nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

24.06.2021 | ORIGINAL ARTICLE

Structure and properties of АА7075-SiC composite parts produced by cold spray additive manufacturing

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, the cold spray additive manufacturing technology was applied for producing composite AA7075 deposits reinforced by silicon carbide particles. It was found that ceramic content in the composite did not exceed 21–25 %vol. Different heat treatments and capsule-free hot isostatic pressing (HIP) were performed to homogenise the structure of the AA7075-SiC composite. The microstructure of the composite before and after heat treatments was analysed using SEM and TEM analysis and compared with bulk AA7075. The analysis showed that the presence of SiC in the composite influenced the distribution of hardening phases in AA7075 during heat treatment. The presence of uniformly distributed SiC particles accelerated the decomposition of the supersaturated aluminium solid solution during ageing. The decomposition process blocked the formation of large hardening precipitates at the grain boundaries generally observed at the bulk metallic alloy AA7075. The compressive strength tests revealed the improvement of the strain at failure of the composite deposits after heat treatment and HIP. At the same time, the compressive strength slightly decreased. The thermal expansion coefficient (TEC) of AA7075-SiC20% composite was lower than for the base bulk AA7075. The dilatation behaviour of the composite during TEC tests could be approximated using the simple rule of mixture.

Vorheriger Artikel Real-time event-based platform for the development of digital twin applications

Nächster Artikel Mechanism of pre-deformation effect on sheet deep-drawing forming under magnetic field condition using a magnetorheological fluid (MRF) medium

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Pandey AK, Chatterjee S, Mahapatra SS (2019) Analysis and characterisation of weld quality during butt welding through friction stir welding. Indian J Eng Mater Sci 26:298–310

Khomutov MG, Pozdniakov AV, Churyumov AY, Barkov RY, Solonin AN, Glavatskikh MV (2021) Flow stress modelling and 3D processing maps of Al4.5Zn4.5Mg1Cu0.12Zr alloy with different scandium contents. Appl Sci 11:4587. https://doi.org/10.3390/app11104587CrossRef

Kermanidis AT (2020) Aircraft aluminum alloys: applications and future trends. In: Revolutionizing aircraft materials and processes. Springer International Publishing, pp 21–55

Bodukuri AK, Eswaraiah K, Rajendar K, Sampath V (2016) Fabrication of Al–SiC–B4C metal matrix composite by powder metallurgy technique and evaluating mechanical properties. Perspect Sci 8:428–431. https://doi.org/10.1016/j.pisc.2016.04.096CrossRef

Pradhan S, Ghosh S, Barman TK, Sahoo P (2017) Tribological behavior of Al-SiC metal matrix composite under dry, aqueous and alkaline medium. Silicon 9:923–931. https://doi.org/10.1007/s12633-016-9504-yCrossRef

Jain PK, Baredar P, Soni SC (2019) Development of silicon carbide particle reinforced aluminium 6101 metal matrix composite using two-step stir casting. In: Materials Today: Proceedings Elsevier Ltd:3521–3525

Shalaby EAM, Churyumov AY, Besisa DHA, Daoud A, Abou el-khair MT (2017) A comparative study of thermal conductivity and tribological behavior of squeeze cast A359/AlN and A359/SiC composites. J Mater Eng Perform 26:3079–3089. https://doi.org/10.1007/s11665-017-2734-3CrossRef

Mohamed EA, Churyumov AY (2016) Investigation of the microstructure and properties of Al–Si–Mg/SiC composite materials produced by solidification under pressure. Phys Met Metallogr 117:1054–1060. https://doi.org/10.1134/S0031918X16100070CrossRef

Zulfia A, Raga K, Narottama W, Yunus S (2019) Al6061 reinforced Al2O3 metal matrix composite produced by double blade stir casting. 9:

10.

Behera B, Dalai R, Mishra DK, Badjena SK (2020) Development and characterisation of Al2O3 and SiC reinforced Al-Cu metal matrix hybrid composites. In: Materials Science Forum. Trans Tech Publications Ltd, pp 202–208

11.

Pozdniakov AV, Lotfy A, Qadir A, Zolotorevskiy VS (2016) Effect of the B4C content on the structure and thermal expansion coefficient of the Al–5% Cu alloy-based metal-matrix composite material. Phys Met Metallogr 117:783–788. https://doi.org/10.1134/S0031918X16060107CrossRef

12.

Pozdniakov AV, Lotfy A, Qadir A, Shalaby E, Khomutov MG, Churyumov AY, Zolotorevskiy VS (2017) Development of Al-5Cu/B4C composites with low coefficient of thermal expansion for automotive application. Mater Sci Eng A 688:1–8. https://doi.org/10.1016/j.msea.2017.01.075CrossRef

13.

Pozdniakov AV, Zolotorevskiy VS, Barkov RY, Lotfy A, Bazlov AI (2016) Microstructure and material characterisation of 6063/B4C and 1545K/B4C composites produced by two stir casting techniques for nuclear applications. J Alloys Compd 664:317–320. https://doi.org/10.1016/j.jallcom.2015.12.228CrossRef

14.

Lotfy A, Pozdniakov AV, Zolotorevskiy VS, Abou el-khair MT, Daoud A, Mochugovskiy AG (2018) Novel preparation of Al-5%Cu / BN and Si3N4 composites with analysing microstructure, thermal and mechanical properties. Mater Charact 136:144–151. https://doi.org/10.1016/j.matchar.2017.12.015CrossRef

15.

Shalaby EAM, Churyumov AY, Solonin AN, Lotfy A (2016) Preparation and characterisation of hybrid A359/(SiC+Si3N4) composites synthesised by stir/squeeze casting techniques. Mater Sci Eng A 674:18–24. https://doi.org/10.1016/j.msea.2016.07.058CrossRef

16.

Alekseev AV, Yesikov MA, Strekalov VV, Mali VI, Khasin AA, Predtechensky MR (2020) Effect of single wall carbon nanotubes on strength properties of aluminum composite produced by spark plasma sintering and extrusion. Mater Sci Eng A 793:139746. https://doi.org/10.1016/j.msea.2020.139746CrossRef

17.

Zhang X, Li S, Pan B, Pan D, Liu L, Hou X, Chu M, Kondoh K, Zhao M (2019) Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites. Carbon N Y 155:686–696. https://doi.org/10.1016/j.carbon.2019.09.016CrossRef

18.

Lotfy A, Pozdniakov AV, Zolotorevskiy VS, Mohamed E, el-Khair MTA, Daoud A, Fairouz F (2019) Microstructure, compression and creep properties of Al-5%Cu-0.8Mn/5%B4C composites. Mater Res Express 6. https://doi.org/10.1088/2053-1591/ab33b7

19.

Chawla N, Chawla KK (2013) Metal matrix composites. Springer New York, New York, NY

20.

DING W, CHENG Y, CHEN T, ZHAO X, LIU X (2020) Research status and application prospect of aluminum matrix composites. Res Appl Mater Sci 2. https://doi.org/10.33142/msra.v2i1.1975

21.

Muthukrishnan N, Davim JP (2009) Optimisation of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis. J Mater Process Technol 209:225–232. https://doi.org/10.1016/j.jmatprotec.2008.01.041CrossRef

22.

Hashiguchi D, Tricker D, Tarrant A, Campbell J, Pokross C (2017) Discontinuously reinforced aluminum MMC extrusions. Met Powder Rep 72:252–258. https://doi.org/10.1016/j.mprp.2016.01.074CrossRef

23.

Suryanarayanan K, Praveen R, Srinivasan R (2013) Silicon carbide reinforced aluminum metal matrix composites for aerospace applications: a literature review. International Journal of Innovative Research in Science. Eng Technol 2:6336–6344

24.

Halil K, Ismail OI, Sibel D, Çi R (2019) Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy. J Mater Res Technol 8:5348–5361. https://doi.org/10.1016/j.jmrt.2019.09.002CrossRef

25.

Mavhungu ST, Akinlabi ET, Onitiri MA, Varachia FM (2017) Aluminum matrix composites for industrial use: advances and trends. Procedia Manuf 7:178–182. https://doi.org/10.1016/j.promfg.2016.12.045CrossRef

26.

Griffiths RJ, Perry MEJ, Sietins JM, Zhu Y, Hardwick N, Cox CD, Rauch HA, Yu HZ (2019) A perspective on solid-state additive manufacturing of aluminum matrix composites using MELD. J Mater Eng Perform 28:648–656. https://doi.org/10.1007/s11665-018-3649-3CrossRef

27.

Jiang J, Wang Y (2015) Microstructure and mechanical properties of the rheoformed cylindrical part of 7075 aluminum matrix composite reinforced with nano-sized SiC particles. Mater Des 79:32–41. https://doi.org/10.1016/j.matdes.2015.04.040CrossRef

28.

Uğur A, Nas E, Gökkaya H (2020) Investigation of the machinability of SiC reinforced MMC materials produced by molten metal stirring and conventional casting technique in die-sinking electrical discharge machine. Int J Mech Sci 186:105875. https://doi.org/10.1016/j.ijmecsci.2020.105875CrossRef

29.

Mayuet Ares PF, Rodríguez-Parada L, Gómez-Parra Á, Batista Ponce M (2020) Characterization and defect analysis of machined regions in Al-SiC metal matrix composites using an abrasive water jet machining process. Appl Sci 10:1512. https://doi.org/10.3390/app10041512CrossRef

30.

Chen B, Xi X, Tan C, Song X (2020) Recent progress in laser additive manufacturing of aluminum matrix composites. Curr Opin Chem Eng 28:28–35CrossRef

31.

Flanagan S, Main J, Lynch P, et al (2019) A mechanical evaluation of an overaged aluminum metal-matrix-composite (2009 Al/SiC/15p MMC). In: Procedia Manufacturing. Elsevier B.V., pp 58–64

32.

Repeto D, Fernández-Vidal SR, Mayuet PF, Salguero J, Batista M (2020) On the machinability of an Al-63%SiC metal matrix composite. Materials (Basel) 13:1186. https://doi.org/10.3390/ma13051186CrossRef

33.

Ye T, Xu Y, Ren J (2019) Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite. Mater Sci Eng A 753:146–155. https://doi.org/10.1016/j.msea.2019.03.037CrossRef

34.

Şenel MC, Gürbüz M, Koç E (2017) Fabrication and characterisation of SiC and Si 3 N 4 reinforced aluminum matrix composites. Univers J Mater Sci 5:95–101. https://doi.org/10.13189/ujms.2017.050403CrossRef

35.

He L, Hassani M (2020) A review of the mechanical and tribological behavior of cold spray metal matrix composites. J Therm Spray Technol 29:1565–1608CrossRef

36.

Astfalck LC, Kelly GK, Li X, Sercombe TB (2017) On the breakdown of SiC during the selective laser melting of aluminum matrix composites. Adv Eng Mater 19:1600835. https://doi.org/10.1002/adem.201600835CrossRef

37.

Naher S, Brabazon D, Looney L (2005) Development and assessment of a new quick quench stir caster design for the production of metal matrix composites. J Mater Process Technol 166:430–439. https://doi.org/10.1016/j.jmatprotec.2004.09.043CrossRef

38.

Popov VA, Khomutov MG, Prosviryakov AS (2014) Producing metal matrix composites with non-agglomerated nanodiamond reinforcements by consolidation of mechanically alloyed granules with liquid phase formation. In: 16th European Conference on Composite Materials, ECCM 2014

39.

Mohapatra S, Chaubey AK, Mishra DK, Singh SK (2016) Fabrication of Al-TiC composites by hot consolidation technique: its microstructure and mechanical properties. J Mater Res Technol 5:117–122. https://doi.org/10.1016/j.jmrt.2015.07.001CrossRef

40.

Singh J (2016) Fabrication characteristics and tribological behavior of Al/SiC/Gr hybrid aluminum matrix composites: a review. Friction 4:191–207CrossRef

41.

Gyansah L, Tariq NH, Tang JR, et al (2018) Cold sprayed additive manufacturing of sic/al metal matrix composite: synthesis, microstructure, heat treatment and tensile properties. In: Materials Science Forum. Trans Tech Publications Ltd, pp 62–75

42.

Raoelison RN, Verdy C, Liao H (2017) Cold gas dynamic spray additive manufacturing today: deposit possibilities, technological solutions and viable applications. Mater Des 133:266–287. https://doi.org/10.1016/j.matdes.2017.07.067CrossRef

43.

Sova A, Doubenskaia M, Trofimov E, Samodurova M, Ulianitsky V, Smurov I (2021) Cold spray of metal powder mixtures: achievements, issues and perspectives. Trans Indian Inst Metals 74:559–570CrossRef

44.

Yin S, Cavaliere P, Aldwell B, Jenkins R, Liao H, Li W, Lupoi R (2018) Cold spray additive manufacturing and repair: fundamentals and applications. Addit Manuf 21:628–650

45.

Sova A, Maestracci R, Jeandin M, Bertrand P, Smurov I (2017) Kinetics of composite coating formation process in cold spray: modelling and experimental validation. Surf Coat Technol 318:309–314. https://doi.org/10.1016/j.surfcoat.2016.06.084CrossRef

46.

Kumar S, Reddy SK, Joshi SV (2017) Microstructure and performance of cold sprayed Al-SiC composite coatings with high fraction of particulates. Surf Coat Technol 318:62–71. https://doi.org/10.1016/j.surfcoat.2016.11.047CrossRef

47.

Cao K, Yu M, Liang CM, Chen H (2020) Quantitative determination of SiC particles distribution of cold sprayed Al5056/SiC composite coatings. Surf Eng 36:1040–1048. https://doi.org/10.1080/02670844.2019.1609741CrossRef

48.

Zhang H, Yu M, Liang C, Chen H (2021) Effect of SiC deposition behavior on microstructure and mechanical properties of cold-sprayed Al5056/SiC composite coatings. J Therm Spray Technol:1–12. https://doi.org/10.1007/s11666-021-01204-z

49.

Assadi H, Gärtner F, Stoltenhoff T, Kreye H (2003) Bonding mechanism in cold gas spraying. Acta Mater 51:4379–4394. https://doi.org/10.1016/S1359-6454(03)00274-XCrossRef

50.

Hassani-Gangaraj M, Veysset D, Champagne VK, Nelson KA, Schuh CA (2018) Adiabatic shear instability is not necessary for adhesion in cold spray. Acta Mater 158:430–439. https://doi.org/10.1016/j.actamat.2018.07.065CrossRef

51.

Shockley JM, Descartes S, Vo P, Irissou E, Chromik RR (2015) The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al-Al2O3 composites. Surf Coat Technol 270:324–333. https://doi.org/10.1016/j.surfcoat.2015.01.057CrossRef

52.

Klinkov SV, Kosarev VF (2012) Cold spraying activation using an abrasive admixture. J Therm Spray Technol 21:1046–1053CrossRef

53.

Fernandez R, Jodoin B (2018) Cold spray aluminum–alumina cermet coatings: effect of alumina content. J Therm Spray Technol 27:603–623. https://doi.org/10.1007/s11666-018-0702-6CrossRef

54.

Lapushkina E, Sova A (2019) Effect of Powder Mixture composition on the deposition efficiency in cold spay: modelling and experimental validation. Coatings 9:832. https://doi.org/10.3390/coatings9120832CrossRef

55.

Rokni MR, Widener CA, Champagne VR (2014) Microstructural evolution of 6061 aluminum gas-atomised powder and high-pressure cold-sprayed deposition. J Therm Spray Technol 23:514–524CrossRef

56.

Rokni MR, Widener CA, Crawford GA (2014) Microstructural evolution of 7075 Al gas atomised powder and high-pressure cold sprayed deposition. Surf Coat Technol 251:254–263. https://doi.org/10.1016/j.surfcoat.2014.04.035CrossRef

57.

Khomutov M, Chereshneva A, Petrovskiy P, Daubarayte D, Cheverikin V, Sova A, Travyanov A, Smurov I (2020) Microstructure of Al–Mg-Sc-Zr alloy cold spray deposits after heat treatment and hot isostatic pressing. J Alloys Compd 858:157644. https://doi.org/10.1016/j.jallcom.2020.157644CrossRef

58.

Grigoriev S, Okunkova A, Sova A, Bertrand P, Smurov I (2015) Cold spraying: from process fundamentals towards advanced applications. Surf Coat Technol 268:77–84. https://doi.org/10.1016/j.surfcoat.2014.09.060CrossRef

59.

Rokni MR, Widener CA, Champagne VK, Crawford GA, Nutt SR (2017) The effects of heat treatment on 7075 Al cold spray deposits. Surf Coat Technol 310:278–285. https://doi.org/10.1016/j.surfcoat.2016.10.064CrossRef

60.

Xliang Z, Yan H, X hui C (2017) Evolution of second phases and mechanical properties of 7075 Al alloy processed by solution heat treatment. Trans Nonferrous Met Soc China (English Ed) 27:2146–2155. https://doi.org/10.1016/S1003-6326(17)60240-1CrossRef

61.

Jacumasso SC, Martins J d P, de Carvalho ALM (2016) Analysis of precipitate density of an aluminium alloy by TEM and AFM. Rev Esc Minas 69:451–457. https://doi.org/10.1590/0370-44672016690019CrossRef

62.

Kumar PV, Reddy GM, Rao KS (2015) Microstructure, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir welds – effect of post weld heat treatment. Def Technol 11:362–369. https://doi.org/10.1016/j.dt.2015.04.003CrossRef

63.

Lee H, Choi JH, Jo MC, Lee D, Shin S, Jo I, Lee SK, Lee S (2018) Effects of SiC particulate size on dynamic compressive properties in 7075-T6 Al-SiCp composites. Mater Sci Eng A 738:412–419. https://doi.org/10.1016/j.msea.2018.09.082CrossRef

64.

Senthilvelan T, Gopalakannan S, Vishnuvarthan S, Keerthivaran K (2013) Fabrication and characterisation of SiC, Al2O3 and B4C reinforced Al-Zn-Mg-Cu alloy (AA 7075) metal matrix composites: a study. Adv Mater Res 622:1295–1299. https://doi.org/10.4028/www.scientific.net/AMR.622-623.1295CrossRef

65.

Roy P, Singh S, Pal K (2019) Enhancement of mechanical and tribological properties of SiC- and CB-reinforced aluminium 7075 hybrid composites through friction stir processing. Adv Compos Mater 28:1–18. https://doi.org/10.1080/09243046.2017.1405596CrossRef

66.

Shi YY, Wang XG, Liu JT (2017) Microstructure and thermal physical properties of a β-SiCp/Al composite for electronic packaging produced by powder metallurgy. In: Key Engineering Materials. Trans Tech Publications Ltd, pp 565–570

67.

Chawla N, Deng X, Schnell DRM (2006) Thermal expansion anisotropy in extruded SiC particle reinforced 2080 aluminum alloy matrix composites. Mater Sci Eng A 426:314–322. https://doi.org/10.1016/j.msea.2006.04.054CrossRef

68.

Torres B, Rodrigo P, Campo M, Ureña A, Rams J (2009) Oxy-acetylene flame thermal spray of Al/SiC p composites with high fraction of reinforcements. J Therm Spray Technol 18:642–651CrossRef

69.

Shen YL, Needleman A, Suresh S (1994) Coefficients of thermal expansion of metal-matrix composites for electronic packaging. Metall Mater Trans A 25:839–850. https://doi.org/10.1007/BF02665460CrossRef

70.

Lee YS, Gungor MN, Batt TJ, Liaw PK (1991) Semi-empirical investigation of thermal expansion behavior of components in a two-phase particle-reinforced metal matrix composite. Mater Sci Eng A 145:37–46. https://doi.org/10.1016/0921-5093(91)90293-VCrossRef

Titel: Structure and properties of АА7075-SiC composite parts produced by cold spray additive manufacturing
Publikationsdatum: 24.06.2021
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07457-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2021

Single-point incremental forming of AA6061 aluminum alloy at elevated temperatures

Mechanism of pre-deformation effect on sheet deep-drawing forming under magnetic field condition using a magnetorheological fluid (MRF) medium

Predicting the ultimate tensile strength of AISI 1045 steel and 2017-T4 aluminum alloy joints in a laser-assisted rotary friction welding process using machine learning: a comparison with response surface methodology

Influence of defects on the effective properties of selectively laser melted cellular structures

Instantaneous milling force prediction and valuation of end milling based on friction angle in orthogonal cutting

Cryogenic treatment analysis of electrodes in wire electric discharge machining of squeeze casted Al2024/Al2O3/W composite

Premium Partner

Marktübersichten