Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2016

Ausgabe 1-4/2016

Advanced Manufacturing (pp. 1-50)

Inhaltsverzeichnis ( 100 Artikel )

24.10.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Investigation on diamond wire break-in and its effects on cutting performance in multi-wire sawing

Sangjik Lee, Hyoungjae Kim, Doyeon Kim, Chuljin Park

04.11.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Study on high-speed machining of Inconel 718 focusing on tool surface topography of CBN cutting tool

Tatsuya Sugihara, Shota Takemura, Toshiyuki Enomoto

03.12.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Synergetic repetitive control—a plug-in hybrid control method for precision motion control

Chi-Ying Lin, Yu-Sheng Zeng

15.12.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Influence of external magnetic field on permanent magnet by EDM

Hideki Takezawa, Nobuhiro Yokote, Naotake Mohri

10.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Development of an innovative small ball-burnishing tool embedded with a load cell

Fang-Jung Shiou, Quoc-Nguyen Banh

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Model of coating wear degradation in precision glass molding

Fritz Klocke, Olaf Dambon, Michael Rohwerder, Frank Bernhardt, Marcel Friedrichs, Sergiy V. Merzlikin

16.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Effect of pulse on pulse frequency on welding process and welding quality of pulse on pulse MIG welding-brazing of aluminum alloys to stainless steel

Jianxiong Li, Huan Li, Huiliang Wei, Yanbing Ni

16.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

A parallel machine batch scheduling problem in a brewing company

César A. Sáenz-Alanís, Jobish V.D., M. Angélica Salazar-Aguilar, Vincent Boyer

16.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

An access detection and machine cycle tracking system for machine safety

M. D. Moreno-Rabel, J. A. Fernández-Mu noz

16.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Investigating the forming limits of a flax fibre-reinforced polypropylene composite in different water treatment conditions

Wentian Wang, Adrian Lowe, Shankar Kalyanasundaram

16.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Stability prediction of thin-walled workpiece made of Al7075 in milling based on shifted Chebyshev polynomials

Zhenghu Yan, Zhibing Liu, Xibin Wang, Biao Liu, Zhiwen Luo, Dongqian Wang

17.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Evaluation of high performance constructive heuristics for the flow shop with makespan minimization

Fernando Luis Rossi, Marcelo Seido Nagano, Roberto Fernandes Tavares Neto

17.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Slab analysis of asymmetrical clad sheet bonded before rolling process

Ali Parvizi, Farshid Afrouz

17.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Investigations on laser micromilling of circular micro pin fins for heat sink cooling systems

Daxiang Deng, Wei Wan, Qinsong Huang, Xiang Huang, Wei Zhou

17.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Modeling of kinematics errors and alignment method of a swing arm ultra-precision diamond turning machine

Honghui Yao, Zengqiang Li, Xuesen Zhao, Tao Sun, Gennadii Dobrovolskyi, Guo Li

18.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Discussion of ultrashort voltage pulses electrochemical micromachining: a review

Sebastian Skoczypiec

18.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Investigation of the effects of Stewart platform-type industrial robot on stability of robotic milling

L. T. Tunc, Jay Shaw

18.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Soft computing models and intelligent optimization system in electro-discharge machining of SiC/Al composites

Wuyi Ming, Jun Ma, Zhen Zhang, Hao Huang, Dili Shen, Guojun Zhang, Yu Huang

18.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Genetic algorithm-based S-curve acceleration and deceleration for five-axis machine tools

Tzyy-Chyang Lu, Shyh-Leh Chen

18.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Multi objective optimization of clinching joints quality using Grey-based Taguchi method

M. Eshtayeh, M. Hrairi

18.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Chatter modeling and stability lobes predicting for non-uniform helix tools

Qiang Guo, Yan Jiang, Bo Zhao, Pingmei Ming

19.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

On the comparison of formability of roll-bonded steel-Cu composite sheet metal in incremental forming and stamping processes

Khalid A. Al-Ghamdi, G. Hussain

19.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

A novel integrated dynamic acceleration/deceleration interpolation algorithm for a CNC controller

Meng-Shiun Tsai, Ying-Che Huang

19.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

A hybrid method for crackless and high-efficiency ultraprecision chamfering of KDP crystal

Dongsheng Chen, Jihong Chen, Baorui Wang

19.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Scanning data reduction and accuracy enhancement through hybrid probing and bicubic surface construction

Ye Li, Yuliang Wei

19.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Comparing the effect of different strategies of continuous improvement programmes on repair time to reduce lead time

Moacir Godinho Filho, Marcel Heimar Ribeiro Utiyama

19.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

NC process reuse-oriented flexible process planning optimization approach for prismatic parts

Changhong Xu, Shusheng Zhang, Rui Huang, Bo Huang, Xiuling Li

19.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Rapid extraction of machined surface data through inverse geometrical solution of tool path information

Lutfi Taner Tunc

20.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Experimental study of lateral pass width in conventional and vibrations-assisted ball burnishing

G. Gomez–Gras, J. A. Travieso–Rodriguez, R. Jerez–Mesa, J. Lluma-Fuentes, B. Gomis de la Calle

20.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

The influence of the growth cavity on damage of welded steel

El-Ahmar Kadi, Benguediab Mohamed

20.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Surface integrity of grinding-assisted chemical etching (GACE)

Pooya Bahrami, Abdolhamid Azizi

22.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Structural and properties of Zn-Al2O3-SiC nano-composite coatings by direct electrolytic process

O. S. I. Fayomi, A. P. I. Popoola, O. E. Olorunniwo

22.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Finite element analysis of surface milling of carbon fiber-reinforced composites

Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun

23.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

The electrical discharge machining process aided by abrasive jet

Luciano José Arantes, Ernane Rodrigues da Silva, Rogério Felício dos Santos, Wisley Falco Sales, Alberto Arnaldo Raslan

23.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Improving the efficiency of solid-based NC simulation by using spatial decomposition methods

Ying Miao, Xiaowen Song, Tao Jin, Yan Shan

23.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

The identification of abrasive grains in the decohesion process by acoustic emission signal patterns

Paweł Sutowski, Krzysztof Nadolny

23.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Recurrence quantification analysis to estimating surface roughness in finish turning processes

Sagar Kamarthi, Sivarit Sultornsanee, Abe Zeid

23.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Wear behaviour of DMD-generated high-strength steels using multi-factor experiment design on a pin-on-disc apparatus

Syed H. Riza, S. H. Masood, Cuie Wen

23.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Review on the influence of process parameters in incremental sheet forming

Shakir Gatea, Hengan Ou, Graham McCartney

23.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

The effect of wear phenomena of grinding wheels with sol-gel alumina on chip formation during internal cylindrical plunge grinding of 100Cr6 steel

Krzysztof Nadolny, Wojciech Kapłonek

24.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Powder bed generation in integrated modelling of additive layer manufacturing of orthopaedic implants

Michal Krzyzanowski, Dmytro Svyetlichnyy, Grace Stevenson, W. Mark Rainforth

24.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Tracking and height control in plasma robotic welding using digital CCD camera

Weixi Wang, Satoshi Yamane, Hikaru Suzuki, Jiro Toma, Kazumichi Hosoya, Toru Nakajima, Hikaru Yamamoto

24.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Flow stress models for deformation under varying condition—finite element method simulation

Dmytro Svyetlichnyy, Jarosław Nowak, Nikolay Biba, Łukasz Łach

24.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

A decision support methodology for embodiment design and process chain selection for hybrid manufacturing platforms

Andrew Gleadall, Nikola Vladov, Joel Segal, Svetan Ratchev, Matthias Plasch, Daniel Kimmig, Markus Dickerhof

24.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Image processing as a tool for high-pressure water jet coating removal assessment

A. W. Momber

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Forming appearance control of arc striking and extinguishing area in multi-layer single-pass GMAW-based additive manufacturing

Jun Xiong, Ziqiu Yin, Weihua Zhang

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Punch structure, punch wear and cut profiles of AISI 304 stainless steel sheet blanks manufactured using cryogenically treated AISI D3 tool steel punches

Yusuf Arslan, Ahmet Özdemir

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Parameter optimization of multi-pass multi-layer MIG welded joint for invar alloy

Xiaohong Zhan, Jingtao Liu, Jicheng Chen, Qingyu Peng, Yanhong Wei, Yanqiu Zhao

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Investigation of temperature and residual stresses field of submerged arc welding by finite element method and experiments

M. R. Nezamdost, M. R. Nekouie Esfahani, S. H. Hashemi, S. A. Mirbozorgi

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

A multi-criteria methodology for effectiveness assessment of internal cylindrical grinding process with modified grinding wheels

Krzysztof Nadolny, Abdulkareem Sh. Mahdi Al-Obaidi

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Polishing pressure investigations of robot automatic polishing on curved surfaces

Fengjie Tian, Zhenguo Li, Chong Lv, Guangbao Liu

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

A study on the residual stress during selective laser melting (SLM) of metallic powder

Yang Liu, Yongqiang Yang, Di Wang

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite

Jinyang Xu, Mohamed El Mansori

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Effect of viscosity of viscous medium on formability of Al1060-O sheet in viscous pressure forming (VPF): an experimental study

Peng-yi Wang, Wen-zhuo Zhang, Zhong-jin Wang, Jun Yi

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Automatic fixtureless inspection of non-rigid parts based on filtering registration points

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel

Muhammad Azam, Mirza Jahanzaib, Junaid Ali Abbasi, Musharaf Abbas, Ahmad Wasim, Salman Hussain

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Simplified resubmitted lot inspection from defect counts

Arturo J. Fernández, Carlos J. Pérez-González

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Analysis of De-Laval nozzle designs employed for plasma figuring of surfaces

Nan Yu, Renaud Jourdain, Mustapha Gourma, Paul Shore

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Total production time minimization of a multi-pass milling process via cuckoo optimization algorithm

Mohamed Arezki Mellal, Edward J. Williams

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Manufacturing of nanostructured Ti-6Al-4V alloy via closed-die isothermal multi-axial-temperature forging: microstructure and mechanical properties

Behzad Fallah Ghanbari, Hossein Arabi, S. Mehdi Abbasi, S. Mohammad Ali Boutorabi

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Identification and looping tool path generation for removing residual areas left by pocket roughing

Min Zhou, Guolei Zheng, Shulin Chen

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Experimental investigation of a novel machining strategy for rough turning using variable feed rate

Ali Oral, M. Cemal Cakir, Demet Gonen, A. Deniz Karaoglan

27.02.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

An efficient five-axis machining method of centrifugal impeller based on regional milling

Hong-Zhou Fan, Guang Xi, Wei Wang, Yan-Long Cao

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Chatter reliability of milling system based on first-order second-moment method

Yu Liu, Lin-lin Meng, Kuo Liu, Yi-min Zhang

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks

Lan Zhou, Yinglin Ke, Huiyue Dong, Zupeng Chen, Kaiye Gao

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Normal boundary intersection method based on principal components and Taguchi’s signal-to-noise ratio applied to the multiobjective optimization of 12L14 free machining steel turning process

D. M. D. Costa, T. I. Paula, P. A. P. Silva, A. P. Paiva

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Deformation characteristic of thread and spline synchronous rolling process

Da-Wei Zhang, Sheng-Dun Zhao

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Study on the grain damage characteristics of brazed diamond grinding wheel using a laser in face grinding

Zhibo Yang, Zhen Zhang, RuiYun Yang, Aiju Liu

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy

Zhipeng Pan, Steven Y. Liang, Hamid Garmestani, Donald S. Shih

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Multi-objective optimization of the depth of bead and tearing in electromagnetic tube compression forming

Milad Shabanpour, Alireza Fallahi Arezoodar

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Investigation on the profile of microhole generated by electrochemical micromachining using retracted tip tool

Weidong Liu, Sansan Ao, Yang Li, Zuming Liu, Hui Zhang, Zhen Luo, Hongli Yu

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Actuarial calculation of the squareness errors for ultra-precision micro v-groove machine tools

Huabing Zou, Xindu Chen

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Dynamic simulation of short-circuiting transfer in GMAW based on the “mass-spring” model

Ying Wang, Xiaoqing Lü, Hongyang Jing

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

An independent discharge status detection method and its application in EAM milling

Min Zhang, Qinhe Zhang, Liya Dou, Guang Zhu, Chunjie Dong

01.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Microstructure and tensile properties of dissimilar submerged friction stir welds between HDPE and ABS sheets

Jicheng Gao, Chao Li, Unisha Shilpakar, Yifu Shen

02.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Effect of graphite particles on improving tribological properties Al-16Si-5Ni-5Graphite self-lubricating composite under fully flooded and starved lubrication conditions for transportation applications

Emad Omrani, Afsaneh Dorri Moghadam, Mahmoud Algazzar, Pradeep L. Menezes, Pradeep K. Rohatgi

02.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Analysis of temperature asymmetry of aluminum alloy thick plate during snake hot rolling

Zhang Tao, Wu Yunxin, Gong Hai, Shi Wenze, Jiang Fangmin, Jiang Shaosong

02.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Investigation on generation and features of burn defect in Ti6Al4V milling

Shaochun Sui, Pingfa Feng

02.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Production planning in the presence of remanufactured spare components: an application in the airline industry

Navin Chari, Claver Diallo, Uday Venkatadri, Daoud Aït-Kadi

04.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Structural design of stamping die components using bi-directional evolutionary structural optimization method

Ghasem Azamirad, Behrooz Arezoo

04.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

A study of densification and phase transformations of nanocomposite Cu-Fe prepared by mechanical alloying and consolidation process

M. Azabou, T. Makhlouf, Joan Saurina, Luisa Escoda, J. J. Suñol, M. Khitouni

04.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Design for additive manufacturing based on the axiomatic design method

Konstantinos Salonitis

05.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Experimental study of bowing defects in pre-notched channel section products in the cold roll forming process

Behrooz Shirani Bidabadi, Hassan Moslemi Naeini, Rouhallah Azizi Tafti, H. Barghikar

07.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Research on laser quenching process of 20CrMnMo gears by finite element method and experiment

Y. L. Wang, S. R. Xu, Y. L. Hui

07.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Machine grinding as an alternative method for creating functional surfaces for controlling cell behaviour

Michael Irving, Mark F. Murphy, Mike N. Morgan, Francis Lilley, Paul French, David R. Burton, Peter Moran

07.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Effect of laser ablation parameters on surface improvement of electron beam melted parts

Ashfaq Mohammad, Muneer Khan Mohammed, Abdulrahman M Alahmari

07.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Process analysis and optimization for fracture stress of electron beam welded ultra-thin FeCo-V foils

Hossein Mostaan, Morteza Shamanian, Mehdi Safari

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Influence of ultrasonic vibrations on process performance of electrochemical honing

H. Singh, P. K. Jain

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

The weld formation of self-support friction stir welds for aluminum hollow extrusion

Yongxian Huang, Long Wan, Tifang Huang, Zongliang Lv, Li Zhou, Jicai Feng

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016 Open Access

Comparative analysis of the properties of the nodular cast iron with carbides and the austempered ductile iron with use of the machine learning and the support vector machine

Dorota Wilk-Kolodziejczyk, Krzysztof Regulski, Grzegorz Gumienny

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Improving the structure-property of aluminum alloy friction stir weld by using a non-shoulder-plunge welding tool

H. J. Zhang, M. Wang, Z. Zhu, X. Zhang, T. Yu, G. X. Yang

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Macro characteristics of dissimilar high strength steel resistance spot welding joint

Xiaomin Luo, Jiangwei Ren, Dong Li, Youqiong Qin, Peiquan Xu

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Material-flow behavior during friction-stir welding of 6082-T6 aluminum alloy

Yongxian Huang, Yaobin Wang, Long Wan, Haoshu Liu, Junjun Shen, Jorge F. dos Santos, Li Zhou, Jicai Feng

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Mathematical modeling of solid-state recycling of aluminum chips

Branimir Lela, Jure Krolo, Sonja Jozić

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Study on laser-MIG hybrid welding characteristics of A7N01-T6 aluminum alloy

Sang Liu, Jianmin Li, Gaoyang Mi, Chunming Wang, Xiyuan Hu

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Analyzing the performance of artificial neural network (ANN)-, fuzzy logic (FL)-, and least square (LS)-based models for online tool condition monitoring

Aydin Salimiasl, Ahmet Özdemir

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Research on flattening behavior of wrinkled 5A02 aluminum alloy tubes under internal pressure

Xiao-Song Wang, Xiao-Lei Cui, S. J. Yuan

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Effect of the lubrication between the tube and the die on the corner filling when hydroforming of different cross-sectional shapes

Abir Abdelkefi, Noamen Guermazi, Nathalie Boudeau, Pierrick Malécot, Nader Haddar

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Exploiting neural PCA and Fisher discriminate analysis for FDI system

Hanen Chaouch, Khaled Ouni, Lotfi Nabli

09.03.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2016

Modeling and experimental study on the force of micro-milling titanium alloy based on tool runout

Guo Li, Da Qu, Wei Wei Feng, Bo Wang, Na Li

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise