Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2021 | OriginalPaper | Buchkapitel

Study of Static Performance Characteristics of Offset-Pressure Dam Bearing Considering Turbulent and Adiabatic Thermal Effects

verfasst von: Sivakumar Dakshinamurthi, Suresh Nagesh

Erschienen in: Proceedings of the 6th National Symposium on Rotor Dynamics

Verlag: Springer Singapore

share
TEILEN

Abstract

As there is an increasing demand for high-performance turbo-machinery, hydrodynamic bearings are expected to run at high surface speed (>100 m/s) and heavy load (>4 MPa) operating conditions. Especially, high-speed and high-power gearboxes operate at such severe operating conditions for gas or steam turbine power generation applications. Conventionally, fixed profile bearings such as pressure dam or offset bearings are used in these gearboxes. However, they have design limitation on maximum surface speed due to stability requirements at no load conditions and maximum oil film temperature at heavy load and high-speed conditions. In this paper, it is attempted to combine the offset design feature “preload” with pressure dam bearings to see that if the operational design limits could be improved. The governing mathematical model includes turbulent and adiabatic thermal effects. The static performance characteristics of combined offset pressure dam bearings are compared with individual bearings. The analytical study found that combined offset pressure dam bearing delivers better performance than the other bearings. Also, the analytical model is validated with published experimental results.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat He M, Cloud CH, Byrne JM. and Vázquez JA (2016) Fundamentals of fluid film journal bearing operation and modeling. In Asia turbomachinery and pump symposium 2016 proceedings, Texas A&M University He M, Cloud CH, Byrne JM. and Vázquez JA (2016) Fundamentals of fluid film journal bearing operation and modeling. In Asia turbomachinery and pump symposium 2016 proceedings, Texas A&M University
2.
Zurück zum Zitat Elrod H, Ng C (1967) A theory for turbulent fluid films and its application to bearings. ASME J Lubric Technol 89(3):346–362 CrossRef Elrod H, Ng C (1967) A theory for turbulent fluid films and its application to bearings. ASME J Lubric Technol 89(3):346–362 CrossRef
3.
Zurück zum Zitat McCallion H, Yousif F, Lloyd T (1970) The analysis of thermal effects in a full journal bearing. ASME J Lubric Technol 92(4):578–587 CrossRef McCallion H, Yousif F, Lloyd T (1970) The analysis of thermal effects in a full journal bearing. ASME J Lubric Technol 92(4):578–587 CrossRef
4.
Zurück zum Zitat Safar Z, Szeri AZ (1974) Thermo hydro-dynamic lubrication in laminar and turbulent regimes. ASME J Lubric Tech 96(1):48–56 CrossRef Safar Z, Szeri AZ (1974) Thermo hydro-dynamic lubrication in laminar and turbulent regimes. ASME J Lubric Tech 96(1):48–56 CrossRef
5.
Zurück zum Zitat Boncompain R, Frene J (1983) A study of the thermo hydrodynamic performance of a plain journal bearing comparison between theory and experiments. ASME J Lubric Tech 105(3):422–428 CrossRef Boncompain R, Frene J (1983) A study of the thermo hydrodynamic performance of a plain journal bearing comparison between theory and experiments. ASME J Lubric Tech 105(3):422–428 CrossRef
6.
Zurück zum Zitat Mittwollen N, Glienicke J (1990) Operating conditions of multi-lobe journal bearings under high thermal loads. ASME J Tribol 112(2):330–338 CrossRef Mittwollen N, Glienicke J (1990) Operating conditions of multi-lobe journal bearings under high thermal loads. ASME J Tribol 112(2):330–338 CrossRef
7.
Zurück zum Zitat Khonsari MM (1987) A review of thermal effects in hydrodynamic bearings, Part II. J Bear ASLE Trans 30(1):26–33 CrossRef Khonsari MM (1987) A review of thermal effects in hydrodynamic bearings, Part II. J Bear ASLE Trans 30(1):26–33 CrossRef
8.
Zurück zum Zitat Zhang C, Yi Z, Zhang Z (2000) THD analysis of high speed heavily loaded journal bearings including thermal deformation, mass conserving cavitation, and turbulent effects. ASME J Tribol 122(3):597–602 CrossRef Zhang C, Yi Z, Zhang Z (2000) THD analysis of high speed heavily loaded journal bearings including thermal deformation, mass conserving cavitation, and turbulent effects. ASME J Tribol 122(3):597–602 CrossRef
9.
Zurück zum Zitat Ji F, Guo Y, Yuan X, Yang L, Zhao W (2009) Turbulent model analysis and experimental research for lubrication performance of large power units journal bearing. In ICIEA 2009 4th IEEE conference, pp 206–210 Ji F, Guo Y, Yuan X, Yang L, Zhao W (2009) Turbulent model analysis and experimental research for lubrication performance of large power units journal bearing. In ICIEA 2009 4th IEEE conference, pp 206–210
10.
Zurück zum Zitat Wilcock D, Booser E (1957) Bearing design and application. McGraw-Hill, New York Wilcock D, Booser E (1957) Bearing design and application. McGraw-Hill, New York
11.
Zurück zum Zitat Allaire PE, Nicholas JC, Barrett LE (1979) Analysis of step journal bearings—infinite length, inertia effects. ASLE Trans 22(4):333–341 CrossRef Allaire PE, Nicholas JC, Barrett LE (1979) Analysis of step journal bearings—infinite length, inertia effects. ASLE Trans 22(4):333–341 CrossRef
12.
Zurück zum Zitat Nicholas J, Allaire P (1979) Analysis of step journal bearings—finite length stability. ASLE Trans 22:197–207 CrossRef Nicholas J, Allaire P (1979) Analysis of step journal bearings—finite length stability. ASLE Trans 22:197–207 CrossRef
13.
Zurück zum Zitat Nicholas J, Allaire P, Lewis D (1980) Stiffness and damping coefficients for finite length step journal bearings. ASLE Trans 23:353–362 CrossRef Nicholas J, Allaire P, Lewis D (1980) Stiffness and damping coefficients for finite length step journal bearings. ASLE Trans 23:353–362 CrossRef
14.
Zurück zum Zitat Nicholas J, He M, Allaire P, Cloud CH (2004) A pressure dam bearing analysis with adiabatic thermal effects. ASLE Trans 47(1):70–76 Nicholas J, He M, Allaire P, Cloud CH (2004) A pressure dam bearing analysis with adiabatic thermal effects. ASLE Trans 47(1):70–76
15.
Zurück zum Zitat Mehta N (1993) Static and dynamic characteristics of orthogonally displaced pressure dam bearings. Tribol Trans 36(2):201–206 MathSciNetCrossRef Mehta N (1993) Static and dynamic characteristics of orthogonally displaced pressure dam bearings. Tribol Trans 36(2):201–206 MathSciNetCrossRef
16.
Zurück zum Zitat Mehta NP, Singh A (1986) Stability analysis of finite offset halves pressure dam bearing. ASME J Tribol 108(2):270–274 CrossRef Mehta NP, Singh A (1986) Stability analysis of finite offset halves pressure dam bearing. ASME J Tribol 108(2):270–274 CrossRef
17.
Zurück zum Zitat Sneck HJ, Vohr JH (1984) Hydrodynamic lubrication. Handbook of lubrication, vol. 2. CRC Press Sneck HJ, Vohr JH (1984) Hydrodynamic lubrication. Handbook of lubrication, vol. 2. CRC Press
18.
Zurück zum Zitat Ronan J, Shoup T, Perney G, Robertson C, Quoix B, Gelin A (2015) High performance bearing comparison. In Proceedings of 44th turbomachinery symposium, Texas A&M University, Turbomachinery laboratory Ronan J, Shoup T, Perney G, Robertson C, Quoix B, Gelin A (2015) High performance bearing comparison. In Proceedings of 44th turbomachinery symposium, Texas A&M University, Turbomachinery laboratory
Metadaten
Titel
Study of Static Performance Characteristics of Offset-Pressure Dam Bearing Considering Turbulent and Adiabatic Thermal Effects
verfasst von
Sivakumar Dakshinamurthi
Suresh Nagesh
Copyright-Jahr
2021
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-5701-9_20

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.