Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2022 | OriginalPaper | Buchkapitel

Hydrogen Direct Reduced Iron

verfasst von: Pasquale Cavaliere

Erschienen in: Hydrogen Assisted Direct Reduction of Iron Oxides

Verlag: Springer International Publishing

share
TEILEN

Abstract

Direct reduced iron is considered the primary actor in the transition to a sustainable steelmaking route. In this chapter, all the developed direct reduced iron routes are described. The basic fundamentals, related to gas direct reduction, are analyzed. In order to produce carbon-free steel, hydrogen is fundamental. The iron ores reduction through hydrogen and the various available technology solutions are described. The fundamental kinetics and thermodynamic limits solutions of the various technological solutions are underlined. These issues related to different reducing gases compositions are analyzed. The advantages related to the employment of direct reduced iron in the blast furnace are evaluated. The problematics related to the direct reduced iron handling and usage are described. Electricity and energy issues are largely described. The new route of green hydrogen produced to reduce iron oxides finds large attention in the chapter. The energetic issues related to hydrogen produced via hot or cold water electrolysis are analyzed. The technological issues related to the employment of direct reduced iron in the electric arc furnaces are described. Also, the innovative DRI-open bath slag furnaces are presented.
Literatur
Zurück zum Zitat Abel M, Hein M, Böhm C, Sterrer W, Vaillancourt D (2014) Solutions for the increased usage of DRI in the electric arc furnace. AISTech - Iron and Steel Technology Conference Proceedings pp. 997–1006. Abel M, Hein M, Böhm C, Sterrer W, Vaillancourt D (2014) Solutions for the increased usage of DRI in the electric arc furnace. AISTech - Iron and Steel Technology Conference Proceedings pp. 997–1006.
Zurück zum Zitat Berger H (2017) Development ways of the iron and steel industry. Chernye Metally 5:71–76. Berger H (2017) Development ways of the iron and steel industry. Chernye Metally 5:71–76.
Zurück zum Zitat Bolen J (2017) Historical operating cost comparison for North American iron and steelmaking routes. In: AISTech—iron and steel technology conference proceedings, pp 1027–1034 Bolen J (2017) Historical operating cost comparison for North American iron and steelmaking routes. In: AISTech—iron and steel technology conference proceedings, pp 1027–1034
Zurück zum Zitat Carpenter AM (2004) Use of coal in direct ironmaking processes. CCC/88. IEA Clean Coal Centre, London Carpenter AM (2004) Use of coal in direct ironmaking processes. CCC/88. IEA Clean Coal Centre, London
Zurück zum Zitat Chevrier V (2018) Midrex H2 TM: Ultimate low-CO2 ironmaking and its place in the new hydrogen economy. In: AISTech—iron and steel technology conference proceedings, pp 725–729 Chevrier V (2018) Midrex H2 TM: Ultimate low-CO2 ironmaking and its place in the new hydrogen economy. In: AISTech—iron and steel technology conference proceedings, pp 725–729
Zurück zum Zitat Deloitte (2013) Lower-cost natural gas and its impacts Deloitte (2013) Lower-cost natural gas and its impacts
Zurück zum Zitat Duarte P, Martinez J (2017) Improving performances and decreasing CO2 emissions in blast furnaces installations with high-carbon DRI/HBI. In: AISTech—iron and steel technology conference proceedings, pp 815–824 Duarte P, Martinez J (2017) Improving performances and decreasing CO2 emissions in blast furnaces installations with high-carbon DRI/HBI. In: AISTech—iron and steel technology conference proceedings, pp 815–824
Zurück zum Zitat Gautam V, Shifrin V (2018) Reduction in chemical energy costs for EAF steelmaking. In: AISTech—iron and steel technology conference proceedings, pp 883–892 Gautam V, Shifrin V (2018) Reduction in chemical energy costs for EAF steelmaking. In: AISTech—iron and steel technology conference proceedings, pp 883–892
Zurück zum Zitat Hölling M, Weng M, Geliert S (2017) Evaluation of hydrogen-based production of DRI. Stahl und Eisen 137:47–54 Hölling M, Weng M, Geliert S (2017) Evaluation of hydrogen-based production of DRI. Stahl und Eisen 137:47–54
Zurück zum Zitat Hölling M, Weng M, Gellert S (2018) Analysis of sponge iron production with H2. Chernye Metally 3(1):6–11 Hölling M, Weng M, Gellert S (2018) Analysis of sponge iron production with H2. Chernye Metally 3(1):6–11
Zurück zum Zitat HYBRIT (2018) Slutrapport. HYBRIT—Hydrogen Breakthrough Ironmaking Technology HYBRIT (2018) Slutrapport. HYBRIT—Hydrogen Breakthrough Ironmaking Technology
Zurück zum Zitat K1-MET (2018) Energy in future steelmaking. European steel: the wind of change Bruxelles,. 31 Jan 2018 K1-MET (2018) Energy in future steelmaking. European steel: the wind of change Bruxelles,. 31 Jan 2018
Zurück zum Zitat Komusanac, I, Daniel F, Guy B (2019) Wind energy in Europe in 2018—trends and statistics. Wind Europe Komusanac, I, Daniel F, Guy B (2019) Wind energy in Europe in 2018—trends and statistics. Wind Europe
Zurück zum Zitat Midrex (2017, 2017) Direct from Midrex third quarter Midrex (2017, 2017) Direct from Midrex third quarter
Zurück zum Zitat Mohseni F (2019) Electrolysis and influence on energy system Mohseni F (2019) Electrolysis and influence on energy system
Zurück zum Zitat Mohsenzadeh FM, Payab H, Abdoli MA, Abedi Z (2018) An environmental study on persian direct reduction (PERED ®) technology: comparing capital cost and energy saving with MIDREX ® technology. Ekoloji 27:959–967 Mohsenzadeh FM, Payab H, Abdoli MA, Abedi Z (2018) An environmental study on persian direct reduction (PERED ®) technology: comparing capital cost and energy saving with MIDREX ® technology. Ekoloji 27:959–967
Zurück zum Zitat Muller N, Herz G, Reichelt E, Jahn M (2018) CO2 emission reduction potential in the steel industry by integration of a direct reduction process into existing steel mills. In: Challenges for petrochemicals and fuels: integration of value chains and energy transition DGMK conference, Berlin, Germany, 10–12 Oct 2018 Muller N, Herz G, Reichelt E, Jahn M (2018) CO2 emission reduction potential in the steel industry by integration of a direct reduction process into existing steel mills. In: Challenges for petrochemicals and fuels: integration of value chains and energy transition DGMK conference, Berlin, Germany, 10–12 Oct 2018
Zurück zum Zitat Poveromo J (2020) Raw Materials and Ironmaking Global consulting, Outlook for DR grade pellet supply for DRI shaft furnace processes, STI Webinar, 21 Oct Poveromo J (2020) Raw Materials and Ironmaking Global consulting, Outlook for DR grade pellet supply for DRI shaft furnace processes, STI Webinar, 21 Oct
Zurück zum Zitat Poveromo JJ, Rorick FC (2012) Developments in north American iron ore & ironmaking. In: 6th int. congress on the science and technology of ironmaking 2012, ICSTI 2012—including proceedings from the 42nd ironmaking and raw materials seminar, and the 13th Brazilian symp. on iron ore, vol 1, pp 597–608 Poveromo JJ, Rorick FC (2012) Developments in north American iron ore & ironmaking. In: 6th int. congress on the science and technology of ironmaking 2012, ICSTI 2012—including proceedings from the 42nd ironmaking and raw materials seminar, and the 13th Brazilian symp. on iron ore, vol 1, pp 597–608
Zurück zum Zitat Prammer J (2019) The actual problems of current decarbonization. Chernye Metally 1:55–59 Prammer J (2019) The actual problems of current decarbonization. Chernye Metally 1:55–59
Zurück zum Zitat Raymond L, Leiv K (2008) Iron ore reduction with CO and H2 gas mixtures—thermodynamic and kinetic modelling. In: Proceedings of the fourth Ulcos seminar, 1 and 2 Oct Raymond L, Leiv K (2008) Iron ore reduction with CO and H2 gas mixtures—thermodynamic and kinetic modelling. In: Proceedings of the fourth Ulcos seminar, 1 and 2 Oct
Zurück zum Zitat Rehnholm T (2019) Energy system dynamics; flexibility, electrolysis, storage Rehnholm T (2019) Energy system dynamics; flexibility, electrolysis, storage
Zurück zum Zitat Schenck J, Lüngen HB (2017) Review of application of DRI processes in EC countries. Chernye Metally 2:25–31 Schenck J, Lüngen HB (2017) Review of application of DRI processes in EC countries. Chernye Metally 2:25–31
Zurück zum Zitat Skorianz M, Engel E, Schenk J (2020) Sustainable steelmaking—a strategic evaluation of the future potential of hydrogen in the steel industry. Millennium Steel 2020:26–32 Skorianz M, Engel E, Schenk J (2020) Sustainable steelmaking—a strategic evaluation of the future potential of hydrogen in the steel industry. Millennium Steel 2020:26–32
Zurück zum Zitat Stagnoli P (2020) Ironmaking reinvented. Direct from TENOVA Stagnoli P (2020) Ironmaking reinvented. Direct from TENOVA
Zurück zum Zitat Tanaka H (2013) Potential for CO2 emissions reduction in Midrex direct reduction process. Kobelco, 6 Nov 2013 Tanaka H (2013) Potential for CO2 emissions reduction in Midrex direct reduction process. Kobelco, 6 Nov 2013
Metadaten
Titel
Hydrogen Direct Reduced Iron
verfasst von
Pasquale Cavaliere
Copyright-Jahr
2022
DOI
https://doi.org/10.1007/978-3-030-98056-6_7

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.