Ausgabe 5/2005
Inhalt (30 Artikel)
Case reviews on the effect of microstructure on the corrosion behavior of austenitic alloys for processing and storage of nuclear waste
V. Kain, P. Sengupta, P. K. De, S. Banerjee
Ceramic coatings for a corrosion-resistant nuclear waste container evaluated in simulated ground water at 90 °C
Jeffery J. Haslam, Joseph C. Farmer, Robert W. Hopper, Keith R. Wilfinger
Corrosion behavior of carbon steel rock bolt in simulated Yucca Mountain ground waters
A. Yilmaz, R. B. Rebak, D. Chandra
Corrosion-creep interaction of stainless alloys in acid chloride solutions
K. S. Raja, S. A. Namjoshi, D. A. Jones
Risk assessment of uniform and localized corrosion of alloy 22
A. Passarelli, T. Bloomer, T. Ahn, D. Dunn, O. Pensado
General corrosion of alloy 22: Experimental determination of model parameters from electrochemical impedance spectroscopy data
L. Glen McMillion, D. A. Jones, Adan Sun, Digby D. MacDonald
Topologically close-packed phase precipitation and thermal stability in alloy 22
Y. -M. Pan, D. S. Dunn, G. A. Cragnolino
Electrochemical methods to detect susceptibility of Ni-Cr-Mo-W alloy 22 to intergranular corrosion
D. D. Gorhe, K. S. Raja, S. A. Namjoshi, Velimir Radmilovic, Alfredo Tolly, D. A. Jones
The effect of potential and aging on the Pb-assisted stress corrosion cracking susceptibility of alloy 22 gas tungsten arc-welded weldments
Aladar A. Csontos, Yi-Ming Pan, Darrell S. Dunn, Leitai Yang, Gustavo A. Cragnolino
Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22
Martín A. Rodríguez, Ricardo M. Carranza, Raúl B. Rebak
Stress-corrosion-crack initiation and growth-rate studies on titanium grade 7 and alloy 22 in concentrated groundwater
P. L. Andresen, G. M. Catlin, P. W. Emigh, L. M. Young, G. M. Gordon
Effect of different mo contents on tensile and corrosion behaviors of CD4MCU cast duplex stainless steels
Younghwan Jang, Sangshik Kim, Jehyun Lee
Microstructural modification in full penetration and partial penetration electron beam welds in INCONEL-718 (IN-718) and its effect on fatigue crack initiation
A. K. Abdul Jawwad, M. Strangwood, C. L. Davis
Deformation mechanisms in superplastic AA5083 materials
Mary-Anne Kulas, W. Paul Green, Eric M. Taleff, Paul E. Krajewski, Terry R. McNelley
Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Chung-Jin Tong, Min-Rui Chen, Jien-Wei Yeh, Su-Jien Lin, Swe-Kai Chen, Tao-Tsung Shun, Shou-Yi Chang
Lead-free solder materials: Experimental enthalpies of mixing of liquid Ag-In-Pd-Sn alloys
Christoph Luef, Hans Flandoreer, Herbert Ipser
Phase selection during directional solidification of peritectic alloys
T. A. Lograsso, B. C. Fuh, R. Trivedi
Microstructure and properties of Ni3Si alloyed with Cr fabricated by self-propagating high-temperature synthesis casting route
Qinling Bi, Peiquing La, Yutian Ding
The microstructural evolution of near beta alloy Ti-10V-2Fe-3Al during subtransus forging
Martin Jackson, Richard Dashwood, Harvey Flower, Leo Christodoulou
Microstructural stability of fine-grained fully lamellar XD TiAl alloys by step aging
Hanliang Zhu, K. Maruyama, D. Y. Seo, P. Au
Influence of severe plastic deformations on secondary phase precipitation in a 6082 Al-Mg-Si alloy
M. Cabibbo, E. Evangelista, M. Vedani
Comparison of compressive deformation of ultrafine-grained 5083 Al alloy at 77 and 298 K
Jun Hwan Park, Kyung-Tae Park, Yong Shin Lee, Won Jong Nam
Effect of solidification cooling rate on the morphology and number per unit volume of primary Mg2Si particles in a hypereutectic Al-Mg-Si alloy
M. F. Ourfali, I. Todd, H. Jones
Prediction of the kinetics of static globularization of Ti-6Al-4V
S. L. Semiatin, N. Stefansson, R. D. Doherty
Hardness of pulsed electric current sintered and hot isostatically pressed Mo(Si,Al)2
Jun Tanabe