Ausgabe 1-3/2012
Inhalt (43 Artikel)
Editorial
The fracture toughness and properties of thermally modified beech and ash at different moisture contents
Almudena Majano-Majano, Mark Hughes, Jose L. Fernandez-Cabo
Basic properties of woodceramics made from bamboo powder and epoxy resin
Xian-Chun Yu, De-Lin Sun, De-Bin Sun, Zhong-Hai Xu, Xiang-Su Li
Coloring characteristics of in situ lignin during heat treatment
Chen Yao, Fan Yongming, Gao Jianmin, Li Houkun
Nondestructive evaluation of heat-treated Eucalyptus grandis Hill ex Maiden wood using stress wave method
Rosilei A. Garcia, Alexandre Monteiro de Carvalho, João Vicente de Figueiredo Latorraca, Jorge Luis Monteiro de Matos, Wanessa A. Santos, Rafael Fonseca de Medeiros Silva
Properties of oriented strand board made from Betung bamboo (Dendrocalamus asper (Schultes.f) Backer ex Heyne)
Fauzi Febrianto, Sahroni, Wahyu Hidayat, Edi Suhaimi Bakar, Gu-Joong Kwon, Jin-Heon Kwon, Soon-Il Hong, Nam-Hun Kim
Fungal colonisation of outside weathered modified wood
Antje Pfeffer, Patrik J. Hoegger, Ursula Kües, Holger Militz
Compression of wood under saturated steam, superheated steam, and transient conditions at 150°C, 160°C, and 170°C
Andreja Kutnar, Frederick A. Kamke
Steaming effects on selected wood properties of Turkey oak by spectral analysis
Luigi Todaro, Luigi Zuccaro, Mario Marra, Bruno Basso, Antonio Scopa
Novel assessment of casehardening in kiln-dried lumber
Prawate Diawanich, Suchat Tomad, Nirundorn Matan, Buhnnum Kyokong
Toward a process monitoring of CNC wood router. Sensor selection and surface roughness prediction
Piotr Iskra, Roger E. Hernández
Eucalyptus camaldulensis density and fiber length estimated by near-infrared spectroscopy
Tetsuya Inagaki, Manfred Schwanninger, Reina Kato, Yohei Kurata, Warunee Thanapase, Pratuang Puthson, Satoru Tsuchikawa
A common near infrared—based partial least squares regression model for the prediction of wood density of Pinus pinaster and Larix × eurolepis
Ana Alves, Antonio Santos, Philippe Rozenberg, Luc E. Pâques, Jean-Paul Charpentier, Manfred Schwanninger, José Rodrigues
Colour alteration and chemistry changes in oak wood (Quercus pedunculata Ehrh) during plain vacuum drying
Sadoth Sandoval-Torres, Wahbi Jomaa, Françoise Marc, Jean-Rodolphe Puiggali
Nanofibers from bagasse and rice straw: process optimization and properties
Mohammad L. Hassan, Aji P. Mathew, Enas A. Hassan, Nahla A. El-Wakil, Kristiina Oksman
Liquid water absorption in dried Norway spruce timber measured with CT scanning and viewed as a percolation process
Karin Sandberg, Jarl-Gunnar Salin
Removal of cadmium (II) from aqueous solutions by adsorption using meranti wood
Mohd Rafatullah, Othman Sulaiman, Rokiah Hashim, Anees Ahmad
Adhesive penetration in beech wood: experiments
Philipp Hass, Falk K. Wittel, Miller Mendoza, Hans J. Herrmann, Peter Niemz
Investigation on the compatibilizing effect of m-isopropenyl-α,α-dimethylbenzyl isocyanate grafted polypropylene on polypropylene and wood flour composites
Chuigen Guo, Liping Li, Qingwen Wang
Production of hemicellulosic sugars from Pinus pinaster wood by sequential steps of aqueous extraction and acid hydrolysis
M. J. González-Muñoz, Rosana Alvarez, Valentín Santos, J. C. Parajó
Within-tree variations in the surface free energy of wood assessed by contact angle analysis
Davide Rossi, Sergio Rossi, Hubert Morin, Antonio Bettero
Chemical modification of simul wood with styrene–acrylonitrile copolymer and organically modified nanoclay
R. R. Devi, T. K. Maji
Studies on the nanostructure of the cell wall of bamboo using X-ray scattering
Yurong Wang, Kirsi Leppänen, Seppo Andersson, Ritva Serimaa, Haiqing Ren, Benhua Fei
Capacity prediction of welded timber joints
Till Vallée, Thomas Tannert, Christelle Ganne-Chedville
Control by ATR-FTIR of surface treatment of cork stoppers and its effect on their mechanical performance
Jose R. Gonzalez-Adrados, Maria C. Garcia-Vallejo, Maria J. Caceres-Esteban, Jose L. Garcia de Ceca, Florentino Gonzalez-Hernandez, Rosa Calvo-Haro
Duration-of-load and creep effects in strand-based wood composite: experimental research
Jasmine B. Wang, Frank Lam, Ricardo O. Foschi
Duration-of-load and creep effects in strand-based wood composite: a creep-rupture model
Jasmine B. Wang, Ricardo O. Foschi, Frank Lam
Bamboo nanofiber preparation by HCW and grinding treatment and its application for nanocomposite
Fuxiang Chang, Seung-Hwan Lee, Keisuke Toba, Asahiro Nagatani, Takashi Endo
Moisture diffusion coefficient of reaction woods: compression wood of Picea abies L. and tension wood of Fagus sylvatica L.
Asghar Tarmian, Romain Remond, Hadi Dashti, Patrick Perré
Effect of wood species on thermal flow behavior and physical properties of thermoplastic moldings
Isoko Takahashi, Takanori Sugimoto, Yasuo Takasu, Mariko Yamasaki, Yasutoshi Sasaki, Youji Kikata
Effect of conditioning on distribution and availability of alkaline copper quat (ACQ) preservative components in earlywood and latewood of southern pine
G. Zhou, Z. Huang, P. A. Cooper
Extraction of antioxidants from eucalyptus (Eucalyptus globulus) bark
Gonzalo Vázquez, Jorge Santos, M. Sonia Freire, Gervasio Antorrena, Julia González-Álvarez
Origin of the acetylated structures present in white birch (Betula pendula Roth) milled wood lignin
Jorge Rencoret, José C. del Río, Ana Gutiérrez, Ángel T. Martínez, Shiming Li, Jim Parkås, Knut Lundquist
Two-level system dynamical coarse-graining of annual rings
Anteneh Tesfaye Tekleyohannes, Stavros Avramidis
Physical properties and termite durability of maritime pine Pinus pinaster Ait., heat-treated under vacuum pressure
Thibaud Surini, Fatima Charrier, Jérôme Malvestio, Bertrand Charrier, Amine Moubarik, Patrick Castéra, Stéphane Grelier
Probabilistic strength prediction of adhesively bonded timber joints
Thomas Tannert, Till Vallée, Simon Hehl
Study on biopretreatment of lignin by white-rot fungi for enhancing pyrolysis in inert atmosphere
Xuewei Yang, Xiaoyu Zhang, Shulin Chen
Adhesive penetration of hardwood: a generic penetration model
Miller Mendoza, Philipp Hass, Falk K. Wittel, Peter Niemz, Hans J. Herrmann
Acoustic tomography in relation to 2D ultrasonic velocity and hardness mappings
Li Li, Xiping Wang, Lihai Wang, R. Bruce Allison
Influence of combined hydro-thermal treatments on selected properties of Turkey oak (Quercus cerris L.) wood
Luigi Todaro, Roberto Zanuttini, Antonio Scopa, Nicola Moretti
Experimental and numerical investigations on adhesively bonded timber joints
Thomas Tannert, Till Vallée, Simon Hehl