Skip to main content
Erschienen in: Geotechnical and Geological Engineering 2/2021

12.10.2020 | Original Paper

Statistical Evaluation of CPT and CPTu Based Methods for Prediction of Axial Bearing Capacity of Piles

verfasst von: Parisa Heidari, Mahmoud Ghazavi

Erschienen in: Geotechnical and Geological Engineering | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Piles are structural members made of steel, concrete, or wood installed into the ground to transfer superstructure loads to the soil. Nowadays, many structures are built on poor lands, and therefore piles have crucial roles in such structures. Performing in-situ tests such as cone penetration (CPT) and piezocone penetration tests (CPTu) have always been of great importance in designing piles. These tests have a brilliant consistency with reality, and as a result, the outcome data can be used in order to achieve reliable pile designing models and reduce uncertainty in this regard. In this paper, the capability of various CPT and CPTu based methods developed from 1961 to 2016 has been investigated using four statistical methods. Such CPT and CPTu based methods are adopted for direct prediction of axial bearing capacity of piles using CPT and CPTu field data. For this purpose, 61 sets of field data prepared from CPT and CPTu have been collected. The data sets were utilized in order to calculate the axial bearing capacity of piles (QE) through 25 different methods. In addition, the measured axial pile capacities (QM) have been collected, recorded and prepared from field static load tests, respectively. Then, four different statistical approaches have been applied to assess the accuracy of these methods. Finally, the most reliable and accurate methods are presented.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Anhänge
Nur mit Berechtigung zugänglich
Literatur
Zurück zum Zitat Abu-Farsakh MY, Titi HH (2004) Assessment of direct cone penetration test methods for predicting the ultimate capacity of friction driven piles. J Geotechn Geoenviron Eng 130:935–944CrossRef Abu-Farsakh MY, Titi HH (2004) Assessment of direct cone penetration test methods for predicting the ultimate capacity of friction driven piles. J Geotechn Geoenviron Eng 130:935–944CrossRef
Zurück zum Zitat Albiero J, Sacilotto A, Mantilla J, Teixeira C, Carvalho D (1995) Sucessive load tests on bored piles. In: Proceedings, 1995. Albiero J, Sacilotto A, Mantilla J, Teixeira C, Carvalho D (1995) Sucessive load tests on bored piles. In: Proceedings, 1995.
Zurück zum Zitat Almeida MS, Danziger FA, Lunne T (1996) Use of the piezocone test to predict the axial capacity of driven and jacked piles in clay. Can Geotech J 33:23–41CrossRef Almeida MS, Danziger FA, Lunne T (1996) Use of the piezocone test to predict the axial capacity of driven and jacked piles in clay. Can Geotech J 33:23–41CrossRef
Zurück zum Zitat Alsamman OM (1995) The use of CPT for calculating axial capacity of drilled shafts. University of Illinois at Urbana-Champaign Alsamman OM (1995) The use of CPT for calculating axial capacity of drilled shafts. University of Illinois at Urbana-Champaign
Zurück zum Zitat Altaee A, Evgin E, Fellenius BH (1992a) Axial load transfer for piles in sand. II Numerical analysis. Can Geotech J 29:21–30CrossRef Altaee A, Evgin E, Fellenius BH (1992a) Axial load transfer for piles in sand. II Numerical analysis. Can Geotech J 29:21–30CrossRef
Zurück zum Zitat Altaee A, Fellenius BH, Evgin E (1992b) Axial load transfer for piles in sand. I Tests on an instrumented precast pile. Can Geotech J 29:11–20CrossRef Altaee A, Fellenius BH, Evgin E (1992b) Axial load transfer for piles in sand. I Tests on an instrumented precast pile. Can Geotech J 29:11–20CrossRef
Zurück zum Zitat Amirmojahedi M, Abu-Farsakh M (2019) Evaluation of direct pile-CPT methods for estimating the ultimate capacity of driven piles. In: Geo-Congress 2019: Foundations, 2019. American Society of Civil Engineers Reston, VA, pp 167–177 Amirmojahedi M, Abu-Farsakh M (2019) Evaluation of direct pile-CPT methods for estimating the ultimate capacity of driven piles. In: Geo-Congress 2019: Foundations, 2019. American Society of Civil Engineers Reston, VA, pp 167–177
Zurück zum Zitat Aoki N, Velloso DdA (1975) An approximate method to estimate the bearing capacity of piles. In: Proceedings of 5th Pan-American Conference of Soil Mechanics and Foundation Engineering. International Society of Soil Mechanics and Geotechnical Engineering Buenos …, pp 367–376 Aoki N, Velloso DdA (1975) An approximate method to estimate the bearing capacity of piles. In: Proceedings of 5th Pan-American Conference of Soil Mechanics and Foundation Engineering. International Society of Soil Mechanics and Geotechnical Engineering Buenos …, pp 367–376
Zurück zum Zitat Attar IH, Fakharian K (2013) Influence of soil setup on shaft resistance variations of driven piles: case study. Int J Civ Eng Trans B: Geotech Eng 11:4–5 Attar IH, Fakharian K (2013) Influence of soil setup on shaft resistance variations of driven piles: case study. Int J Civ Eng Trans B: Geotech Eng 11:4–5
Zurück zum Zitat Avasarala S, Davidson J, McVay A (1994) An evaluation of predicted capacity of single piles from SPILE and UNIPILE programs. In: Proceedings of the FHWA International Conference on Design and Construction of Deep Foundations, Orlando, Fla, 1994. pp 712–723 Avasarala S, Davidson J, McVay A (1994) An evaluation of predicted capacity of single piles from SPILE and UNIPILE programs. In: Proceedings of the FHWA International Conference on Design and Construction of Deep Foundations, Orlando, Fla, 1994. pp 712–723
Zurück zum Zitat Axelsson G (1998) Long-term increase in shaft capacity of driven piles in sand. International Conference on Case Histories in Geotechnical Engineering, University of Missouri—Rolla-57 Axelsson G (1998) Long-term increase in shaft capacity of driven piles in sand. International Conference on Case Histories in Geotechnical Engineering, University of Missouri—Rolla-57
Zurück zum Zitat Begemann HP (1963) The use of the static soil penetrometer in Holland. NZ Eng 18:41 Begemann HP (1963) The use of the static soil penetrometer in Holland. NZ Eng 18:41
Zurück zum Zitat Begemann H (1965) The maximum pulling force on a single tension pile calculated on the basis of results of the adhesion jacket cone. In: Proceedings of the 6th International Conference on Soil Mechanics and Foundation Engineering, Montreal, pp 229–233 Begemann H (1965) The maximum pulling force on a single tension pile calculated on the basis of results of the adhesion jacket cone. In: Proceedings of the 6th International Conference on Soil Mechanics and Foundation Engineering, Montreal, pp 229–233
Zurück zum Zitat Begemann H (1969) The dutch static penetration test with the adhesion jacket cone. Chapter III Tension Piles.. LGM Mededelingen, Delft Begemann H (1969) The dutch static penetration test with the adhesion jacket cone. Chapter III Tension Piles.. LGM Mededelingen, Delft
Zurück zum Zitat Bogdanovic L (1961) The use of penetration tests for determining the bearing capacity of piles. In: Proceedings of the 5th International Conference on Soil Mechanics and Foundation Engineering, Paris Bogdanovic L (1961) The use of penetration tests for determining the bearing capacity of piles. In: Proceedings of the 5th International Conference on Soil Mechanics and Foundation Engineering, Paris
Zurück zum Zitat Briaud J (1988) Evaluation of cone penetration test methods using 98 pile load tests. In: Proceedings of the 1st International Symposium on Penetration Testing, pp 687–697 Briaud J (1988) Evaluation of cone penetration test methods using 98 pile load tests. In: Proceedings of the 1st International Symposium on Penetration Testing, pp 687–697
Zurück zum Zitat Briaud J-L, Moore BH, Mitchell GB (1989) Analysis of pile load tests at Lock and Dam 26. In: Foundation engineering: Current Principles and Practices. ASCE, pp 925–942 Briaud J-L, Moore BH, Mitchell GB (1989) Analysis of pile load tests at Lock and Dam 26. In: Foundation engineering: Current Principles and Practices. ASCE, pp 925–942
Zurück zum Zitat Bustamante M, Frank R (1997) Design of axially loaded piles in France: National Report. International Seminar Design of Axially loaded piles: European Practice, Brussels, Belgium Bustamante M, Frank R (1997) Design of axially loaded piles in France: National Report. International Seminar Design of Axially loaded piles: European Practice, Brussels, Belgium
Zurück zum Zitat Bustamante M, Gianeselli L (1982) Pile bearing capacity prediction by means of static penetrometer CPT. In: Proceedings of the 2-nd European Symposium on Penetration Testing, pp 493–500 Bustamante M, Gianeselli L (1982) Pile bearing capacity prediction by means of static penetrometer CPT. In: Proceedings of the 2-nd European Symposium on Penetration Testing, pp 493–500
Zurück zum Zitat Cai G, Liu S, Puppala AJ (2011) Evaluation of pile bearing capacity from piezocone penetration test data in soft Jiangsu Quaternary clay deposits. Marter Georesour Geotechnol 29:177–201CrossRef Cai G, Liu S, Puppala AJ (2011) Evaluation of pile bearing capacity from piezocone penetration test data in soft Jiangsu Quaternary clay deposits. Marter Georesour Geotechnol 29:177–201CrossRef
Zurück zum Zitat Cai G, Liu S, Puppala AJ (2012) Reliability assessment of CPTU-based pile capacity predictions in soft clay deposits. Eng Geol 141:84–91CrossRef Cai G, Liu S, Puppala AJ (2012) Reliability assessment of CPTU-based pile capacity predictions in soft clay deposits. Eng Geol 141:84–91CrossRef
Zurück zum Zitat Campanella R, Robertson P, Davies M, Sy A (1989) Use of in situ tests in pile design. In: Congrès International de Mècanique Des Sols Et Des Travaux de Fondations, vol 12, pp 199–203 Campanella R, Robertson P, Davies M, Sy A (1989) Use of in situ tests in pile design. In: Congrès International de Mècanique Des Sols Et Des Travaux de Fondations, vol 12, pp 199–203
Zurück zum Zitat Clausen C, Aas P, Karlsrud K (2005) Bearing capacity of driven piles in sand, the NGI approach. In: Proceedings of International Symposium. on Frontiers in Offshore Geotechnics, Perth, pp 574–580 Clausen C, Aas P, Karlsrud K (2005) Bearing capacity of driven piles in sand, the NGI approach. In: Proceedings of International Symposium. on Frontiers in Offshore Geotechnics, Perth, pp 574–580
Zurück zum Zitat Clisby M, Scholtes R, Corey M, Cole H, Teng P, Webb J (1978) An evaluation of pile bearing capacities, vol I. Final Report, Mississippi State Highway Department Clisby M, Scholtes R, Corey M, Cole H, Teng P, Webb J (1978) An evaluation of pile bearing capacities, vol I. Final Report, Mississippi State Highway Department
Zurück zum Zitat De Ruiter J, Beringen F (1979) Pile foundations for large North Sea structures. Marter Georesour Geotechnol 3:267–314 De Ruiter J, Beringen F (1979) Pile foundations for large North Sea structures. Marter Georesour Geotechnol 3:267–314
Zurück zum Zitat Douglas B (1981) Soil classificaion using electric cone penetrometer. In: Symposium on Cone Penetration Testing and Experience, Geotech. Engrg. Div. ASCE, pp 209–227 Douglas B (1981) Soil classificaion using electric cone penetrometer. In: Symposium on Cone Penetration Testing and Experience, Geotech. Engrg. Div. ASCE, pp 209–227
Zurück zum Zitat Eslami A, Fellenius BH (1997) Pile capacity by direct CPT and CPTu methods applied to 102 case histories. Can Geotech J 34:886–904 Eslami A, Fellenius BH (1997) Pile capacity by direct CPT and CPTu methods applied to 102 case histories. Can Geotech J 34:886–904
Zurück zum Zitat Eslami A, Aflaki E, Hosseini B (2011) Evaluating CPT and CPTu based pile bearing capacity estimation methods using Urmiyeh Lake Causeway piling records. Scientia Iranica 18:1009–1019CrossRef Eslami A, Aflaki E, Hosseini B (2011) Evaluating CPT and CPTu based pile bearing capacity estimation methods using Urmiyeh Lake Causeway piling records. Scientia Iranica 18:1009–1019CrossRef
Zurück zum Zitat Eslami A, Tajvidi I, Karimpour-Fard M (2014) Efficiency of methods for determining pile axial capacity-applied to 70 cases histories in Persian Gulf northern shore. Int J Civ Eng 12:45–54 Eslami A, Tajvidi I, Karimpour-Fard M (2014) Efficiency of methods for determining pile axial capacity-applied to 70 cases histories in Persian Gulf northern shore. Int J Civ Eng 12:45–54
Zurück zum Zitat Fellenius B (2002) Excerpt from Chapter 6 of the Red Book: Direct methods for estimating pile capacity vol 22. Background to UniCone.https://fellenius.net. Accessed May. Fellenius B (2002) Excerpt from Chapter 6 of the Red Book: Direct methods for estimating pile capacity vol 22. Background to UniCone.https://​fellenius.​net. Accessed May.
Zurück zum Zitat Finno R (1989) Subsurface conditions and pile installation data. American Society of Civil Engineers. In: Proceedings of Symposium on Predicted and Observed Behavior of Piles, Evanston, pp 1–74 Finno R (1989) Subsurface conditions and pile installation data. American Society of Civil Engineers. In: Proceedings of Symposium on Predicted and Observed Behavior of Piles, Evanston, pp 1–74
Zurück zum Zitat Gambini F (1985) Experience in Italy with centricast concrete piles. In: Proceedings of International Symposium on Penetrability and Drivability of Piles, pp 97–100 Gambini F (1985) Experience in Italy with centricast concrete piles. In: Proceedings of International Symposium on Penetrability and Drivability of Piles, pp 97–100
Zurück zum Zitat Haustorfer I, Plesiotis S Instrumented dynamic and static pile load testing at two bridge sites. In: Fifth Australia-New Zealand conference on geomechanics: prediction versus performance; preprints of Papers, 1988. Institution of Engineers, Australia, p 514 Haustorfer I, Plesiotis S Instrumented dynamic and static pile load testing at two bridge sites. In: Fifth Australia-New Zealand conference on geomechanics: prediction versus performance; preprints of Papers, 1988. Institution of Engineers, Australia, p 514
Zurück zum Zitat Hegazy YA, Mayne PW (2002) Objective site characterization using clustering of piezocone data. J Geotech Geoenviron Eng 128:986–996CrossRef Hegazy YA, Mayne PW (2002) Objective site characterization using clustering of piezocone data. J Geotech Geoenviron Eng 128:986–996CrossRef
Zurück zum Zitat Horvitz G, Stettler D, Crowser J (1981) Comparison of predicted and observed pile capacity. In: Cone Penetration Testing and Experience. ASCE, pp 413–433 Horvitz G, Stettler D, Crowser J (1981) Comparison of predicted and observed pile capacity. In: Cone Penetration Testing and Experience. ASCE, pp 413–433
Zurück zum Zitat Huichang W (1991) A method for predicting load–settlement relationship and bearing capacity of single piles by means of CPT. In: DFI, Beijing, 1991. Huichang W (1991) A method for predicting load–settlement relationship and bearing capacity of single piles by means of CPT. In: DFI, Beijing, 1991.
Zurück zum Zitat Jefferies M, Davies M (1991) Soil classification by the cone penetration test: discussion. Can Geotech J 28:173–176CrossRef Jefferies M, Davies M (1991) Soil classification by the cone penetration test: discussion. Can Geotech J 28:173–176CrossRef
Zurück zum Zitat Kempfert H-G, Becker P (2010) Axial pile resistance of different pile types based on empirical values. In: Deep Foundations and Geotechnical In Situ Testing, pp 149–154 Kempfert H-G, Becker P (2010) Axial pile resistance of different pile types based on empirical values. In: Deep Foundations and Geotechnical In Situ Testing, pp 149–154
Zurück zum Zitat Kolk H, Baaijens A, Senders M (2005) Design criteria for pipe piles in silica sands. In: Design criteria for pipe piles in silica sands. CRC Press/Balkema, pp 711–716 Kolk H, Baaijens A, Senders M (2005) Design criteria for pipe piles in silica sands. In: Design criteria for pipe piles in silica sands. CRC Press/Balkema, pp 711–716
Zurück zum Zitat Lee J, Salgado R (1999) Determination of pile base resistance in sands. J Geotech Geoenviron Eng 125:673–683CrossRef Lee J, Salgado R (1999) Determination of pile base resistance in sands. J Geotech Geoenviron Eng 125:673–683CrossRef
Zurück zum Zitat Lehane B, Schneider J, Xu X (2005) The UWA-05 method for prediction of axial capacity of driven piles in sand. In: Frontiers in Offshore Geotechnics: ISFOG, 2005. pp 683–689 Lehane B, Schneider J, Xu X (2005) The UWA-05 method for prediction of axial capacity of driven piles in sand. In: Frontiers in Offshore Geotechnics: ISFOG, 2005. pp 683–689
Zurück zum Zitat Long JH, Wysockey MH (1999) Accuracy of methods for predicting axial capacity of deep foundations. In: Analysis, Design, Construction, and Testing of Deep Foundations. ASCE, pp 180–195 Long JH, Wysockey MH (1999) Accuracy of methods for predicting axial capacity of deep foundations. In: Analysis, Design, Construction, and Testing of Deep Foundations. ASCE, pp 180–195
Zurück zum Zitat Lunne T, Powell JJ, Robertson PK (2002) Cone penetration testing in geotechnical practice. CRC Press Lunne T, Powell JJ, Robertson PK (2002) Cone penetration testing in geotechnical practice. CRC Press
Zurück zum Zitat Matsumoto T, Michi Y, Hirano T (1995) Performance of axially loaded steel pipe piles driven in soft rock. J Geotech Eng 121:305–315CrossRef Matsumoto T, Michi Y, Hirano T (1995) Performance of axially loaded steel pipe piles driven in soft rock. J Geotech Eng 121:305–315CrossRef
Zurück zum Zitat Mayerhof G (1976) Bearing capacity and settlemtn of pile foundations J Geotech Geoenviron Eng 102 Mayerhof G (1976) Bearing capacity and settlemtn of pile foundations J Geotech Geoenviron Eng 102
Zurück zum Zitat Mayne P (1993) Axial load-displacement behavior of drilled shaft foundations in Piedmont Residuum. US Federal Highway Administration. Research Report FHWA-41–30–2175, Mayne P (1993) Axial load-displacement behavior of drilled shaft foundations in Piedmont Residuum. US Federal Highway Administration. Research Report FHWA-41–30–2175,
Zurück zum Zitat Meyerhof G (1956) Penetration tests and bearing capacity of cohesionless soils. J Soil Mech Found Div 82:1–19 Meyerhof G (1956) Penetration tests and bearing capacity of cohesionless soils. J Soil Mech Found Div 82:1–19
Zurück zum Zitat Meyerhof GG (1983) Scale effects of ultimate pile capacity. J Geotech Eng 109:797–806CrossRef Meyerhof GG (1983) Scale effects of ultimate pile capacity. J Geotech Eng 109:797–806CrossRef
Zurück zum Zitat Nevels JB, Snethen DR (1994) Comparison of settlement predictions for single piles in sand based on penetration test results. In: Vertical and Horizontal Deformations of Foundations and Embankments. ASCE, pp 1028–1038 Nevels JB, Snethen DR (1994) Comparison of settlement predictions for single piles in sand based on penetration test results. In: Vertical and Horizontal Deformations of Foundations and Embankments. ASCE, pp 1028–1038
Zurück zum Zitat Niazi FS, Mayne PW (2013) Cone penetration test based direct methods for evaluating static axial capacity of single piles. Geotech Geol Eng 31:979–1009CrossRef Niazi FS, Mayne PW (2013) Cone penetration test based direct methods for evaluating static axial capacity of single piles. Geotech Geol Eng 31:979–1009CrossRef
Zurück zum Zitat Niazi FS, Mayne PW (2016) CPTu-based enhanced UniCone method for pile capacity. Eng Geol 212:21–34CrossRef Niazi FS, Mayne PW (2016) CPTu-based enhanced UniCone method for pile capacity. Eng Geol 212:21–34CrossRef
Zurück zum Zitat Nicola AD, Randolph M (1999) Centrifuge modelling of pipe piles in sand under axial loads. Géotechnique 49:295–318CrossRef Nicola AD, Randolph M (1999) Centrifuge modelling of pipe piles in sand under axial loads. Géotechnique 49:295–318CrossRef
Zurück zum Zitat Nottingham LC (1975) Use of quasi-static friction cone penetrometer data: To predict load capacity of displacement piles. University of Florida Nottingham LC (1975) Use of quasi-static friction cone penetrometer data: To predict load capacity of displacement piles. University of Florida
Zurück zum Zitat Obeta I, Onyia M, Obiekwe D (2018) Comparative analysis of methods of pile-bearing capacity evaluation using CPT logs from tropical soils. J South Afr Instit Civ Eng 60:44–55CrossRef Obeta I, Onyia M, Obiekwe D (2018) Comparative analysis of methods of pile-bearing capacity evaluation using CPT logs from tropical soils. J South Afr Instit Civ Eng 60:44–55CrossRef
Zurück zum Zitat Olsen R (1995) CPT stress normalization and prediction of soil classification. In: Proceedings of the International Symposium on Cone Penetration Testing, CPT'95, pp 257–262 Olsen R (1995) CPT stress normalization and prediction of soil classification. In: Proceedings of the International Symposium on Cone Penetration Testing, CPT'95, pp 257–262
Zurück zum Zitat O'Neil M (1988) Pile group prediction symposium-summary of prediction results. O'Neil M (1988) Pile group prediction symposium-summary of prediction results.
Zurück zum Zitat O'Neill M, Hawkins R, Mahar L (1981) Field study of pile group action. US Federal Highway Administration. FHWA Report RD-81/002, O'Neill M, Hawkins R, Mahar L (1981) Field study of pile group action. US Federal Highway Administration. FHWA Report RD-81/002,
Zurück zum Zitat Philipponnat G (1980) Méthode pratique de calcul d'un pieu isolé, à l'aide du pénétromètre statique Revue Francaise de Geotechnique, pp 55–64 Philipponnat G (1980) Méthode pratique de calcul d'un pieu isolé, à l'aide du pénétromètre statique Revue Francaise de Geotechnique, pp 55–64
Zurück zum Zitat Powell J, Quarterman R (1988) The interpretation of cone penetration tests in clays, with particular reference to rate effects vol 2. Powell J, Quarterman R (1988) The interpretation of cone penetration tests in clays, with particular reference to rate effects vol 2.
Zurück zum Zitat Powell J, Lunne T, Frank R (2001) Semi empirical design procedures for axial pile capacity in clays. In: 15th International Conference on Soils Mechanics and Geotechnical Engineering, 2001. pp 991–994 Powell J, Lunne T, Frank R (2001) Semi empirical design procedures for axial pile capacity in clays. In: 15th International Conference on Soils Mechanics and Geotechnical Engineering, 2001. pp 991–994
Zurück zum Zitat Price G, Wardle I (1982) A comparison between cone penetration test results and the performance of small diameter instrumented piles in stiff clay. In: Proceedings, the 2nd European Symposium on Penetration Testing, pp 775–780 Price G, Wardle I (1982) A comparison between cone penetration test results and the performance of small diameter instrumented piles in stiff clay. In: Proceedings, the 2nd European Symposium on Penetration Testing, pp 775–780
Zurück zum Zitat Rauser JG (2008) In-situ and nondestructive test methods applied to the design and construction of pile foundation projects in coastal Louisiana. Master Thesis, Rauser JG (2008) In-situ and nondestructive test methods applied to the design and construction of pile foundation projects in coastal Louisiana. Master Thesis,
Zurück zum Zitat Reese J, O’Neill M, Wang S (1988) Drilled shaft tests, interchange of west belt roll road and US290 highway Reese J, O’Neill M, Wang S (1988) Drilled shaft tests, interchange of west belt roll road and US290 highway
Zurück zum Zitat Robertson P (1990) Soil classification using the cone penetration test. Can Geotech J 27:151–158CrossRef Robertson P (1990) Soil classification using the cone penetration test. Can Geotech J 27:151–158CrossRef
Zurück zum Zitat Robertson PK, Campanella R, Gillespie D, Greig J (1986) Use of piezometer cone data. In: Use of In Situ Tests in Geotechnical Engineering. ASCE, pp 1263–1280 Robertson PK, Campanella R, Gillespie D, Greig J (1986) Use of piezometer cone data. In: Use of In Situ Tests in Geotechnical Engineering. ASCE, pp 1263–1280
Zurück zum Zitat Schmertmann JH (1978) Guidelines for cone penetration test: performance and design. New York, Federal Highway Administration Schmertmann JH (1978) Guidelines for cone penetration test: performance and design. New York, Federal Highway Administration
Zurück zum Zitat Schneider JA, Xu X, Lehane BM (2008) Database assessment of CPT-based design methods for axial capacity of driven piles in siliceous sands. J Geotechn Geoenviron Eng 134:1227–1244CrossRef Schneider JA, Xu X, Lehane BM (2008) Database assessment of CPT-based design methods for axial capacity of driven piles in siliceous sands. J Geotechn Geoenviron Eng 134:1227–1244CrossRef
Zurück zum Zitat Takesue K, Sasao H, Matsumoto T (1998) Correlation between ultimate pile skin friction and CPT data. Geotech Site Charact 2:1177–1182 Takesue K, Sasao H, Matsumoto T (1998) Correlation between ultimate pile skin friction and CPT data. Geotech Site Charact 2:1177–1182
Zurück zum Zitat Tumay MT, Fakhroo M (1981) Pile capacity in soft clays using electric QCPT data. In: Cone Penetration Testing and Experience. ASCE, pp 434–455 Tumay MT, Fakhroo M (1981) Pile capacity in soft clays using electric QCPT data. In: Cone Penetration Testing and Experience. ASCE, pp 434–455
Zurück zum Zitat Urkkada Technology Ltd (1996) Dynamic testing of piles and analysis. Puerto Rico, Final Report, Urkkada Technology Ltd. Project 9509DH17 Urkkada Technology Ltd (1996) Dynamic testing of piles and analysis. Puerto Rico, Final Report, Urkkada Technology Ltd. Project 9509DH17
Zurück zum Zitat Viergever MA (1982) Relation between cone penetration and static loading of piles in locally strongly varying sand layers. In: Proceedings of the 2nd European Symposium on Penetration Testing, ESOPT-2, Amsterdam, pp 927–932 Viergever MA (1982) Relation between cone penetration and static loading of piles in locally strongly varying sand layers. In: Proceedings of the 2nd European Symposium on Penetration Testing, ESOPT-2, Amsterdam, pp 927–932
Zurück zum Zitat Vukićević M, Marjanović M, Pujević V, Obradović N (2018) Evaluation of methods for predicting axial capacity of jacked-in and driven piles in cohesive soils. Građevinar 70:685–693 Vukićević M, Marjanović M, Pujević V, Obradović N (2018) Evaluation of methods for predicting axial capacity of jacked-in and driven piles in cohesive soils. Građevinar 70:685–693
Zurück zum Zitat Weber L (1987) Efficiency improvement of steel H-bearing piles vol 7210. Weber L (1987) Efficiency improvement of steel H-bearing piles vol 7210.
Zurück zum Zitat White DJ, Bolton MD (2005) Comparing CPT and pile base resistance in sand. In: Proceedings of the Institution of Civil Engineers-Geotechnical Engineering. vol 1. pp 3–14 White DJ, Bolton MD (2005) Comparing CPT and pile base resistance in sand. In: Proceedings of the Institution of Civil Engineers-Geotechnical Engineering. vol 1. pp 3–14
Zurück zum Zitat Wilkinson PB, Chambers JE, Meldrum PI, Ogilvy RD, Caunt S (2006a) Optimization of array configurations and panel combinations for the detection and imaging of abandoned mineshafts using 3D cross-hole electrical resistivity tomography. J Environ Eng Geophys 11:213–221CrossRef Wilkinson PB, Chambers JE, Meldrum PI, Ogilvy RD, Caunt S (2006a) Optimization of array configurations and panel combinations for the detection and imaging of abandoned mineshafts using 3D cross-hole electrical resistivity tomography. J Environ Eng Geophys 11:213–221CrossRef
Zurück zum Zitat Wilkinson PB, Meldrum PI, Chambers JE, Kuras O, Ogilvy RD (2006b) Improved strategies for the automatic selection of optimized sets of electrical resistivity tomography measurement configurations. Geophys J Int 167:1119–1126CrossRef Wilkinson PB, Meldrum PI, Chambers JE, Kuras O, Ogilvy RD (2006b) Improved strategies for the automatic selection of optimized sets of electrical resistivity tomography measurement configurations. Geophys J Int 167:1119–1126CrossRef
Zurück zum Zitat Yen T-L, Lin H, Chin C-T, Wang R (1989) Interpretation of instrumented driven steel pipe piles. In: Proceedings Foundation Engineering Congress: Current Principle and Practices, GSP No, 1989. pp 1293–1308 Yen T-L, Lin H, Chin C-T, Wang R (1989) Interpretation of instrumented driven steel pipe piles. In: Proceedings Foundation Engineering Congress: Current Principle and Practices, GSP No, 1989. pp 1293–1308
Zurück zum Zitat Zhang Z, Tumay MT (1999) Statistical to fuzzy approach toward CPT soil classification. J Geotech Geoenviron Eng 125:179–186CrossRef Zhang Z, Tumay MT (1999) Statistical to fuzzy approach toward CPT soil classification. J Geotech Geoenviron Eng 125:179–186CrossRef
Metadaten
Titel
Statistical Evaluation of CPT and CPTu Based Methods for Prediction of Axial Bearing Capacity of Piles
verfasst von
Parisa Heidari
Mahmoud Ghazavi
Publikationsdatum
12.10.2020
Verlag
Springer International Publishing
Erschienen in
Geotechnical and Geological Engineering / Ausgabe 2/2021
Print ISSN: 0960-3182
Elektronische ISSN: 1573-1529
DOI
https://doi.org/10.1007/s10706-020-01557-2

Weitere Artikel der Ausgabe 2/2021

Geotechnical and Geological Engineering 2/2021 Zur Ausgabe