Wen Chen, Jui-Shen Chang, Kevin Pan, Chia-Ming Hsu, Che-Wei Hsu

01.04.2013 | Ausgabe 4/2013

Microstructure Aspects of a Newly Developed, Low Cost, Corrosion-Resistant White Cast Iron

P. K. Sain, C. P. Sharma, A. K. Bhargava

01.04.2013 | Ausgabe 4/2013

Evaluation of Interface Boundaries in 9Cr-1Mo Steel After Thermal and Thermomechanical Treatments

T. Karthikeyan, Manmath Kumar Dash, S. Saroja, M. Vijayalakshmi

01.04.2013 | Ausgabe 4/2013

Effect of Boron on the Isothermal Bainite Transformation

Taejin Song, Bruno Charles De Cooman

01.04.2013 | Ausgabe 4/2013

The Influence of Precipitation of Alpha2 on Properties and Microstructure in TIMETAL 6-4

Zhiwei Wu, Chunlei Qiu, V. Venkatesh, Hamish L. Fraser, R. E. A. Williams, G. B. Viswanathan, Matthew Thomas, S. Nag, Rajarshi Banerjee, Michael H. Loretto

01.04.2013 | Ausgabe 4/2013

Bilinear Coffin–Manson Relationship in Thin Sheets of Interstitial-Free Steel

Shrabani Majumdar, Debashish Bhattacharjee, Kalyan Kumar Ray, Ranjit Kumar Ray

01.04.2013 | Ausgabe 4/2013

Understanding the Shape-Memory Behavior in Ti-(~49 At. Pct) Ni Alloy by Nanoindentation Measurement

A. Sinha, S. Datta, P. C. Chakraborti, P. P. Chattopadhyay

01.04.2013 | Ausgabe 4/2013 Open Access

A Coupled Thermal/Material Flow Model of Friction Stir Welding Applied to Sc-Modified Aluminum Alloys

Carter Hamilton, Mateusz Kopyściański, Oleg Senkov, Stanislaw Dymek

01.04.2013 | Ausgabe 4/2013

An Atom-Probe Tomographic Study of Arc Welds in a Multi-Component High-Strength Low-Alloy Steel

Allen H. Hunter, Jeffrey D. Farren, John N. DuPont, David N. Seidman

01.04.2013 | Ausgabe 4/2013

Effect of Microstructure on Diffusional Solidification of 4343/3005/4343 Multi-Layer Aluminum Brazing Sheet

Yiyou Tu, Zhen Tong, Jianqing Jiang

01.04.2013 | Ausgabe 4/2013

Microstructure and Corrosion Properties of AlCoCrFeNi High Entropy Alloy Coatings Deposited on AISI 1045 Steel by the Electrospark Process

Q. H. Li, T. M. Yue, Z. N. Guo, X. Lin

01.04.2013 | Ausgabe 4/2013

Formation of Intermetallic Ni-Al Coatings by Mechanical Alloying with Different Intensities

V. Yu. Zadorozhnyy, S. D. Kaloshkin, M. N. Churyukanova, Yu. V. Borisova

01.04.2013 | Ausgabe 4/2013

Effect of Cold Rolling Reduction Rate on Secondary Recrystallized Texture in 3 Pct Si-Fe Steel

Takeshi Imamura, Yukihiro Shingaki, Yasuyuki Hayakawa

01.04.2013 | Ausgabe 4/2013

Wide Gap TLP Bonding a Single-Crystal Superalloy: Evolution of the L/S Interface Morphology and Formation of the Isolated Grain Boundaries

N. C. Sheng, J. D. Liu, T. Jin, X. F. Sun, Z. Q. Hu

01.04.2013 | Ausgabe 4/2013

Room-Temperature Mechanochemical Synthesis of W2B5 Powders

Selim Coşkun, M. Lütfi Öveçoğlu

01.04.2013 | Ausgabe 4/2013

Extrusion, Properties, and Failure of Spray-Formed Hypereutectic Al-Si Alloys Based on the Optimization of Fe-Bearing Phase

L. G. Hou, H. Yu, H. Cui, Y. H. Cai, L. Z. Zhuang, J. S. Zhang

01.04.2013 | Ausgabe 4/2013

High-Temperature Compression Behavior of Cast and Homogenized IN939 Superalloy

M. R. Jahangiri, H. Arabi, S. M. A. Boutorabi

01.04.2013 | Ausgabe 4/2013

Microwave Heating, Isothermal Sintering, and Mechanical Properties of Powder Metallurgy Titanium and Titanium Alloys

S. D. Luo, C. L. Guan, Y. F. Yang, G. B. Schaffer, M. Qian

01.04.2013 | Ausgabe 4/2013

Enhanced Mechanical Properties of a Hot-Stamped Advanced High-Strength Steel via Tempering Treatment

M. Naderi, M. Abbasi, A. Saeed-Akbari

01.04.2013 | Ausgabe 4/2013

A Novel Approach to Model Static Recrystallization of Austenite During Hot Rolling of Nb Microalloyed Steel. Part I: Precipitate-Free Case

Md. Kashif Rehman, Hatem S. Zurob

01.04.2013 | Ausgabe 4/2013

β-Ti Alloys with Low Young’s Moduli Interpreted by Cluster-Plus-Glue-Atom Model

Qing Wang, Chunjun Ji, Yingmin Wang, Jianbing Qiang, Chuang Dong

01.04.2013 | Ausgabe 4/2013

Deformation Behavior Estimation of Aluminum Foam by X-ray CT Image-based Finite Element Analysis

Yoshihiko Hangai, Ryo Yamaguchi, Shunya Takahashi, Takao Utsunomiya, Osamu Kuwazuru, Nobuhiro Yoshikawa

01.04.2013 | Ausgabe 4/2013

Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study

Rocío Muñoz-Moreno, M. Teresa Pérez-Prado, Javier Llorca, Elisa María Ruiz-Navas, Carl J. Boehlert

01.04.2013 | Ausgabe 4/2013

Nanoparticle-Induced Superior Hot Tearing Resistance of A206 Alloy

Hongseok Choi, Woo-hyun Cho, Hiromi Konishi, Sindo Kou, Xiaochun Li

01.04.2013 | Ausgabe 4/2013

Spark Plasma Sintering of Nanostructured Aluminum: Influence of Tooling Material on Microstructure

Dongming Liu, Yuhong Xiong, Ying Li, Troy D. Topping, Yizhang Zhou, Chris Haines, Joseph Paras, Darold Martin, Deepak Kapoor, Julie M. Schoenung, Enrique J. Lavernia

01.04.2013 | Ausgabe 4/2013

Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures

Chandra Sekhar Tiwary, Akash Verma, Sanjay Kashyp, Krishanu Biswas, Kamanio Chattopadhyay

01.04.2013 | Ausgabe 4/2013

Phase-Field Modeling of Eutectic Growth in a Ti-Fe System with Multiple Nuclei and Misorientations

Zohreh Ebrahimi, Joao Luiz Lopez Rezende, H. Emmerich

01.04.2013 | Ausgabe 4/2013

Thermochemical Analysis of Phases Formed at the Interface of a Mg alloy-Ni-plated Steel Joint during Laser Brazing

Ali M. Nasiri, Patrice Chartrand, David C. Weckman, Norman Y. Zhou

01.04.2013 | Ausgabe 4/2013

Progress in Indium Gallium Nitride Materials for Solar Photovoltaic Energy Conversion

Dirk V. P. McLaughlin, Joshua M. Pearce

01.04.2013 | Ausgabe 4/2013

Effect of Platform Dimension on the Dendrite Growth and Stray Grain Formation in a Ni-Base Single-Crystal Superalloy

X. B. Meng, J. G. Li, Z. Q. Chen, Y. H. Wang, S. Z. Zhu, X. F. Bai, F. Wang, J. Zhang, T. Jin, X. F. Sun, Z. Q. Hu

01.04.2013 | Ausgabe 4/2013

In situ Evidence of Defect Cluster Absorption by Grain Boundaries in Kr Ion Irradiated Nanocrystalline Ni

C. Sun, M. Song, K. Y. Yu, Y. Chen, M. Kirk, M. Li, H. Wang, X. Zhang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise