Skip to main content
Erschienen in: Cellulose 6/2019

09.03.2019 | Original Research

Structure–property relations in regenerated cellulose fibers: comparison of fibers manufactured using viscose and lyocell processes

verfasst von: Aakash Sharma, Shailesh Nagarkar, Shirish Thakre, Guruswamy Kumaraswamy

Erschienen in: Cellulose | Ausgabe 6/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Regenerated cellulose fibers are produced using two industrially dominant technologies: the viscose and lyocell processes. Here, we compare commercially available fibers, prepared using the viscose and lyocell processes. Single fibers are subjected to a variety of mechanical deformations to obtain stress–strain, stress relaxation and stress recovery data. These are fitted to a phenomenological model, whose parameters are interpreted in terms of the fiber semicrystalline microstructure. This simple model does not incorporate the complexities of semicrystalline microstructure. Rather, it represents structure in a semicrystalline polymer fiber in terms of an elastic crystalline phase that coexists with a viscoelastic Voigt-like glassy amorphous phase. Lyocell fibers are characterized by higher values of crystalline modulus relative to viscose. Lyocell fibers also have a higher amorphous phase modulus and a wider relaxation spectrum than viscose, suggesting that amorphous and crystalline phases are dispersed in close connectivity in lyocell. Viscose and lyocell fibers exhibit qualitative similarities in their mechanical response. On stretching, there is a transition in the stress–strain curve from a low strain elastic response at a critical value of strain. This critical strain has been incorrectly attributed to yielding of the fiber. We establish that this critical value corresponds to an apparent yield. When subjected to strains higher than this apparent yield point, the fibers develop a memory of the mechanical deformation. This memory decays slowly, logarithmically with time and is lost over about a day as the fiber structure transitions back to the original as spun fiber. Finally, we demonstrate that on wetting the fibers with water, there is an increase in the apparent yield strain for viscose fibers, but not for lyocell. We interpret these results in terms of the semicrystalline microstructure of the fibers.

Graphical abstract

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Literatur
Zurück zum Zitat Abu-Rous M, Ingolic E, Schuster KC (2006) Visualisation of the nano-structure of Tencel®(lyocell) and Other cellulosics as an approach to explaining functional and wellness properties in textiles. Lenzing Ber 85:31–37 Abu-Rous M, Ingolic E, Schuster KC (2006) Visualisation of the nano-structure of Tencel®(lyocell) and Other cellulosics as an approach to explaining functional and wellness properties in textiles. Lenzing Ber 85:31–37
Zurück zum Zitat Rous MA, Manian AP, Röder T, Lichtscheidl I, Schuster KC (2004) Fluoresent molecular probes for the characterization of fibre structure and distribution of textile resin finishing on lyocell. Lenzing Ber 83:92–98 Rous MA, Manian AP, Röder T, Lichtscheidl I, Schuster KC (2004) Fluoresent molecular probes for the characterization of fibre structure and distribution of textile resin finishing on lyocell. Lenzing Ber 83:92–98
Zurück zum Zitat Sakurada I, Ito T, Nakamae K (1964) Elastic moduli of polymer crystals for the chain axial direction. Die Makromol Chem 75:1–10CrossRef Sakurada I, Ito T, Nakamae K (1964) Elastic moduli of polymer crystals for the chain axial direction. Die Makromol Chem 75:1–10CrossRef
Zurück zum Zitat Schuster KC, Aldred P, Villa M, Baron M, Loidl R, Biganska O, Patlazhan S, Navard P, Rüf H, Jericha E (2003) Characterising the emerging lyocell fibres structures by ultra small angle neutron scattering (USANS). Lenzing Ber 82:107–117 Schuster KC, Aldred P, Villa M, Baron M, Loidl R, Biganska O, Patlazhan S, Navard P, Rüf H, Jericha E (2003) Characterising the emerging lyocell fibres structures by ultra small angle neutron scattering (USANS). Lenzing Ber 82:107–117
Zurück zum Zitat Woodings C (2001) Regenerated cellulose fibres. Woodhead Publishing, CambridgeCrossRef Woodings C (2001) Regenerated cellulose fibres. Woodhead Publishing, CambridgeCrossRef
Zurück zum Zitat Zhang S, Wang W, Li F, Yu J (2013) Non-linear viscoelastic behavior of novel regenerated cellulose fiber in dry and wet condition. Cellul Chem Technol 47:353–358 Zhang S, Wang W, Li F, Yu J (2013) Non-linear viscoelastic behavior of novel regenerated cellulose fiber in dry and wet condition. Cellul Chem Technol 47:353–358
Zurück zum Zitat Zhang S, Chen C, Duan C, Hu H, Li H (2018) Regenerated cellulose by the lyocell process, a brief review of the process and properties. BioResources 13(2):4577–4592 Zhang S, Chen C, Duan C, Hu H, Li H (2018) Regenerated cellulose by the lyocell process, a brief review of the process and properties. BioResources 13(2):4577–4592
Zurück zum Zitat Zhou S, Tashiro K, Hongo T, Shirataki H, Yamane C, Ii T (2001) Influence of water on structure and mechanical properties of regenerated cellulose studied by an organized combination of infrared spectra, X-ray diffraction, and dynamic viscoelastic data measured as functions of temperature and humidity. Macromolecules 34:1274–1280. https://doi.org/10.1021/ma001507x CrossRef Zhou S, Tashiro K, Hongo T, Shirataki H, Yamane C, Ii T (2001) Influence of water on structure and mechanical properties of regenerated cellulose studied by an organized combination of infrared spectra, X-ray diffraction, and dynamic viscoelastic data measured as functions of temperature and humidity. Macromolecules 34:1274–1280. https://​doi.​org/​10.​1021/​ma001507x CrossRef
Metadaten
Titel
Structure–property relations in regenerated cellulose fibers: comparison of fibers manufactured using viscose and lyocell processes
verfasst von
Aakash Sharma
Shailesh Nagarkar
Shirish Thakre
Guruswamy Kumaraswamy
Publikationsdatum
09.03.2019
Verlag
Springer Netherlands
Erschienen in
Cellulose / Ausgabe 6/2019
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI
https://doi.org/10.1007/s10570-019-02352-w

Weitere Artikel der Ausgabe 6/2019

Cellulose 6/2019 Zur Ausgabe