Skip to main content
main-content

Zeitschrift

Structural and Multidisciplinary Optimization

Structural and Multidisciplinary Optimization 3/2017

Ausgabe 3/2017

Inhaltsverzeichnis ( 25 Artikel )

08.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Quantum seeded evolutionary computational technique for constrained optimization in engineering design and manufacturing

K. Hans Raj, Rajat Setia

11.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Sequential approximate optimization of industrial hammer peening using finite element simulations

Jacques Luk-Cyr, Rayan El-Bawab, Henri Champliaud, Jacques Lanteigne, Aurelian Vadean

11.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Structural optimization with fatigue and ultimate limit constraints of jacket structures for large offshore wind turbines

Jacob Oest, René Sørensen, Lars Chr. T. Overgaard, Erik Lund

12.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Layout optimization of thin sound-hard material to improve the far-field directivity properties of an acoustic horn

Esubalewe Lakie Yedeg, Eddie Wadbro, Martin Berggren

13.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Optimization of retaining wall design using evolutionary algorithms

Amir H. Gandomi, Ali R. Kashani, David A. Roke, Mehdi Mousavi

15.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Bending of beams of arbitrary cross sections - optimal design by analytical formulae

M. Gobbi, G. Previati, F. Ballo, G. Mastinu

18.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Topology optimization for minimum weight with compliance and simplified nominal stress constraints for fatigue resistance

Maxime Collet, Matteo Bruggi, Pierre Duysinx

20.07.2016 | RESEARCH PAPER | Ausgabe 3/2017 Open Access

Scalable Pareto set generation for multiobjective co-design problems in water distribution networks: a continuous relaxation approach

Filippo Pecci, Edo Abraham, Ivan Stoianov

22.07.2016 | RESEARCH PAPER | Ausgabe 3/2017 Open Access

An additive manufacturing filter for topology optimization of print-ready designs

Matthijs Langelaar

22.07.2016 | RESEARCH PAPER | Ausgabe 3/2017

Soap film analogy for anisotropically stretched membranes and cable nets

Valentina Beatini, Gianni Royer-Carfagni

29.07.2016 | RESEARCH PAPER | Ausgabe 3/2017 Open Access

Multi-criteria optimization of an aircraft propeller considering manufacturing

Structural design optimization simultaneously considering a knowledge-based manufacturing and a structural model
Markus E. Schatz, Andreas Hermanutz, Horst J. Baier

04.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Topology optimization of hyperbolic metamaterials for an optical hyperlens

Masaki Otomori, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki, Jacob Andkjær

04.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Efficient aerodynamic shape optimization of transonic wings using a parallel infilling strategy and surrogate models

J. Liu, W.-P. Song, Z.-H. Han, Y. Zhang

04.08.2016 | RESEARCH PAPER | Ausgabe 3/2017 Open Access

An evaluation of simple techniques to model the variation in strain hardening behavior of steel

Sandeep Shetty, Larsgunnar Nilsson

06.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Advanced automatic grouping for form-finding of tensegrity structures

Seunghye Lee, Jaehong Lee

10.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

A simple alternative formulation for structural optimisation with dynamic and buckling objectives

David J. Munk, Gareth A. Vio, Grant P. Steven

10.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Estimation of measurement errors in orthotropic elastic moduli determined from natural frequencies

Akira Saito, Atsushi Kawamoto, Masakatsu Kuroishi, Hideo Nakai, Shintaro Yamasaki

12.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Coupled operational optimization of smart valve system subject to different approach angles of a pipe contraction

Peiman Naseradinmousavi, Sahar Ghanipoor Machiani, Mohammad A. Ayoubi, C. Nataraj

13.08.2016 | RESEARCH PAPER | Ausgabe 3/2017 Open Access

Nonlinear filters in topology optimization: existence of solutions and efficient implementation for minimum compliance problems

Linus Hägg, Eddie Wadbro

16.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Remarks on multi-fidelity surrogates

Chanyoung Park, Raphael T. Haftka, Nam H. Kim

19.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Multi-objective optimization of laminated composite shells for minimum mass/cost and maximum buckling pressure with failure criteria under external hydrostatic pressure

Ahmad Reza Ghasemi, Mohammad Hadi Hajmohammad

19.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Topology optimization for heat conduction using generative design algorithms

Danny J. Lohan, Ercan M. Dede, James T. Allison

19.08.2016 | RESEARCH PAPER | Ausgabe 3/2017

Grayscale-free topology optimization for electromagnetic design problem of in-vehicle reactor

Shintaro Yamasaki, Atsushi Kawamoto, Akira Saito, Masakatsu Kuroishi, Kikuo Fujita

16.09.2016 | REVIEW ARTICLE | Ausgabe 3/2017

On design optimization for structural crashworthiness and its state of the art

Jianguang Fang, Guangyong Sun, Na Qiu, Nam H. Kim, Qing Li

26.08.2016 | INDUSTRIAL APPLICATION | Ausgabe 3/2017

Reliability-based design optimization of composite stiffened panels in post-buckling regime

Carlos López, Omar Bacarreza, Aitor Baldomir, Santiago Hernández, M. H. Ferri Aliabadi

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise