Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 4/2014

Ausgabe 4/2014

Inhaltsverzeichnis ( 68 Artikel )

01.04.2014 | Communication | Ausgabe 4/2014

Diffusion Research in BCC Ti-Al-Mo Ternary Alloys

Yi Chen, Bin Tang, Guanglong Xu, Chuanyun Wang, Hongchao Kou, Jinshan Li, Yuwen Cui

01.04.2014 | Communication | Ausgabe 4/2014

Effect of Nitrogen Partitioning on Yield Strength in Nitrogen-Alloyed Duplex Stainless Steel During Annealing

Min-Ho Jang, Joonoh Moon, Tae-Ho Lee, Seong-Jun Park, Heung Nam Han

01.04.2014 | Communication | Ausgabe 4/2014

Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures

Anish Karmakar, S. Sivaprasad, S. Kundu, Debalay Chakrabarti

01.04.2014 | Communication | Ausgabe 4/2014

Fracture Mode of a Ni-Based Single Crystal Superalloy Containing Topologically Close-Packed Phases at Ambient Temperature

Qianying Shi, Xianfei Ding, Jingyang Chen, Xiaona Zhang, Yunrong Zheng, Qiang Feng

01.04.2014 | Communication | Ausgabe 4/2014

On Asymmetric Diffusional Solidification During Transient Liquid Phase Bonding

A. Ghobadi Bigvand, Olanrewaju A. Ojo

01.04.2014 | Communication | Ausgabe 4/2014

Predicting the Austenite Fraction After Intercritical Annealing in Lean Steels as a Function of the Initial Microstructure

Hao Chen, Xiaojun Xu, Wei Xu, Sybrand van der Zwaag

01.04.2014 | Communication | Ausgabe 4/2014

Energy-Saving Sintering of Electrically Conductive Powders by Modified Pulsed Electric Current Heating Using an Electrically Nonconductive Die

Mikio Ito, Kenta Kawahara, Keita Araki

01.04.2014 | Communication | Ausgabe 4/2014

Isothermal Grain Growth Studies on Nanostructured 9Cr-1Mo and 9Cr-1W Ferritic Steels Containing Nano-sized Oxide Dispersoids

Karthikeyan Rajan, Nandani Rai, Subramanya Sarma Vadlamani, B. S. Murty

01.04.2014 | Communication | Ausgabe 4/2014

Analysis of Crystallographic Textures in Aluminum Plates Processed by Equal Channel Angular Extrusion

Saiyi Li, Oleg V. Mishin

01.04.2014 | Foreword | Ausgabe 4/2014

International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control

Yuwen Cui, Jose M. Torralba, Xiao-Gang Lu

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control | Ausgabe 4/2014

Phase-Field Modeling of Polycrystalline Solidification: From Needle Crystals to Spherulites—A Review

László Gránásy, László Rátkai, Attila Szállás, Bálint Korbuly, Gyula I. Tóth, László Környei, Tamás Pusztai

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control | Ausgabe 4/2014

Thermodynamic Properties of Elements and Compounds in Al-Sc Binary System from Ab Initio Calculations Based on Density Functional Theory

Zeyou Zhou, Bo Wu, Shushi Dou, Chunfeng Zhao, Yuanpeng Xiong, Yufeng Wu, Shangjin Yang, Zhenyi Wei

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics, and Microstructure Control | Ausgabe 4/2014

Oxide Transformation in Cr-Mn-Prealloyed Sintered Steels: Thermodynamic and Kinetic Aspects

Eduard Hryha, Lars Nyborg

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics, and Microstructure Control | Ausgabe 4/2014

Design of Low-Melting Point Compositions Suitable for Transient Liquid Phase Sintering of PM Steels Based on a Thermodynamic and Kinetic Study

Elena Bernardo, Raquel de Oro, Mónica Campos, José Manuel Torralba

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control | Ausgabe 4/2014

The Development of the Low-Cost Titanium Alloy Containing Cr and Mn Alloying Elements

Kailiang Zhu, Na Gui, Tao Jiang, Ming Zhu, Xionggang Lu, Jieyu Zhang, Chonghe Li

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control | Ausgabe 4/2014

Austenite Formation in a Cold-Rolled Semi-austenitic Stainless Steel

Carola Celada Casero, David San Martín

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control | Ausgabe 4/2014

Effect of Prior Austenite Grain Size on Pearlite Transformation in a Hypoeuctectoid Fe-C-Mn Steel

M. M. Aranda, B. Kim, R. Rementeria, C. Capdevila, C. García de Andrés

01.04.2014 | Symposium: International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control | Ausgabe 4/2014

Design of the Precipitation Process for Ni-Al Alloys with Optimal Mechanical Properties: A Phase-Field Study

Na Ta, Lijun Zhang, Yong Du

01.04.2014 | Ausgabe 4/2014

Activity Measurements of Mg in the Ternary Cu-Mg-Si System Using Thermogravimetric Knudsen Effusion Method

Aliye Arabaci, Ibrahim Yusufoglu

01.04.2014 | Ausgabe 4/2014

B-Fe-U Phase Diagram

Marta Dias, Patrícia Almeida Carvalho, Umesh Vinaica Mardolcar, Olivier Tougait, Henri Noël, António Pereira Gonçalves

01.04.2014 | Ausgabe 4/2014

A Study on the Formation of Intermetallics During the Heat Treatment of Explosively Welded Al-Ti Multilayers

Farzad Foadian, Mansour Soltanieh, Mandana Adeli, Majid Etminanbakhsh

01.04.2014 | Ausgabe 4/2014

Co Effect on As-cast and Heat-Treated Microstructures in Ru-Containing Single-Crystal Superalloys

Qianying Shi, Xianfei Ding, Meiling Wang, Yunrong Zheng, Jianping He, Sammy Tin, Qiang Feng

01.04.2014 | Ausgabe 4/2014

Continuously Cooled Ultrafine Bainitic Steel with Excellent Strength–Elongation Combination

Sourav Das, Arunansu Haldar

01.04.2014 | Ausgabe 4/2014

A Simple Method for Calculating the Possible Habit Planes Containing One Set of Dislocations and its Applications to fcc/bct and hcp/bcc Systems

X.-F. Gu, W.-Z. Zhang

01.04.2014 | Ausgabe 4/2014

Physical and Structural Characterization of a Monocrystalline Cu-13.7Al-4.2Ni Alloy Subjected to Thermal Cycling Treatments

Elaine Cristina Pereira, Lioudmila Aleksandrovna Matlakhova, Anatoliy Nikolaevich Matlakhov, Carlos Yujiro Shigue, Sérgio Neves Monteiro

01.04.2014 | Ausgabe 4/2014

Grain Boundary Segregation Behavior of Boron in Low-Alloy Steel

Genichi Shigesato, Taishi Fujishiro, Takuya Hara

01.04.2014 | Ausgabe 4/2014

Effect of Scandium on the Interaction of Concurrent Precipitation and Recrystallization in Commercial AA3003 Aluminum Alloy

Yiyou Tu, Huan Qian, Xuefeng Zhou, Jianqing Jiang

01.04.2014 | Ausgabe 4/2014

Effect of Retained Austenite on the Fracture Toughness of Quenching and Partitioning (Q&P)-Treated Sheet Steels

Riming Wu, Wei Li, Shu Zhou, Yong Zhong, Li Wang, Xuejun Jin

01.04.2014 | Ausgabe 4/2014

Numerical Simulation of Transport Phenomena for a Double-Layer Laser Powder Deposition of Single-Crystal Superalloy

Zhaoyang Liu, Huan Qi

01.04.2014 | Ausgabe 4/2014

Optimization of Solution Treatment of Cast Al-7Si-0.3Mg and Al-8Si-3Cu-0.5Mg Alloys

Emma Sjölander, Salem Seifeddine

01.04.2014 | Ausgabe 4/2014

A Deformation Mechanism Map for the 1.23Cr-1.2Mo-0.26V Rotor Steel and Its Verification Using Neural Networks

Nafisa Bano, Ashok K. Koul, Michel Nganbe

01.04.2014 | Ausgabe 4/2014

A Stacking Fault Energy Perspective into the Uniaxial Tensile Deformation Behavior and Microstructure of a Cr-Mn Austenitic Steel

H. Barman, A. S. Hamada, T. Sahu, B. Mahato, J. Talonen, S. K. Shee, P. Sahu, D. A. Porter, L. P. Karjalainen

01.04.2014 | Ausgabe 4/2014

Residual Stress Analysis in Deep Drawn Twinning Induced Plasticity (TWIP) Steels Using Neutron Diffraction Method

Seokmin Hong, Junghoon Lee, Sunghak Lee, Wanchuck Woo, Sung-Kyu Kim, Hyoung Seop Kim

01.04.2014 | Ausgabe 4/2014

Impulse Excitation Internal Friction Study of Dislocation and Point Defect Interactions in Ultra-Low Carbon Bake-Hardenable Steel

Il-Chan Jung, Deok-Gu Kang, Bruno C. De Cooman

01.04.2014 | Ausgabe 4/2014

Environment-Assisted Cracking of Twinning Induced Plasticity (TWIP) Steel: Role of pH and Twinning

R. K. Singh Raman, Muhammed Khalissi, Shahin Khoddam

01.04.2014 | Ausgabe 4/2014

Micromechanical Testing of Fracture Initiation Sites in Welded High-Strength Low-Alloy Steel

Bjørn Rune Sørås Rogne, Christian Thaulow, Afrooz Barnoush

01.04.2014 | Ausgabe 4/2014

Effects of Start and Finish Cooling Temperatures on Microstructure and Mechanical Properties of Low-Carbon High-Strength and Low-Yield Ratio Bainitic Steels

Hyo Kyung Sung, Sunghak Lee, Sang Yong Shin

01.04.2014 | Ausgabe 4/2014

Microstructure and Mechanical Properties of Al-8 pct Si Alloy Prepared by Direct Chill Casting Under Electromagnetic and Ultrasonic Fields

Yubo Zhang, Jinchuan Jie, Li Wu, Ying Fu, Mu Li, Yiping Lu, Tingju Li

01.04.2014 | Ausgabe 4/2014

New Insights into the Electrochemical Behavior of Hematite (α-Fe2O3) Microparticles in Strong Aqueous Basic Electrolyte: Formation of Metallic Iron

Manickam Minakshi, David E. Ralph, Pritam Singh, Chun-Yang Yin

01.04.2014 | Ausgabe 4/2014

Hardness, Microstructure, and Residual Stresses in Low Carbon Steel Welding with Post-weld Heat Treatment and Temper Bead Welding

Abdulkareem S. Aloraier, Suraj Joshi, John W. H. Price, KHALED Alawadhi

01.04.2014 | Ausgabe 4/2014

Characterization of Phase Transformations and Stresses During the Welding of a Ferritic Mild Steel

D. Dye, H. J. Stone, M. Watson, R. B. Rogge

01.04.2014 | Ausgabe 4/2014

Oxide Formation Mechanisms in High Manganese Steel Welds

Dooyoung Kim, Kyutae Han, Bongkeun Lee, Ilwook Han, Joo Hyun Park, Changhee Lee

01.04.2014 | Ausgabe 4/2014

Ultrasonic Spot Welding of Aluminum to High-Strength Low-Alloy Steel: Microstructure, Tensile and Fatigue Properties

V. K. Patel, S. D. Bhole, D. L. Chen

01.04.2014 | Ausgabe 4/2014

Effect of Bonding Temperature on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material

Gopinath Thirunavukarasu, Sukumar Kundu, Brajendra Mishra, Subrata Chatterjee

01.04.2014 | Ausgabe 4/2014

Effect of Bonding Time on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material

Gopinath Thirunavukarasu, Sukumar Kundu, Brajendra Mishra, Subrata Chatterjee

01.04.2014 | Ausgabe 4/2014

Effect of Backing Plate Thermal Property on Friction Stir Welding of 25-mm-Thick AA6061

Piyush Upadhyay, Anthony Reynolds

01.04.2014 | Ausgabe 4/2014

Strain-Controlled Low-Cycle Fatigue Behavior of Friction Stir-Welded AZ31 Magnesium Alloy

J. Yang, D. R. Ni, D. Wang, B. L. Xiao, Z. Y. Ma

01.04.2014 | Ausgabe 4/2014

Overaluminizing of a CoNiCrAlY Coating by Inward and Outward Diffusion Treatments

Samira Mohseni Bababdani, Farhad Shahriari Nogorani

01.04.2014 | Ausgabe 4/2014

Microstructure, Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method

Levent Kara, Tevfik Küçükömeroğlu, Özlem Baran, İhsan Efeoğlu, Kenji Yamamoto

01.04.2014 | Ausgabe 4/2014

Structural, Electrical, and Optical Behavior of Strontium Bismuth Titanate Ceramic

Priyambada Nayak, Tanmaya Badapanda, Ranjit Pattanayak, Avinna Mishra, Shahid Anwar, Pratap Sahoo, Simanchalo Panigrahi

01.04.2014 | Ausgabe 4/2014

Solidification Map of a Nickel-Base Alloy

J. J. Blecher, T. A. Palmer, T. DebRoy

01.04.2014 | Ausgabe 4/2014

3D Quantitative Characterization of Rapidly Solidified Al-36 Wt Pct Ni

Arash Ilbagi, Hani Henein

01.04.2014 | Ausgabe 4/2014

Microstructure and Magnetic Properties of Ni2(Mn,Fe)Ga Heusler Alloys Rapidly Solidified by Melt Spinning

R. V. S. Prasad, M. Srinivas, M. Manivel Raja, G. Phanikumar

01.04.2014 | Ausgabe 4/2014

Cold Compaction of Copper Powders Under Mechanical Vibration and Uniaxial Compression

Xizhong An, Zhitao Xing, Chengchang Jia

01.04.2014 | Ausgabe 4/2014

Evolution of Microstructure and Texture During Warm Rolling of a Duplex Steel

Pinaki Prasad Bhattacharjee, M. Zaid, G. D. Sathiaraj, B. Bhadak

01.04.2014 | Ausgabe 4/2014

Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll Bonding

John S. Carpenter, Rodney J. McCabe, Shijian J. Zheng, Thomas A. Wynn, Nathan A. Mara, Irene J. Beyerlein

01.04.2014 | Ausgabe 4/2014

Study of TRIP-Aided Bainitic Ferritic Steels Produced by Hot Press Forming

Shangping Chen, Radhakanta Rana, Chris Lahaije

01.04.2014 | Ausgabe 4/2014

Dynamic Recrystallization and Precipitation in 13Cr Super-Martensitic Stainless Steels

Gholam Reza Ebrahimi, Amir Momeni, Mohammad Jahazi, Philippe Bocher

01.04.2014 | Ausgabe 4/2014

Microstructure and Mechanical Properties of Copper Processed by Twist Extrusion with a Reduced Twist-Line Slope

Marat I. Latypov, Eun Yoo Yoon, Dong Jun Lee, Roman Kulagin, Yan Beygelzimer, Majid Seyed Salehi, Hyoung Seop Kim

01.04.2014 | Ausgabe 4/2014

Laser and Surface Processes of NiTi Shape Memory Elements for Micro-actuation

Adelaide Nespoli, Carlo Alberto Biffi, Barbara Previtali, Elena Villa, Ausonio Tuissi

01.04.2014 | Ausgabe 4/2014

Tribological Behavior of A356/Al2O3 Surface Nanocomposite Prepared by Friction Stir Processing

Y. Mazaheri, F. Karimzadeh, M. H. Enayati

01.04.2014 | Ausgabe 4/2014

Phase Transformation and Morphology of Calcium Phosphate Prepared by Electrochemical Deposition Process Through Alkali Treatment and Calcination

Hui-Ting Chen, Moo-Chin Wang, Kuo-Ming Chang, Szu-Hao Wang, Wei-Jen Shih, Wong-Long Li

01.04.2014 | Ausgabe 4/2014

Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys

Palash Poddar, Arpan Das, K. L. Sahoo

01.04.2014 | Ausgabe 4/2014

Dry Sliding Wear Behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy

L. Wang, Q. Y. Zhang, X. X. Li, X. H. Cui, S. Q. Wang

01.04.2014 | Ausgabe 4/2014

The Effect of Particle Size on the Oxidation Resistance of a Nanoceria-Coated 304 Stainless Steel

Hugo F. Lopez, Haiying Zhang

01.04.2014 | Ausgabe 4/2014

Engineering Defect-Free Nanoporous Pd from Optimized Pd-Ni Precursor Alloy by Understanding Palladium-Hydrogen Interactions During Dealloying

Julius Schoop, T. John Balk

01.04.2014 | Ausgabe 4/2014

Verification of the Simulated Residual Stress in the Cross Section of Gray Cast Iron Stress Lattice Shape Casting via Thermal Stress Analysis

Yuichi Motoyama, Daiki Inukai, Toshimitsu Okane, Makoto Yoshida

01.04.2014 | Ausgabe 4/2014

Facile Synthesis of Cu2ZnSnS4 Photovoltaic Absorber Thin Films via Sulfurization of Cu2SnS3/ZnS Layers

Süleyman Kahraman, Mateja Podlogar, Slavko Bernik, Hüsnü Salih Güder

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise