Ausgabe 1/2020
Inhalt (30 Artikel)
Influence of Temperature on the Structure of Pore–Fracture of Sandstone
Peihua Jin, Yaoqing Hu, Jixi Shao, Zhijun Liu, Gan Feng, Su Song
Slope Stability Analysis using Equivalent Mohr–Coulomb and Hoek–Brown criteria
Hossein Rafiei Renani, C. Derek Martin
Effect of Cyclic Loading on the Shear Behaviours of Both Unfilled and Infilled Rough Rock Joints Under Constant Normal Stiffness Conditions
Guansheng Han, Hongwen Jing, Yujing Jiang, Richeng Liu, Jiangyu Wu
A Bounding Surface Plasticity Model Considering Spacing Ratio for Overconsolidated Jointed Soft Rocks
Xiaosen Kang, Hongjian Liao
Graphic Examples of a Logical Nonlinear Strength Criterion for Intact Rock
Baotang Shen, Jingyu Shi, Nick Barton
Experimental and Numerical Study into 3D Crack Growth from a Spherical Pore in Biaxial Compression
Hongyu Wang, Arcady Dyskin, Elena Pasternak, Phil Dight, Mohammad Sarmadivaleh
A Three-Dimensional Failure Criterion for Hard Rocks Under True Triaxial Compression
Xia-Ting Feng, Rui Kong, Chengxiang Yang, Xiwei Zhang, Zhaofeng Wang, Qiang Han, Gang Wang
Development of a Coupled DDA–SPH Method and its Application to Dynamic Simulation of Landslides Involving Solid–Fluid Interaction
Xinyan Peng, Pengcheng Yu, Guangqi Chen, Mingyao Xia, Yingbin Zhang
Numerical Investigation of the Mechanical and Damage Behaviors of Veined Gneiss During True-Triaxial Stress Path Loading by Simulation of In Situ Conditions
Qingsheng Bai, R. Paul Young
Moment Tensor Analysis of Acoustic Emissions for Cracking Mechanisms During Schist Strain Burst
Fuqiang Ren, Chun Zhu, Manchao He
Investigation on the Rock Surface Support Performance of Welded Steel Mesh and Thin Spray-On Liners Using Full-Scale Laboratory Testing
Zhenjun Shan, Ian Porter, Jan Nemcik, Ernest Baafi, Zhenyu Zhang
Development of a Cutting Force Model for a Single PDC Cutter Based on the Rock Stress State
Wei Li, Xin Ling, Hui Pu
Macro- and Microstructural Characteristics of the Tension–Shear and Compression–Shear Fracture of Granite
Jun Chen, Hui Zhou, Zhiquan Zeng, Jingjing Lu
Experimental Study of an Orientation and Resin-Lifting Device for Improving the Performance of Resin-Anchored Roof Bolts
Mengxiong Fu, Shaowei Liu, Housheng Jia, Deyin He
A Stochastic Study of Flow Anisotropy and Channelling in Open Rough Fractures
Sophie Marchand, Olivier Mersch, Michael Selzer, Fabian Nitschke, Martin Schoenball, Jean Schmittbuhl, Britta Nestler, Thomas Kohl
Ultimate Bearing Capacity of Rock Mass Foundations Subjected to Seepage Forces Using Modified Hoek–Brown Criterion
Hazim AlKhafaji, Meysam Imani, Ahmad Fahimifar
Stability Analysis of a Non-pillar-Mining Approach Using a Combination of Discrete Fracture Network and Discrete-Element Method Modeling
G. L. Zhu, R. L. Sousa, M. C. He, P. Zhou, J. Yang
Highly Efficient and Simplified Method for Measuring the Permeability of Ultra-low Permeability Rocks Based on the Pulse-Decay Technique
Bo He, Lingzhi Xie, Peng Zhao, Li Ren, Yao Zhang
Physical and Mechanical Properties of Granite After High-Temperature Treatment
Yan Qin, Hong Tian, Neng-Xiong Xu, Yu Chen
Correction to: Numerical Modelling of Water Flow Through Granular Material for Isolated and Simultaneous Extractions in Block Caving
Katherine Sánchez, Sergio Palma, Raúl L. Castro
Shear Behavior of the Interface Between Rock and Cemented Backfill: Effect of Curing Stress, Drainage Condition and Backfilling Rate
Kun Fang, Mamadou Fall
Cyclic Frictional Responses of Planar Joints Under Cyclic Normal Load Conditions: Laboratory Tests and Numerical Simulations
Wengang Dang, Heinz Konietzky, Thomas Frühwirt, Martin Herbst
Distributed-Spring Edge-to-Edge Contact Model for Two-Dimensional Discontinuous Deformation Analysis
Pengcheng Yu, Yingbin Zhang, Xinyan Peng, Guangqi Chen, John X. Zhao
Effect of Contributing Parameters on the Behaviour of a Bolted Rock Joint Subjected to Combined Pull-and-Shear Loading: A DEM Approach
Mahdi Saadat, Abbas Taheri
Alternative Approaches for the Determination of Unconfined Rock Deformation and Strength Properties
Thomas Stoxreiter, Paul Gehwolf, Robert Galler
A New Contact Formulation for Large Frictional Sliding and Its Implement in the Explicit Numerical Manifold Method
Wei Wei, Qi Zhao, Qinghui Jiang, Giovanni Grasselli
Correction to: Characterization of 4.2-km-Deep Fractured Granodiorite Cores from Pohang Geothermal Reservoir, Korea
Saeha Kwon, Linmao Xie, Sehyeok Park, Kwang-Il Kim, Ki-Bok Min, Kwang Yeom Kim, Li Zhuang, Jaiwon Choi, Hanna Kim, Tae Jong Lee
Experimental Evaluation of Rapid Flat Jack Testing with Various Shaped Saw-Cut Slots
A. M. Mckenney, A. G. Corkum
A New Way to Replicate the Highly Stressed Soft Rock: 3D Printing Exploration
Zhijun Wu, Bo Zhang, Lei Weng, Quansheng Liu, Louis Ngai Yuen Wong