Weitere Artikel dieser Ausgabe durch Wischen aufrufen
Cavitation erosion (CE) is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid development of surface engineering techniques. However, the influence of coating structures on CE resistance has not been systematically studied. To better understand their relationship, micro-nano and conventional WC-10Co4Cr cermet coatings are deposited by high velocity oxygen fuel spraying(HVOF), and their microstructures are analyzed by OM, SEM and XRD. Meanwhile, characterizations of mechanical and electrochemical properties of the coatings are carried out, as well as the coatings’ resistance to CE in 3.5 wt % NaCl solution, and the cavitation mechanisms are explored. Results show that micro-nano WC-10Co4Cr coating possesses dense microstructure, excellent mechanical and electrochemical properties, with very low porosity of 0.26 ± 0.07% and extraordinary fracture toughness of 5.58 ± 0.51 MPa·m1/2. Moreover, the CE resistance of micro-nano coating is enhanced above 50% than conventional coating at the steady CE period in 3.5 wt % NaCl solution. The superior CE resistance of micro-nano WC-10Co4Cr coating may originate from the unique micro-nano structure and properties, which can effectively obstruct the formation and propagation of CE crack. Thus, a new method is proposed to enhance the CE resistance of WC-10Co4Cr coating by manipulating the microstructure.
Y Z Kehr, J H Kao. Underwater acoustic field and pressure fluctuation onshiphull due to unsteady propeller sheet cavitation. Journal of Marine Science and Technology, 2011, 16(3): 241–253.
R Jasionowski, D Zasada, W Przetakiewicz. Cavitation erosion resistance of alloys used in cathodic protection of hulls of ships. Archives of Metallurgy and Materials, 2014, 59(1): 241–245.
X B Zhang, C S Liu, X D Liu, et al. Cavitation erosion behavior of WC coatings on CrNiMo stainless steel by laser alloying. International Journal of Minerals Metallurgy and Materials, 2009, 16(2): 203–207.
L M Yang, A K Tieu, D P Dunne, et al. Cavitation erosion resistance of NiTi films produced by filtered arc deposition. Wear, 2009, 267(1–4): 233–243.
R Singh, S K Tiwari, S K Mishra. Cavitation erosion in hydraulic turbine components and mitigation by coatings: current status and future needs. Journal of Materials Engineering and Performance, 2012, 21(7): 1539–1551.
J Luo, Z B Cai, J L Mo, et al. Friction and wear properties of high-velocity oxygen fuel sprayed WC-17Co coating under rotational fretting conditions. Chinese Journal of Mechanical Engineering. 2016, 29(3): 515–521.
H J Kim, H S Yang, K H Baik. Development and properties of nanostructured thermal spray coatings. Current Applied Physics, 2006, 6(6): 1002–1006.
K S Zhou, C M Deng, M Liu, et al. Characterizations of fatigue and salt spray corrosion resistance of HVAF sprayed WC-17Co and WC-10Co4Cr coatings on the substrate of 300 M steel. Rare Metal Materials and Engineering, 2009, 38(4): 671–676.
R W Armstrongr. The hardness and strength properties of WC-Co composites. Materials, 2011, 4(7): 1287–1308.
A Ghabchi, T Varis, E Turunen, et al. Behavior of HVOF WC-10Co4Cr coatings with different carbide size in fine and coarse particle abrasion. Journal of Thermal Spray Technology, 2010, 19(1–2): 368–377.
N Ma, L Guo, Z X Cheng, et al. Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure. Applied Surface Science, 2014, 320: 364–371.
S F Scieska, K Filipowicz. An integrated testing method for cermet abrasion resistance and fracture toughness evaluation. Wear, 1998, 216(2): 202–212.
C J Li, A Ohmori, K Tani. Effect of WC particle on the abrasive wear of thermally sprayed WC-Co coatings. Materials and Manufacturing Processes, 1999, 14(2): 175–184.
M G Gee, A Gant, B Roebuck. Wear mechanism in abrasion and erosion of WC/Co and related hardmetals. Wear, 2007, 263: 137–148.
J M Guilemany, S Dosta, J R Miguel. The enhancement of the properties of WC-Co HVOF coatings through the use of nanostructured and microstructured feedstock powders. Surface and Coatings Technology. 2006, 201(3–4): 1180–1190.
W Tillmann, I Baumann, P S Hollingsworth, et al. Sliding and rolling wear behavior of HVOF-sprayed coatings derived from conventional, fine and nanostructured WC-12Co powders. Journal of Thermal Spray Technology, 2014, 23(1–2): 262–280.
S Hong, Y P Wu, J F Zhang, et al. Ultrasonic cavitation erosion of high-velocity oxygen-fuel (HVOF) sprayed near-nanostructured WC-10Co-4Cr coating in NaCl solution. Ultrasonics Sonochemistry, 2015, 26: 87–92.
X Q Zhao, H D Zhou, J M Chen. Comparative study of the friction and wear behavior of plasma sprayed conventional and nanostructured WC-12%Co coatings on stainless steel. Materials Science and Engineering A, 2006, 431(1–2): 290–297.
H Chen, G Q Gou, M J Tu, et al. Characteristics of nano particles and their effect on the formation of nanostructures in air plasma spraying WC-17Co coating. Surface and Coatings Technology, 2009, 203(13): 1785–1789.
A H Dent, S Depalo, S Sampath. Examination of the wear properties of HVOF sprayed nanostructured and conventional WC-Co cermets with different binder phase contents. Journal of Thermal Spray Technology, 2002, 11(4): 551–558.
Q Q Yang, T Senda, A Ohmori. Effect of carbide grain size on microstructure and sliding wear behavior of HVOF-sprayed WC-12%Co coatings. Wear, 2003, 254: 23–34.
G Skandan, R Yao, R Sadangi. Multimodal coatings: A new concept in thermal spraying. Journal of Thermal Spray Technology, 2000, 9(3): 329–331.
G C Ji, H T Wang, X Chen, et al. Characterization of cold-sprayed multimodal WC-12Co coating. Surface and Coatings Technology, 2013, 235: 536–543.
Q Wang, Z H Chen, L X Li, et al. The parameters optimization and abrasion wear mechanism of liquid fuel HVOF sprayed bimodal WC-12Co coating. Surface & Coatings Technology, 2012, 206(8–9): 2233–2241.
L Thakur, N Arora. A study on erosive wear behavior of HVOF sprayed nanostructured WC-CoCr coatings. Journal of Mechanical Science and Technology, 2013, 27(5): 1461–1467.
T Sahraoui, S Guessasma, M A Jeridane, et al. HVOF sprayed WC-Co coatings: Microstructure, mechanical properties and friction moment prediction. Materials and Design, 2010, 31(3): 1431–1437.
Q Wang, Z X Tang, L M Cha. Cavitation and sand slurry erosion resistances of WC-10Co-4Cr coatings. Journal of Materials Engineering and Performance, 2015, 246(6): 2435–2443.
S Hong, Y P Wu, J F Zhang, et al. Cavitation erosion behavior and mechanism of HVOF sprayed WC-10Co-4Cr coating in 3.5 wt% NaCl solution. Transactions of the Indian Institute of Metals, 2015, 68(1): 151–159.
Z X Ding, W Chen, Q Wang. Resistance of cavitation erosion of multimodal WC-12Co coatings sprayed by HVOF. Transactions of Nonferrous Metals Society of China, 2011, 21(10): 2231–2236.
S Hong, Y P Wu, J F Zhang, et al. Synergistic effect of ultrasonic cavitation erosion and corrosion of WC-CoCr and FeCrSiBMn coatings prepared by HVOF spraying. Ultrasonics Sonochemistry, 2016, 31: 563–569.
- Structure of Micro-nano WC-10Co4Cr Coating and Cavitation Erosion Resistance in NaCl Solution
- Chinese Mechanical Engineering Society
in-adhesives, MKVS, Zühlke/© Zühlke, Nordson/© Nordson, ViscoTec/© ViscoTec, Hellmich GmbH/© Hellmich GmbH