Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

Strength and Hardness of 3D Printed Poly Lactic Acid and Carbon Fiber Poly Lactic Acid Thermoplastics

verfasst von: J. Durga Prasad Reddy, Debashis Mishra, Nagaraj Chetty

Erschienen in: Advances in Lightweight Materials and Structures

Verlag: Springer Singapore

share
TEILEN

Abstract

The two different thermoplastic materials such as poly lactic acid (PLA) and carbon fiber poly lactic acid (CF-PLA) are selected for printed specimen preparation by the fused deposition modeling (FDM) technique. The FDM technique is also named as 3D printing technique. The experimental investigation is made to get the said materials specimen tensile and flexural strength and hardness properties to make a comparison between the two chosen printing materials with respect to the change in working limits of process parameters. The literature and trial experiments are performed to propose various and most effective process parameters of 3D printing technique like fill density (60, 80 and 100%), print speed (0.06, 0.08 and 0.1 m/s) and layer thickness (0.1, 0.2 and 0.3 microns). The influence of these process parameters is understood by analyzing the obtained testing results. The fill density and print speed are most accountable for getting maximum hardness, flexural and tensile strength of 3D printed PLA and carbon fiber material specimen. The most suitable material among CF-PLA, and PLA can be assessed and the working range of 3D printing process parameters can be assumed through this experimental investigation.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Chacón JM, Caminero MA, García-Plaza E, Núnez PJ (2017) Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater Design Chacón JM, Caminero MA, García-Plaza E, Núnez PJ (2017) Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater Design
2.
Zurück zum Zitat Tian X, Liu T, Yang C, Wang Q, Li D (2016) Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites. Elsevier Compos Part A 88:198–205 Tian X, Liu T, Yang C, Wang Q, Li D (2016) Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites. Elsevier Compos Part A 88:198–205
3.
Zurück zum Zitat Ning F, Cong W, Qiu J, Wei J, Wang S (2015) Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Elsevier Compos Part B 80:369–378 Ning F, Cong W, Qiu J, Wei J, Wang S (2015) Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Elsevier Compos Part B 80:369–378
4.
Zurück zum Zitat Türk DA, Kussmaul R, Zogg M, Klahn C, Leutenecker-Twelsiek B, Meboldt, M (2017) Composites part production with additive manufacturing technologies. Procedia CIRP66:306–311 Türk DA, Kussmaul R, Zogg M, Klahn C, Leutenecker-Twelsiek B, Meboldt, M (2017) Composites part production with additive manufacturing technologies. Procedia CIRP66:306–311
5.
Zurück zum Zitat Black S (2015) A growing trend: 3D printing of aerospace tooling. Compos World Black S (2015) A growing trend: 3D printing of aerospace tooling. Compos World
6.
Zurück zum Zitat Van Der Klift F, Koga Y, Todoroki A, Ueda M, Hirano Y, Matsuzaki R (2016). 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens. Open J Compos Mater 6(01):18 Van Der Klift F, Koga Y, Todoroki A, Ueda M, Hirano Y, Matsuzaki R (2016). 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens. Open J Compos Mater 6(01):18
7.
Zurück zum Zitat Tekinalp HL, Kunc V, Velez-Garcia GM, Duty CE, Love LJ, Naskar AK, Blue CA, Ozcan S (2014) Highly oriented carbon fiber–polymer composites via additive manufacturing. Compos Sci Technol 105:144–150 Tekinalp HL, Kunc V, Velez-Garcia GM, Duty CE, Love LJ, Naskar AK, Blue CA, Ozcan S (2014) Highly oriented carbon fiber–polymer composites via additive manufacturing. Compos Sci Technol 105:144–150
8.
Zurück zum Zitat Chockalingam K, Jawahar N, Chandrasekhar U (2006) Influence of layer thickness on mechanical properties in stereo-lithography. Rapid Prototyp J 12(2):106–113 Chockalingam K, Jawahar N, Chandrasekhar U (2006) Influence of layer thickness on mechanical properties in stereo-lithography. Rapid Prototyp J 12(2):106–113
9.
Zurück zum Zitat Tontowi AE, Ramdani L, Erdizon RV, Baroroh DK (2017) Optimization of 3D-Printer process parameters for improving quality of poly-lactic acid printed part. Int J Eng Technol 9 Tontowi AE, Ramdani L, Erdizon RV, Baroroh DK (2017) Optimization of 3D-Printer process parameters for improving quality of poly-lactic acid printed part. Int J Eng Technol 9
10.
Zurück zum Zitat Kozior T, Kundera C (2017) Evaluation of the influence of parameters of FDM technology on the selected mechanical properties of models. Procedia Eng 192:463–468 Kozior T, Kundera C (2017) Evaluation of the influence of parameters of FDM technology on the selected mechanical properties of models. Procedia Eng 192:463–468
11.
Zurück zum Zitat Luca DV (2017) Design and Manufacture of optimized continuous composite fiber filament using additive manufacturing systems. Luca J Mater Sci Eng 6:4 Luca DV (2017) Design and Manufacture of optimized continuous composite fiber filament using additive manufacturing systems. Luca J Mater Sci Eng 6:4
12.
Zurück zum Zitat Rodríguez-Panes A, Claver J, Camacho AM (2018) The influence of manufacturing parameters on the mechanical behaviour of PLA and ABS pieces manufactured by FDM: a comparative analysis. Materials11(8):1333 Rodríguez-Panes A, Claver J, Camacho AM (2018) The influence of manufacturing parameters on the mechanical behaviour of PLA and ABS pieces manufactured by FDM: a comparative analysis. Materials11(8):1333
13.
Zurück zum Zitat Vishwas M, Basavaraj CK (2017) Studies on optimizing process parameters of fused deposition modelling technology for ABS. Elsevier Mater Today Proc 4:10994–11003 Vishwas M, Basavaraj CK (2017) Studies on optimizing process parameters of fused deposition modelling technology for ABS. Elsevier Mater Today Proc 4:10994–11003
14.
Zurück zum Zitat Nagaraj C, Mishra D, Tirupati T (2019) Optimization of the FDM Process parameters to attain the desired strength of ABS specimens. Int J Recent Technol Eng (IJRTE)8(4) Nagaraj C, Mishra D, Tirupati T (2019) Optimization of the FDM Process parameters to attain the desired strength of ABS specimens. Int J Recent Technol Eng (IJRTE)8(4)
15.
Zurück zum Zitat Ning F, Cong W, Hu Y, Wang H (2017) Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: effects of process parameters on tensile properties. J Compos Mater51(4):451–462 Ning F, Cong W, Hu Y, Wang H (2017) Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: effects of process parameters on tensile properties. J Compos Mater51(4):451–462
16.
Zurück zum Zitat Li N, Li Y, Liu S (2016) Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing. J Mater Process Technol 238:218–225 Li N, Li Y, Liu S (2016) Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing. J Mater Process Technol 238:218–225
17.
Zurück zum Zitat Nikzad M, Masood SH, Sbarski I (2011) Thermo-mechanical properties of a highly filled polymeric composite for Fused deposition modelling. Elsevier Mater Design 32:3448–3456 Nikzad M, Masood SH, Sbarski I (2011) Thermo-mechanical properties of a highly filled polymeric composite for Fused deposition modelling. Elsevier Mater Design 32:3448–3456
18.
Zurück zum Zitat Quan Z, Larimore Z, Wu A, Yu J, Qin X, Mirotznik M, Suhr J, Byun J-H, Oh Y, Chou T-W (2016) Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite. Elsevier Compos Sci Technol 126:139–148 Quan Z, Larimore Z, Wu A, Yu J, Qin X, Mirotznik M, Suhr J, Byun J-H, Oh Y, Chou T-W (2016) Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite. Elsevier Compos Sci Technol 126:139–148
19.
Zurück zum Zitat Liu W, Zhou J, Ma Y, Wang J, Xu J (2017) Fabrication of PLA filaments and its printable performance. IOP Conf Series Mater Sci Eng 275:012033 Liu W, Zhou J, Ma Y, Wang J, Xu J (2017) Fabrication of PLA filaments and its printable performance. IOP Conf Series Mater Sci Eng 275:012033
20.
Zurück zum Zitat Dey A, Yodo N (2019) A systematic survey of FDM process parameter optimization and their influence on part characteristics. J Manuf Mater Process MDPI Dey A, Yodo N (2019) A systematic survey of FDM process parameter optimization and their influence on part characteristics. J Manuf Mater Process MDPI
21.
Zurück zum Zitat Somi Reddy M, Singh CV, Czekanski A (2020) Mechanical behaviour of 3D printed composite parts with short carbon fiber reinforcements. Eng Failure Anal Elsevier 107 Somi Reddy M, Singh CV, Czekanski A (2020) Mechanical behaviour of 3D printed composite parts with short carbon fiber reinforcements. Eng Failure Anal Elsevier 107
22.
Zurück zum Zitat Srivastava A, Bhaskar J (2019) Experimental investigation of printing parameters of fused deposition modelling-based 3D printers for average surface roughness. Advances in Additive Manufacturing and Joining. Lecture Notes on Multidisciplinary Industrial Engineering. Springer Srivastava A, Bhaskar J (2019) Experimental investigation of printing parameters of fused deposition modelling-based 3D printers for average surface roughness. Advances in Additive Manufacturing and Joining. Lecture Notes on Multidisciplinary Industrial Engineering. Springer
23.
Zurück zum Zitat Luo H, Tan Y, Fan Z, Jun Z, Tu Y, Cui K (2019) Selectively enhanced 3D printing process and performance analysis of continuous carbon fiber composite material. Materials 12:3529 Luo H, Tan Y, Fan Z, Jun Z, Tu Y, Cui K (2019) Selectively enhanced 3D printing process and performance analysis of continuous carbon fiber composite material. Materials 12:3529
24.
Zurück zum Zitat Jun Z, Zhou Z, Fan Z, Tang Y, Tu Y, Yang B (2020) Performance of 3D-printed continuous carbon fiber reinforced plastic with pressure. Materials 13:471 Jun Z, Zhou Z, Fan Z, Tang Y, Tu Y, Yang B (2020) Performance of 3D-printed continuous carbon fiber reinforced plastic with pressure. Materials 13:471
Metadaten
Titel
Strength and Hardness of 3D Printed Poly Lactic Acid and Carbon Fiber Poly Lactic Acid Thermoplastics
verfasst von
J. Durga Prasad Reddy
Debashis Mishra
Nagaraj Chetty
Copyright-Jahr
2020
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-7827-4_64

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.