Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 5/2015

Ausgabe 5/2015

Inhaltsverzeichnis ( 46 Artikel )

01.05.2015 | Communication | Ausgabe 5/2015

Macroscopic Segregation and Stress Corrosion Cracking in 7xxx Series Aluminum Alloy Arc Welds

Tyler E. Borchers, Donald P. McAllister, Wei Zhang

01.05.2015 | Communication | Ausgabe 5/2015

Unusual Morphological Evolution of the Cu Pillar/Solder Micro-joints During High-Temperature Annealing

Hsi-Kuei Cheng, Yu-Jie Lin, Hou-Chien Chang, Kuo-Chio Liu, Ying-Lang Wang, Tzeng-Feng Liu, Chih-Ming Chen

01.05.2015 | Communication | Ausgabe 5/2015

Al/C60 Nanocomposites Fabricated by High-Pressure Torsion

Hamed Asgharzadeh, Soo-Hyun Joo, Hyoung Seop Kim

01.05.2015 | Ausgabe 5/2015

Precipitation Behavior in the Heat-Affected Zone of Boron-Added 9Cr-3W-3Co Steel During Post-Weld Heat Treatment and Creep Deformation

Yuan Liu, Susumu Tsukamoto, Kota Sawada, Masaaki Tabuchi, Fujio Abe

01.05.2015 | Ausgabe 5/2015

Special Orientation Relationships of CuZr2 in the Annealed Zr64.5Cu35.5 Metallic Glass

Pengfei Yu, Lijun Zhang, Hu Cheng, Huan Zhang, Qin Jing, Mingzhen Ma, Peter K. Liaw, Gong Li, Riping Liu

01.05.2015 | Ausgabe 5/2015

Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies

Ercan Cakmak, Hahn Choo, Jun-Yun Kang, Yang Ren

01.05.2015 | Ausgabe 5/2015

Microstructural Features Affecting Tempering Behavior of 16Cr-5Ni Supermartensitic Steel

Massimo De Sanctis, Gianfranco Lovicu, Renzo Valentini, Antonella Dimatteo, Randa Ishak, Umberto Migliaccio, Roberto Montanari, Emanuele Pietrangeli

01.05.2015 | Ausgabe 5/2015

Effects of Film Stress and Geometry on Texture Evolution Before and After the Martensitic Transformation in a Nanocrystalline Co Thin Film

Sung Bo Lee, Dong-Ik Kim, Yanghoo Kim, Seung Jo Yoo, Ji Young Byun, Heung Nam Han, Dong Nyung Lee

01.05.2015 | Ausgabe 5/2015

Effects of Erosion Angle on Erosion Properties of Fe-B Alloy in Flowing Liquid Zinc

Guangzhu Liu, Jiandong Xing, Shengqiang Ma, Yaling He, Hanguang Fu, Yuan Gao, Yong Wang, Yiran Wang

01.05.2015 | Ausgabe 5/2015

Evaluation of the Deformation Behavior of a Semi-solid Hypereutectic Al-Si Alloy Compressed in a Drop-Forge Viscometer

Yasuyoshi Fukui, Daisaku Nara, Noriyoshi Kumazawa

01.05.2015 | Ausgabe 5/2015

Effect of Annealing Time on Microstructural Evolution and Deformation Characteristics in 10Mn1.5Al TRIP Steel

Qihang Han, Yulong Zhang, Li Wang

01.05.2015 | Ausgabe 5/2015

Texture Development and Plastic Deformation in a Pilgered Zircaloy-4 Tube

Jaiveer Singh, Sivasambu Mahesh, Gulshan Kumar, Prita Pant, D. Srivastava, G. K. Dey, N. Saibaba, I. Samajdar

01.05.2015 | Ausgabe 5/2015

Bimodal Grain Size Distribution Enhances Strength and Ductility Simultaneously in a Low-Carbon Low-Alloy Steel

Péter J. Szabó, David P. Field, Bertalan Jóni, Jelena Horky, Tamás Ungár

01.05.2015 | Ausgabe 5/2015

Method of Estimating the Long-term Rupture Strength of 11Cr-2W-0.4Mo-1Cu-Nb-V Steel

Manabu Tamura

01.05.2015 | Ausgabe 5/2015

Microstructural Characterization and Mechanical Properties Analysis of Weld Metals with Two Ni Contents During Post-Weld Heat Treatments

Da-yong Wu, Xiu-lin Han, Hong-tao Tian, Bo Liao, Fu-ren Xiao

01.05.2015 | Ausgabe 5/2015

Optimizing the Compressive Strength of Strain-Hardenable Stretch-Formed Microtruss Architectures

Bosco Yu, Khaled Abu Samk, Glenn D. Hibbard

01.05.2015 | Ausgabe 5/2015

Effect of Indium Alloying with Lead on the Mechanical Properties and Corrosion Resistance of Lead-Indium Alloys in Sulfuric Acid Solution

Abdel-Rahman El-Sayed, Eslam M. M. Ibrahim, Hossnia S. Mohran, Mohamed Ismael, Hoda Abdel-Shafy Shilkamy

01.05.2015 | Ausgabe 5/2015

Laser-Arc Hybrid Welding of Dissimilar Titanium Alloy and Stainless Steel Using Copper Wire

Ming Gao, Cong Chen, Lei Wang, Zemin Wang, Xiaoyan Zeng

01.05.2015 | Ausgabe 5/2015

Influence of Stored Strain on Fabricating of Al/SiC Nanocomposite by Friction Stir Processing

M. Sarkari Khorrami, M. Kazeminezhad, A. H. Kokabi

01.05.2015 | Ausgabe 5/2015

Effect of Close-Packed Plane Boundaries in a Bain Zone on the Crack Path in Simulated Coarse-Grained HAZ of Bainitic Steel

Hidenori Terasaki, Yutaro Shintome, Yu-ichi Komizo, Mitsuru Ohata, Koji Moriguchi, Yusaku Tomio

01.05.2015 | Ausgabe 5/2015

Influences of TiO2 Addition on the Crystallization Behavior, Microstructure, and Magnetic Properties of Li2O-MnO2-Fe2O3-CaO-P2O5-SiO2 Glasses

Huy-Zu Cheng, Huey-Jiuan Lin, Moo-Chin Wang, Chien-Fa Wang, Chi-Shiung Hsi, XiuJian Zhao, Hong Jiang, Chang-Jiu Li, Peng Lu

01.05.2015 | Ausgabe 5/2015

Extrusion Suppression of TSV Filling Metal by Cu-W Electroplating for Three-Dimensional Microelectronic Packaging

Myong-Hoon Roh, Ashutosh Sharma, Jun-Hyeong Lee, Jae-Pil Jung

01.05.2015 | Ausgabe 5/2015

Effects of NaBF4 + NaF on the Tensile and Impact Properties of Al-Si-Mg-Fe Alloys

Zongning Chen, Tongmin Wang, Yufei Zhao, Yuanping Zheng, Huijun Kang

01.05.2015 | Ausgabe 5/2015

Microstructure Characterization and Thermal Analysis of Aluminum Alloy B206 During Solidification

N. Haghdadi, A. B. Phillion, D. M. Maijer

01.05.2015 | Ausgabe 5/2015

SDAS, Si and Cu Content, and the Size of Intermetallics in Al-Si-Cu-Mg-Fe Alloys

Tharmalingam Sivarupan, John Andrew Taylor, Carlos Horacio Cáceres

01.05.2015 | Ausgabe 5/2015

An Investigation on Hot Tearing of Mg-4.5Zn-(0.5Zr) Alloys with Y Additions

Zhi Wang, Jiangfeng Song, Yuanding Huang, Amirthalingam Srinivasan, Zheng Liu, Karl Ulrich Kainer, Norbert Hort

01.05.2015 | Ausgabe 5/2015

On Porosity Formation in Metal Matrix Composites Made with Dual-Scale Fiber Reinforcements Using Pressure Infiltration Process

Reihaneh Etemadi, Krishna M. Pillai, Pradeep K. Rohatgi, Sajad Ahmad Hamidi

01.05.2015 | Ausgabe 5/2015

Microstructure Evolution and Mechanical Properties of Rheo-Squeeze Cast Mg-9Al-1Zn Alloy by Experiments and Thermodynamic Calculation

Hong-Min Guo, Shu-Guo Zhang, Xiang-Jie Yang, Xu-Bo Liu, Hua-Lan Jin

01.05.2015 | Ausgabe 5/2015 Open Access

Grain Breakup During Elevated Temperature Deformation of an HCP Metal

Peter D. Honniball, Michael Preuss, David Rugg, João Quinta da Fonseca

01.05.2015 | Ausgabe 5/2015

The Influence of Heat Treatment on the Microstructure and Machinability of a Prehardened Mold Steel

Hamed Hoseiny, Francisca G. Caballero, Rachid M’Saoubi, Berne Högman, Jonathan Weidow, Hans-Olof Andrén

01.05.2015 | Ausgabe 5/2015

Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation

Davoud Mashhadi Jafarlou, Erfan Zalnezhad, Abdelmagid Salem Hamouda, Ghader Faraji, Noor Azizi Bin Mardi, Mohsen Abdelnaeim Hassan Mohamed

01.05.2015 | Ausgabe 5/2015

Semi-solid Powder Rolling of AA7050 Alloy Strips: Densification and Deformation Behaviors

Xia Luo, Yunzhong Liu, Zhuoqiang Mo, Caixin Gu

01.05.2015 | Ausgabe 5/2015

An Experimental Evaluation of the Gerdemann–Jablonski Compaction Equation

Ronald Machaka, Hilda K. Chikwanda

01.05.2015 | Ausgabe 5/2015

High-Temperature Deformation Processing Map Approach for Obtaining the Desired Microstructure in a Multi-component (Ni-Ti-Cu-Fe) Alloy

Niraj Nayan, Gaurav Singh, S. V. S. Narayana Murty, Abhay K. Jha, Bhanu Pant, Koshy M. George

01.05.2015 | Ausgabe 5/2015 Open Access

Electron Backscatter Diffraction Study on Microstructure, Texture, and Strain Evolution in Armco Iron Severely Deformed by the Differential Speed Rolling Method

Wojciech Polkowski, Paweł Jóźwik, Zbigniew Bojar

01.05.2015 | Ausgabe 5/2015

Physical Simulation of Investment Casting of Complex Shape Parts

Mehdi Rahimian, Srdjan Milenkovic, Laura Maestro, Aitor Eguidazu Ruiz De Azua, Ilchat Sabirov

01.05.2015 | Ausgabe 5/2015

Determination of the Heat Transfer Coefficient at the Metal-Mold Interface During Centrifugal Casting

Santiago Vacca, Marcelo A. Martorano, Romulo Heringer, Mário Boccalini Jr.

01.05.2015 | Ausgabe 5/2015

Microstructure Evolution During Al, Ti, and Mo Surface Deposition and Volume Diffusion in Ni-20Cr Wires and Woven Structures

Cong Wang, David C. Dunand

01.05.2015 | Ausgabe 5/2015

Thermal Stability and Properties of Deformation-Processed Cu-Fe In Situ Composites

Keming Liu, Zhengyi Jiang, Jingwei Zhao, Jin Zou, Lei Lu, Deping Lu

01.05.2015 | Ausgabe 5/2015

Wettability of Cu-Ti Alloys on Graphite in Different Placement States of Copper and Titanium at 1373 K (1100 °C)

Weiji Mao, Tomoko Yamaki, Noriko Miyoshi, Nobuya Shinozaki, Toshifumi Ogawa

01.05.2015 | Ausgabe 5/2015

The Parameters and Fundamental Zones of Twin-Dependent Triple Junction Distributions

Graden B. Hardy, David P. Field

01.05.2015 | Ausgabe 5/2015

Effect of Chromium Content on the Oxidation Behavior of Ni-Cr Model Alloys in Superheated Steam

Fethi Hamdani, Hiroshi Abe, Benoit Ter-Ovanessian, Bernard Normand, Yutaka Watanabe

01.05.2015 | Ausgabe 5/2015

Effects of Annealing Temperature on the Electrochemical Hydrogen Storage Behaviors of La-Mg-Ni-Based A2B7-Type Electrode Alloys

Yanghuan Zhang, Zeming Yuan, Tingting Zhai, Tai Yang, Wengang Bu, Shihai Guo

01.05.2015 | Ausgabe 5/2015

Cooling Rate Determination in Additively Manufactured Aluminum Alloy 2219

Craig A. Brice, Noah Dennis

01.05.2015 | Ausgabe 5/2015

Microstructure and Mechanical Properties of Laser Clad and Post-cladding Tempered AISI H13 Tool Steel

Gururaj Telasang, Jyotsna Dutta Majumdar, Nitin Wasekar, G. Padmanabham, Indranil Manna

01.05.2015 | Erratum | Ausgabe 5/2015

Erratum to: Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering

L. M. Sochalski-Kolbus, E. A. Payzant, P. A. Cornwell, T. R. Watkins, S. S. Babu, R. R. Dehoff, M. Lorenz, O. Ovchinnikova, C. Duty

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise