Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 4/2017

Ausgabe 4/2017

Inhaltsverzeichnis ( 50 Artikel )

18.01.2017 | Communication | Ausgabe 4/2017

Effect of Treatment Area on Residual Stress and Fatigue in Laser Peened Aluminum Sheets

M. Burak Toparli, Niall Smyth, Michael E. Fitzpatrick

25.01.2017 | Communication | Ausgabe 4/2017

Innovative Technology for Preparation of Seamless Nitinol Tubes Using SHS Without Forming

Pavel Salvetr, Zuzana Pecenová, Andrea Školáková, Pavel Novák

31.01.2017 | Communication | Ausgabe 4/2017

Unusual Solidification Behavior of the Suction-Cast Cu-Zr-Al-Y Alloy Doped with Fe

Tomasz Kozieł, Grzegorz Cios, Jerzy Latuch, Krzysztof Pajor, Piotr Bała

10.02.2017 | Communication | Ausgabe 4/2017

Morphology-Dependent Hardness of Cr7C3-Ni-Rich Alloy Composite vs Orientation Independent Hardness of Cr7C3 Primary Phase in a Laser Clad Microstructure

Lakshmi Narayanan Venkatesh, Pitchuka Suresh Babu, Ravi Chandra Gundakaram, Roger D. Doherty, Shrikant V. Joshi, Indradev Samajdar

07.02.2017 | Communication | Ausgabe 4/2017

Identification of Mo-based Precipitates in Haynes 282 Superalloy

L. O. Osoba, A. K. Khan, O. A. Ojo

15.02.2017 | Symposium: Bulk Metallic Glasses XII | Ausgabe 4/2017

Foreword

Symposium on Bulk Metallic Glasses—XII

25.11.2015 | Symposium: Bulk Metallic Glasses XII | Ausgabe 4/2017

Fracture Morphology and Local Deformation Characteristics in the Metallic Glass Matrix Composite Under Tension

Y. S. Wang, X. H. Sun, G. J. Hao, Z. X. Guo, Y. Zhang, J. P. Lin, M. L. Sui, J. W. Qiao

23.01.2017 | Ausgabe 4/2017

Morphological Stability of δ-Ferrite/γ Interphase Boundary in Carbon Steel

Guowei Chang, Shuying Chen, Xudong Yue, Qingchun Li

20.01.2017 | Ausgabe 4/2017

High-Temperature Phase Equilibria of Duplex Stainless Steels Assessed with a Novel In-Situ Neutron Scattering Approach

Niklas Pettersson, Sten Wessman, Staffan Hertzman, Andrew Studer

06.02.2017 | Ausgabe 4/2017

In Situ Observation of Austenite Growth During Continuous Heating in Very-Low-Carbon Fe-Mn and Ni Alloys

M. Enomoto, X. L. Wan

18.01.2017 | Ausgabe 4/2017

Effect of Cooling Rate and Chemical Composition on Microstructure and Properties of Naturally Cooled Vanadium-Microalloyed Steels

Anish Karmakar, Pooja Sahu, Suman Neogy, Debalay Chakrabarti, Rahul Mitra, Subrata Mukherjee, Saurabh Kundu

01.02.2017 | Ausgabe 4/2017

Oxidation of Alloy 600 and Alloy 690: Experimentally Accelerated Study in Hydrogenated Supercritical Water

Tyler Moss, Guoping Cao, Gary S. Was

30.01.2017 | Ausgabe 4/2017

Accelerated Stress Corrosion Crack Initiation of Alloys 600 and 690 in Hydrogenated Supercritical Water

Tyler Moss, Gary S. Was

20.01.2017 | Ausgabe 4/2017

Crack Growth Modeling and Life Prediction of Pipeline Steels Exposed to Near-Neutral pH Environments: Dissolution Crack Growth and Occurrence of Crack Dormancy in Stage I

Jiaxi Zhao, Weixing Chen, Mengshan Yu, Karina Chevil, Reg Eadie, Greg Van Boven, Richard Kania, Jenny Been, Sean Keane

12.01.2017 | Ausgabe 4/2017

Crack Growth Modeling and Life Prediction of Pipeline Steels Exposed to Near-Neutral pH Environments: Stage II Crack Growth and Overall Life Prediction

Jiaxi Zhao, Weixing Chen, Mengshan Yu, Karina Chevil, Reg Eadie, Jenny Been, Greg Van Boven, Richard Kania, Sean Keane

17.01.2017 | Ausgabe 4/2017 Open Access

748 K (475 °C) Embrittlement of Duplex Stainless Steel: Effect on Microstructure and Fracture Behavior

Cem Örnek, M. G. Burke, T. Hashimoto, D. L. Engelberg

01.02.2017 | Ausgabe 4/2017

Grain Boundary Engineering of a Low Stacking Fault Energy Ni-based Superalloy

Joshua McCarley, Randolph Helmink, Robert Goetz, Sammy Tin

07.02.2017 | Ausgabe 4/2017

Tensile Properties of Medium Mn Steel with a Bimodal UFG α + γ and Coarse δ-Ferrite Microstructure

Seonjong Lee, Sunmi Shin, Minhyeok Kwon, Kyooyoung Lee, Bruno C. De Cooman

07.02.2017 | Ausgabe 4/2017

A New Theoretical Approach Based on the Maxwell Model to Obtain Rheological Properties of Solidifying Alloys and Its Validation

Akira Matsushita, Ryosuke Takai, Hideaki Ezaki, Toshimitsu Okane, Makoto Yoshida

20.01.2017 | Ausgabe 4/2017

Friction Stir Welding in Wrought and Cast Aluminum Alloys: Weld Quality Evaluation and Effects of Processing Parameters on Microstructure and Mechanical Properties

Yi Pan, Diana A. Lados

02.02.2017 | Ausgabe 4/2017

Characterization of Discontinuous Coarsening Reaction Products in INCONEL® Alloy 740H® Fusion Welds

Daniel H. Bechetti, John N. Dupont, Masashi Watanabe, John J. de Barbadillo

25.01.2017 | Ausgabe 4/2017

Effect of Dwell Time on Joint Interface Microstructure and Strength of Dissimilar Friction Stir Spot-Welded Al-5083 and St-12 Alloy Sheets

Eskandar Fereiduni, Mojtaba Movahedi, Amir Hossein Kokabi, Hossein Najafi

10.02.2017 | Ausgabe 4/2017

Effect of Beam Oscillation on Microstructure and Mechanical Properties of AISI 316L Electron Beam Welds

Jyotirmaya Kar, Sanat Kumar Roy, Gour Gopal Roy

07.02.2017 | Ausgabe 4/2017

Microstructure and Mechanical Properties of 21-6-9 Stainless Steel Electron Beam Welds

John W. Elmer, G. Fred Ellsworth, Jeffrey N. Florando, Ilya V. Golosker, Rupalee P. Mulay

17.01.2017 | Ausgabe 4/2017

Effect of Initial Iron Content in a Zinc Bath on the Dissolution Rate of Iron During a Hot Dip Galvanizing Process

Sang Myung Lee, Suk Kyu Lee, Doo-Jin Paik, Joo Hyun Park

17.01.2017 | Ausgabe 4/2017

A Pore-Centric Model for Combined Shrinkage and Gas Porosity in Alloy Solidification

Vahid Khalajzadeh, Kent D. Carlson, Daniel G. Backman, Christoph Beckermann

13.01.2017 | Ausgabe 4/2017

Solidification Behavior and Cooling Curves for Hypereutectic Fe-21 At. Pct B Alloy

Junfeng Xu, Zengyun Jian, Bo Dang, Di Zhang, Feng Liu

30.01.2017 | Ausgabe 4/2017

Statistical Study to Evaluate the Effect of Processing Variables on Shrinkage Incidence During Solidification of Nodular Cast Irons

J. M. Gutiérrez, A. Natxiondo, J. Nieves, A. Zabala, J. Sertucha

08.02.2017 | Ausgabe 4/2017

Dendritic Growth, Solidification Thermal Parameters, and Mg Content Affecting the Tensile Properties of Al-Mg-1.5 Wt Pct Fe Alloys

Leonardo F. Gomes, Bismarck L. Silva, Amauri Garcia, José E. Spinelli

07.02.2017 | Ausgabe 4/2017

A Study on Hot Tearing Behavior of Al-1 Wt Pct Cu Alloy Under Various Strain Rates During Casting Process

Majid Bagheri, Mostafa Alizadeh, Ali R. Ahmadi

06.01.2017 | Ausgabe 4/2017

A Comparison of the Plastic-Flow Response of a Powder-Metallurgy Nickel-Base Superalloy Under Nominally-Isothermal and Transient-Heating Hot-Working Conditions

S. L. Semiatin, D. W. Mahaffey, D. J. Tung, W. Zhang, O. N. Senkov

18.01.2017 | Ausgabe 4/2017

Microstructural and Hardness Evaluations of a Centrifuged Sn-22Pb Casting Alloy Compared with a Lead-Free SnAg Alloy

Luz Myrian Satizabal, Diego Costa, Guilherme Ottamr Hainick, Diego Rodrigo Moura, Ausdinir Danilo Bortolozo, Wislei Riuper Osório

13.01.2017 | Ausgabe 4/2017

Bending Distortion Analysis of a Steel Shaft Manufacturing Chain from Cold Drawing to Grinding

Vinicius Waechter Dias, Alexandre da Silva Rocha, Juliana Zottis, Juan Dong, Jérémy Epp, Hans Werner Zoch

17.01.2017 | Ausgabe 4/2017

Effect of Recrystallization and Phase Transitions on the Mechanical Properties of Semihard Magnetic FeCo-7.15V Alloy During the Thermomechanical Process

Saeed Hasani, Morteza Shamanian, Ali Shafyei, Majid Nezakat, Hossein Mostaan, Jerzy A. Szpunar

26.01.2017 | Ausgabe 4/2017

Production of a Powder Metallurgical Hot Work Tool Steel with Harmonic Structure by Mechanical Milling and Spark Plasma Sintering

Faraz Deirmina, Massimo Pellizzari, Matteo Federici

17.01.2017 | Ausgabe 4/2017

Improving the Mechanical Properties of the Fusion Zone in Electron-Beam Welded Ti-5Al-5Mo-5V-3Cr Alloys

Christopher J. Marvel, Joseph C. Sabol, Timotius Pasang, Masashi Watanabe, Wojciech Z. Misiolek

06.02.2017 | Ausgabe 4/2017

Statistically Guided Development of Laser-Assisted Cold Spray for Microstructural Control of Ti-6Al-4V

Aaron M. Birt, Victor K. Champagne Jr., Richard D. Sisson Jr., Diran Apelian

06.02.2017 | Ausgabe 4/2017

EIS Behavior of Experimental High-Strength Steel in Near-Neutral pH and Load Conditions

Jesus Israel Barraza-Fierro, Sergio Alonso Serna-Barquera, Bernardo Fabian Campillo-Illanes, Homero Castaneda

10.02.2017 | Ausgabe 4/2017

Formation of Widmanstätten Austenite in Strip Cast Grain-Oriented Silicon Steel

Hong-Yu Song, Hai-Tao Liu, Guo-Dong Wang, John J. Jonas

06.02.2017 | Ausgabe 4/2017

A Study of Interdiffusion in the Fe-C/Ti System Under Equilibrium and Nonequilibrium Conditions

T. N. Prasanthi, C. Sudha, S. Saroja

07.02.2017 | Ausgabe 4/2017

Growth Mechanism of Primary and Eutectic TiB2 Particles in a Hypereutectic Steel Matrix Composite

Z. C. Luo, B. B. He, Y. Z. Li, M. X. Huang

27.01.2017 | Ausgabe 4/2017

Nanoprecipitates and Their Strengthening Behavior in Al-Mg-Si Alloy During the Aging Process

Hui Li, Wenqing Liu

20.01.2017 | Ausgabe 4/2017

The Influence of Al Content and Thickness on the Microstructure and Tensile Properties in High-Pressure Die Cast Magnesium Alloys

Erin Deda, Tracy D. Berman, John E. Allison

17.01.2017 | Ausgabe 4/2017

Porosity, Microstructure, and Mechanical Properties of Ti-6Al-4V Alloy Parts Fabricated by Powder Compact Forging

Mingtu Jia, Deliang Zhang, Jiamiao Liang, Brian Gabbitas

06.02.2017 | Ausgabe 4/2017

Precipitate Evolution and Strengthening in Supersaturated Rapidly Solidified Al-Sc-Zr Alloys

Kyle Deane, S. L. Kampe, Douglas Swenson, P. G. Sanders

06.02.2017 | Ausgabe 4/2017

Characterization of Al-Mg Alloy Aged at Low Temperatures

Gaosong Yi, David A. Cullen, Kenneth C. Littrell, William Golumbfskie, Erik Sundberg, Michael L. Free

17.01.2017 | Ausgabe 4/2017

Indentation Pileup Behavior of Ti-6Al-4V Alloy: Experiments and Nonlocal Crystal Plasticity Finite Element Simulations

Fengbo Han, Bin Tang, Xu Yan, Yifei Peng, Hongchao Kou, Jinshan Li, Ying Deng, Yong Feng

20.01.2017 | Ausgabe 4/2017

Analysis of Particle-Stimulated Nucleation (PSN)-Dominated Recrystallization for Hot-Rolled 7050 Aluminum Alloy

Khaled F. Adam, Zhengdong Long, David P. Field

30.01.2017 | Ausgabe 4/2017

Electrochemical Corrosion Behavior of Spray-Formed Boron-Modified Supermartensitic Stainless Steel

Guilherme Zepon, Ricardo P. Nogueira, Claudio S. Kiminami, Walter J. Botta, Claudemiro Bolfarini

06.02.2017 | Ausgabe 4/2017

The Effect of TiO2 and B2O3 Additions on the Grain Growth of ZnO

Gökhan Hardal, Berat Yüksel Price

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise