nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Statistical Approach to the Cellulose Nanocrystal Tribological Behavior on the Piston Liner Contact Using Full Factorial Design (FFD)

verfasst von : N. W. Awang, Sakinah Hisham, D. Ramasamy, K. Kadirgama, Mohd Kamal Kamarulzaman

Erschienen in: Proceedings of the 2nd Energy Security and Chemical Engineering Congress

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The primary goal of this research is to investigate the effect of tribo-test parameters on the coefficient of friction (COF) and wear rate of the cylinder liner and piston ring pair. The tribological studies are carried out utilizing a full factorial design (FFD) experimental scheme. Sliding speed, temperature, volume concentration, and applied force were all evaluated as important parameters that determine tribological qualities. The effects of various variables and their interactions on the dependent variables were investigated. The ANOVA analysis demonstrates that the applied load could be the most influential factor affecting the minimum amount of the friction coefficient. The minimum quantity of wear rate indicates that as the sliding speed increases, the wear rate decreases.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Fabrication of Superhydrophobic on Ti6Al4V by Using the Hybrid Process of Nanosecond Laser Texturing

Nächstes Kapitel Covid-19 Embedded with Aerosol Particles Travel Simulation Inside a Mosque

Kapsiz M, Durat M, Ficici F (2011) Friction and wear studies between cylinder liner and piston ring pair using Taguchi design method. Adv Eng Softw 42(8):595–603CrossRef

Ali MKA, Xianjun H, Mai L, Qingping C, Turkson RF, Bicheng C (2016) Improving the tribological characteristics of piston ring assembly in automotive engines using Al₂O₃ and TiO₂ nanomaterials as nano-lubricant additives. Tribol Int 103:540–554CrossRef

Davim JP (2011) Tribology for engineers: a practical guide. Elsevier, Amsterdam

Arumugam S, Sriram G (2012) Effect of bio-lubricant and biodiesel-contaminated lubricant on tribological behavior of cylinder liner–piston ring combination. Tribol Trans 55(4):438–445CrossRef

Nadooshan AA, Esfe MH, Afrand M (2017) Evaluation of rheological behavior of 10W40 lubricant containing hybrid nano-material by measuring dynamic viscosity. Physica E 92:47–54CrossRef

Esfe MH, Saedodin S, Rejvani M, Shahram J (2017) Experimental investigation, model development and sensitivity analysis of rheological behavior of ZnO/10W40 nano-lubricants for automotive applications. Physica E 90:194–203CrossRef

Wu H, Zhao J, Xia W, Cheng X, He A, Yun JH, Wang L, Huang H, Jiao S, Huang L (2017) A study of the tribological behaviour of TiO₂ nano-additive water-based lubricants. Tribol Int 109:398–408CrossRef

Wu H, Zhao J, Xia W, Cheng X, He A, Yun JH, Wang L, Huang H, Jiao S, Huang L (2017) Analysis of TiO₂ nano-additive water-based lubricants in hot rolling of microalloyed steel. J Manuf Process 27:26–36CrossRef

Hisham S, Kadirgama K, Ramasamy D, Noor M, Amirruddin A, Najafi G, Rahman M (2017) Waste cooking oil blended with the engine oil for reduction of friction and wear on piston skirt. Fuel 205:247–261CrossRef

10.

Wu H, Wang L, Johnson B, Yang S, Zhang J, Dong G (2018) Investigation on the lubrication advantages of MoS2 nanosheets compared with ZDDP using block-on-ring tests. Wear 394:40–49CrossRef

11.

Kakaš D, Škorić B, Mitrović S, Babić M, Terek P, Miletić A, Vilotić M (2009) Influence of load and sliding speed on friction coefficient of IBAD deposited TiN. Tribol Ind 31(3–4):3–10

12.

Kasdekar DK, Parashar V (2018) Principal component analysis to optimize the ECM parameters of aluminium alloy. Mater Today Proc 5(2):5398–5406CrossRef

13.

Soundararajan R, Ramesh A, Sivasankaran S, Vignesh M (2017) Modeling and analysis of mechanical properties of aluminium alloy (A413) reinforced with boron carbide (B4C) processed through squeeze casting process using artificial neural network model and statistical technique. Mater Today Proc 4(2):2008–2030CrossRef

14.

Sunil B, Rajeev V, Jose S (2018) A statistical study on the dry wear and friction characteristics of Al-12.6Si-3Cu-(2–2.6 wt.%)Ni piston alloys. Mater Today Proc 5(1):1131–1137

15.

Kamarulzaman MK, Abdullah A (2020) Multi-objective optimization of diesel engine performances and exhaust emissions characteristics of Hermetia illucens larvae oil-diesel fuel blends using response surface methodology. Energy Sources Part A Recovery Utilization Environ Effects 1–14

16.

Ridzuan N, Adam F, Yaacob Z (2016) Screening of factor influencing wax deposition using full factorial experimental design. Pet Sci Technol 34(1):84–90CrossRef

17.

Asnida M, Hisham S, Awang N, Amirruddin A, Noor M, Kadirgama K, Ramasamy D, Najafi G, Tarlochan F (2018) Copper (II) oxide nanoparticles as additive in engine oil to increase the durability of piston-liner contact. Fuel 212:656–667CrossRef

Titel: Statistical Approach to the Cellulose Nanocrystal Tribological Behavior on the Piston Liner Contact Using Full Factorial Design (FFD)
verfasst von: N. W. Awang
Sakinah Hisham
D. Ramasamy
K. Kadirgama
Mohd Kamal Kamarulzaman
Verlag: Springer Nature Singapore
Buch: Proceedings of the 2nd Energy Security and Chemical Engineering Congress
Print ISBN: 978-981-19-4424-6

Electronic ISBN: 978-981-19-4425-3

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-981-19-4425-3_31