Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 5-8/2013

Ausgabe 5-8/2013

Inhaltsverzeichnis ( 80 Artikel )

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A generalized measure of bullwhip effect in supply chain with ARMA demand process under various replenishment policies

Susmita Bandyopadhyay, Ranjan Bhattacharya

01.09.2013 | Original Article | Ausgabe 5-8/2013

A Gough/Stewart-type platform under a combined scheme of actuation

J. Gallardo-Alvarado, K. A. Camarillo-Gómez, M. A. García-Murillo

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Development of fixed abrasive chemical mechanical polishing process for glass disk substrates

Y. B. Tian, Z. W. Zhong, S. T. Lai, Y. J. Ang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A constraint-based tolerance analysis in a multi-operation single setup and multi-operation multi-setup part–fixture assembly

James N. Asante

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Online detection and measurements of drill wear for the drilling of stainless steel parts

George Liu, Tien-I Liu, Zhiyu Gao

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A roadmap for STEP-NC-enabled interoperable manufacturing

M. Hardwick, Y. F. Zhao, F. M. Proctor, A. Nassehi, Xun Xu, Sid Venkatesh, David Odendahl, Leon Xu, Mikael Hedlind, Magnus Lundgren, Larry Maggiano, David Loffredo, Jochim Fritz, Bengt Olsson, Julio Garrido, Alain Brail

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Prediction of grinding force in microgrinding of ceramic materials by cohesive zone-based finite element method

Jie Feng, Peng Chen, Jun Ni

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Mathematical modeling and verification of pulse electrochemical micromachining of microtools

Abishek B. Kamaraj, M. M. Sundaram

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Experimental analysis of the evolution of the physical properties of pyramidal-shaped metallic replicas made using the MIM process

J. Zhang, M. Sahli, J.-C. Gelin, C. Khan-Malek

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Biaxial behavior of laser welded DP/TRIP steel sheets

Essam Ahmed, Uwe Reisgen, Markus Schleser, Oleg Mokrov

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Wear mechanisms of silicon carbide-whisker-reinforced alumina (Al2O3–SiCw) cutting tools when high-speed machining aged Alloy 718

Volodymyr Bushlya, Jinming Zhou, Pajazit Avdovic, Jan-Eric Ståhl

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Role of multi-wall carbon nanotubes on the main parameters of the electrical discharge machining (EDM) process

M. Mohammadzadeh Sari, M. Y. Noordin, E. Brusa

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material

Joaquim Ciurana, Luis Hernandez, Jordi Delgado

01.09.2013 | Original Article | Ausgabe 5-8/2013

Optimal milling conditions for carbon/epoxy composite material using damage and vibration analysis

H. Chibane, A. Morandeau, R. Serra, A. Bouchou, R. Leroy

01.09.2013 | Original Article | Ausgabe 5-8/2013

An industrial vision system for surface quality inspection of transparent parts

S. Satorres Martínez, J. Gómez Ortega, J. Gámez García, A. Sánchez García, E. Estévez Estévez

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Effect of second current pulse and different algorithms on simulation accuracy for electromagnetic sheet forming

Xiaohui Cui, Jianhua Mo, Jianjun Li, Liang Huang, Ying Zhu, Z. W. Li, K. Zhong

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A study on the enhancement of printing location accuracy in a roll-to-roll gravure offset printing system

Jae-Ho Noh, Inyoung Kim, Sang Ho Park, Jeongdai Jo, Dong Soo Kim, Taik-Min Lee

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

An energy-based surface flattening method for flat pattern development of sheet metal components

Qiaosheng Liu, Juntong Xi, Zhuoqi Wu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Prediction of cutting force in ball-end milling of sculptured surface using improved Z-map

Z. C. Wei, M. J. Wang, Y. J. Cai, S. F. Wang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Interfacial microstructure and fracture behavior of laser welded–brazed Mg alloys to Zn-coated steel

C. W. Tan, L. Q. Li, Y. B. Chen, C. X. Mei, W. Guo

01.09.2013 | Original Article | Ausgabe 5-8/2013

Organizing the nozzle magazine of a gantry-type PCB assembly machine

Timo Knuutila, Tomi Suomi, Stefan Emet, Mika Johnsson, Olli S. Nevalainen

01.09.2013 | Original Article | Ausgabe 5-8/2013

A computer-integrated evaluation for supply chain alliance in a bidding environment

Lu Gan, Jiuping Xu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A novel five-axis rough machining method for efficient manufacturing of centrifugal impeller with free-form blades

Hong-Zhou Fan, Wei Wang, Guang Xi

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Experimental and theoretical research on critical characteristics for adiabatic shear localization fracture in high-speed machining

Gu Liyao, Wang Minjie

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Global uncut regions removal for efficient contour-parallel milling

Zhiwei Lin, Jianzhong Fu, Hongyao Shen, Wenfeng Gan

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Microstructure and process characterization of laser-cold metal transfer hybrid welding of AA6061 aluminum alloy

C. Zhang, G. Li, M. Gao, J. Yan, X. Y. Zeng

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Joining interface and grain fracture of single-layer brazed grinding wheels with binderless CBN grains

W. F. Ding, Q. Miao, J. H. Xu, C. Y. Ma, B. Zhao, C. Y. Yang

01.09.2013 | Original Article | Ausgabe 5-8/2013

Experimental investigation and simulation of heat flux into metallic surfaces due to single discharges in micro-electrochemical arc machining (micro-ECAM)

Harry Krötz, Raoul Roth, Konrad Wegener

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A numerical model for optical glass cutting based on SPH method

Xiaoguang Guo, Yanjun Wei, Zhuji Jin, Dongming Guo, Wang Maosen

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Manufacture of magnesium alloy screws

Yeong-Maw Hwang, Kai-Neng Hwang, Chia-Yu Chang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Experimental research on the effects of cavity surface temperature on surface appearance properties of the moulded part in rapid heat cycle moulding process

Guilong Wang, Guoqun Zhao, Xiaoxin Wang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Dieless drawing of stainless steel tubes

Yeong-Maw Hwang, Tsung-Yu Kuo

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A novel genetic algorithm for flexible job shop scheduling problems with machine disruptions

Yong Ming Wang, Hong Li Yin, Kai Da Qin

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A heuristic for no-wait flow shop scheduling

Sagar U. Sapkal, Dipak Laha

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Numerical study of the friction effects on the metal flow under local loading way

Da-Wei Zhang, He Yang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Effects of welding positions on droplet transfer in CO2 laser–MAG hybrid welding

Y. B. Chen, J. C. Feng, L. Q. Li, Y. Li, S. Chang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Study of seamless tube extrusion of SiCp-reinforced AZ61 magnesium alloy composites

Yeong-Maw Hwang, Song-Jeng Huang, Yu-San Huang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A3 thinking approach to support knowledge-driven design

N. Mohd Saad, A. Al-Ashaab, M. Maksimovic, L. Zhu, E. Shehab, P. Ewers, A. Kassam

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A semi-automatic mold cost estimation framework based upon geometry similarity

Cyrus Hillsman, Yan Wang, Dima Nazzal

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Solving the economic lot and delivery scheduling problem in a flexible job shop with unrelated parallel machines and a shelf life by a proposed hybrid PSO

S. Dousthaghi, R. Tavakkoli-Moghaddam, A. Makui

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A comparative study of high-speed machining of Ti-6Al-4V and Inconel 718—part II: Effect of dynamic tool edge wear on cutting vibrations

N. Fang, P. Srinivasa Pai, N. Edwards

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Approach for modeling accurate undeformed chip thickness in milling operation

Ge Song, Jianfeng Li, Jie Sun

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Multi-objective optimization for high recyclability material selection using genetic algorithm

Novita Sakundarini, Zahari Taha, Salwa Hanim Abdul-Rashid, Raja Ariffin Ghazilla, Julirose Gonzales

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Forecasting and optimization of service level in vague and complex SCM by a flexible neural network–fuzzy mathematical programming approach

A. Azadeh, M. Sheikhalishahi, S. M. Asadzadeh, M. Saberi, A. E. Pirayesh Neghab

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Intelligent modeling using fuzzy rule-based technique for evaluating wood carbonization process parameters

H. Vafaeenezhad, S. M. Zebarjad, J. Vahdati Khaki

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Interfacial characterization of T3 copper/35CrMnSi steel dissimilar metal joints by inertia radial friction welding

Ying Wang, Jian Luo, Xiaoming Wang, Xiaoling Xu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Agility appraisal for integrated supply chain using generalized trapezoidal fuzzy numbers set

Chitrasen Samantra, Saurav Datta, Swagatika Mishra, Siba Sankar Mahapatra

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Effects of process parameters on wrinkling of thin-walled circular tube under rotary draw bending

Jisheng Chen, Daxin E, Jingwen Zhang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A method for thermal performance modeling and simulation of machine tools

Jianfu Zhang, Pingfa Feng, Chuang Chen, Dingwen Yu, Zhijun Wu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

An effective shuffled frog-leaping algorithm for hybrid flow-shop scheduling with multiprocessor tasks

Ye Xu, Ling Wang, Min Liu, Sheng-yao Wang

01.09.2013 | Original Article | Ausgabe 5-8/2013

Consumable double electrode with a single arc GMAW

H. L. Wei, H. Li, L. J. Yang, Y. Gao

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Analysis and avoidance of flow-induced defects in meso-forming process: simulation and experiment

J. L. Wang, M. W. Fu, J. Q. Ran

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Improving machining accuracy of electrochemical machining blade by optimization of cathode feeding directions

N. S. Qu, Z. Y. Xu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Damage of the machined surface and subsurface in orthogonal milling of FGH95 superalloy

Du Jin, Zhanqiang Liu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Hybrid flexible flowshop scheduling problem with unrelated parallel machines and limited waiting times

S. F. Attar, M. Mohammadi, R. Tavakkoli-Moghaddam

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Evaluating of cutting forces in thread machining

Hamza K. Akyildiz

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Nontraditional machining processes selection using evaluation of mixed data method

Prasenjit Chatterjee, Shankar Chakraborty

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

An efficient algorithm for press line optimisation

Bo Svensson, Fredrik Danielsson, Bengt Lennartson

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Applying lean techniques to nougat fabrication: a seasonal case study

Martín Tanco, Javier Santos, Jose Luis Rodriguez, Juan Reich

01.09.2013 | Original Article | Ausgabe 5-8/2013

An online quality assessment framework for automated welding processes

H. Fronthaler, G. Croonen, J. Biber, M. Heber, M. Rüther

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A non-greedy systematic neighbourhood search heuristic for solving facility layout problem

Rajesh Matai, S. P. Singh, M. L. Mittal

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

An integrated stochastic-fuzzy modeling approach for supply chain leanness evaluation

Farzad Behrouzi, Kuan Yew Wong

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Electrode feed path planning for multi-axis EDM of integral shrouded impeller

Xiao Liu, Xiaoming Kang, Xuecheng Xi, Wei Liang, Wansheng Zhao

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Transient dynamics simulation of the electrical discharge-generated bubble in sinking EDM

Yanzhen Zhang, Yonghong Liu, Renjie Ji, Cao Zheng, Yang Shen, Xiaolong Wang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Review of diamond-cutting ferrous metals

Z. J. Li, F. Z. Fang, Hu Gong, X. D. Zhang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Optimization of sequential subdivision of depth of cut in turning operations using dynamic programming

Kaibo Lu, Minqing Jing, Xiaoli Zhang, Heng Liu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Flow-induced morphology evolution of uniformly miniaturized high-density polyethylene parts prepared by micro-injection molding

Can Yang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Research on material removal rate of powder mixed near dry electrical discharge machining

Xue Bai, Qin-He Zhang, Ting-Yi Yang, Jian-Hua Zhang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A CNC program module based on polar coordinate system

D. L. Zhang, X. S. Chen, R. Du

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Verification of a characterization method of the laser-induced selective activation based on industrial lasers

Yang Zhang, Hans Nørgaard Hansen, Peter Torben Tang, Jakob Skov Nielsen

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Improvement in robustness and computational efficiency of material models for finite element analysis of metal powder compaction and experimental validation

Hossein Kashani Zadeh, Jack Jeswiet, Il Yong Kim

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Aluminium can shaping by hydroforming: simulative feasibility study and prototype production

E. Ceretti, A. Attanasio, A. Fiorentino, L. Giorleo, C. Giardini

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Dissimilar autogenous disk-laser welding of Haynes 188 and Inconel 718 superalloys for aerospace applications

Fabrizia Caiazzo, Vittorio Alfieri, Vincenzo Sergi, Angelo Schipani, Salvatore Cinque

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A new surface joining technique for the design of shoe lasts

Francisco Javier Amorós-González, Antonio Jimeno-Morenilla, Faustino Salas-Pérez

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A comparative study of high-speed machining of Ti–6Al–4V and Inconel 718 - part I: effect of dynamic tool edge wear on cutting forces

N. Fang, P. Srinivasa Pai, N. Edwards

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Decision models of closed-loop supply chain with remanufacturing under hybrid dual-channel collection

Xianpei Hong, Zongjun Wang, Dezhi Wang, Huaige Zhang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Experimental study on the effect of dies on wall thickness distribution in NC bending of thin-walled rectangular 3A21 aluminum alloy tube

Kuanxin Liu, Yuli Liu, He Yang

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

A special purpose multi-criteria heuristic function for a single machine scheduling problem with forward dynamic programming

Guzin Ozdagoglu, Sabri Erdem, Latif Salum

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Development of an automated structural design system for progressive dies

Bor-Tsuen Lin, Kun-Min Huang, Kuan-Yu Su, Cheng-Yi Hsu

01.09.2013 | ORIGINAL ARTICLE | Ausgabe 5-8/2013

Experimental research of brittle-ductile transition conditions and tool wear for micromilling of glass material

Hai Tao Liu, Ya Zhou Sun, De Bing Shan, Chen Xin Zhang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise