nach oben

Journal of Materials Engineering and Performance

Erschienen in:

20.06.2017

Study on Microtexture and Martensite Formation of Friction Stir Lap-welded DP 590 Steel within A₁ to A₃ Temperature Range

verfasst von: Hrishikesh Das, Kwang-Jin Lee, Sung-Tae Hong

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Friction stir lap welding of dual phase 590 steel has been successfully performed within the A₁ to A₃ temperature range upon adjusting the process parameters. The microstructures and the texture have been characterized using scanning electron microscopy and electron back scattered diffraction analysis. The martensite volume fraction increases with an increasing travel speed from 100 to 300 mm/min for a constant tool rotational speed of 300 rpm. Under severe deformation and high strain rate during friction stir welding, the grain orientation 〈101〉 shifts toward the 〈111〉 and 〈001〉 directions compared to the base metal. The base metal shows γ fiber components, whereas the friction stir welded specimen shows strong brass with weak cube fibers.

Vorheriger Artikel Surface Characteristics of Machined NiTi Shape Memory Alloy: The Effects of Cryogenic Cooling and Preheating Conditions

Nächster Artikel Effect of Surface Roughness of an Electropolished Aluminum Substrate on the Thickness, Morphology, and Hardness of Aluminum Oxide Coatings Formed During Anodization in Oxalic Acid

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R.G. Davies, The Deformation Behavior of a Vanadium-strengthened Dual Phase Steel, Metall. Trans., 1978, 9A, p 41–52CrossRef

G. Thomas, J.Y. Koo, R.A. Kot, and J.W. Morris, Structure and Properties of Dual-phase Steels, TMS-AIME, Warrendale, 1979, p 183

S.K. Paul, Real Microstructure Based Micromechanical Model to Simulate Microstructural Level Deformation Behavior and Failure Initiation in DP 590 Steel, Mater. Des., 2013, 44, p 397–406CrossRef

S.K. Paul, Effect of Martensite Volume Fraction on Stress Triaxiality and Deformation Behavior of Dual Phase Steel, Mater. Des., 2013, 50, p 782–789CrossRef

R. Sarkar, S. Sengupta, T.K. Pal, and M. Shome, Microstructure and Mechanical Properties of Friction Stir Spot-Welded IF/DP Dissimilar Steel Joints, Metall. Mater. Trans. A, 2015, 46A, p 5182–5200CrossRef

M. Erdogan and S. Tekeli, The Effect of Martensite Particle Size on Tensile Fracture of Surface Carburised AISI, 8620 Steel with DUAL Phase Core Microstructure, Mater. Des., 2002, 23(7), p 597–604CrossRef

A. Bag, K.K. Ray, and E.S. Dwarakadasa, Influence of Martensite Content and Morphology on Tensile and Impact Properties of High-martensite Dual-phase Steels, Metall. Trans., 1999, 30, p 1193–1202CrossRef

C. Lanzillotto and F.B. Pickering, Structure Property Relationship in Dual Phase Steels, Metal Sci., 1982, 16, p 371–382CrossRef

H. Ghadbeigi, C. Pinna, S. Celotto, and J.R. Yates, Local Plastic Strain Evolution in a High Strength Dual-phase Steel, Mater. Sci. Eng. A, 2010, 527, p 5026–5032CrossRef

10.

F.M. Al-Abbasi and J.A. Nemes, Micromechanical Modeling of Dual Phase Steels, Int. J. Mech. Sci., 2003, 45(9), p 1449–14465CrossRef

11.

M. Mazinani and W.J. Poole, Effect of Martensite Plasticity on the Deformation Behavior of a Low-Carbon Dual-Phase Steel, Metall. Trans., 2007, 38A, p 328–335CrossRef

12.

F.B. Pickering, Advances in the Physical Metallurgy and Applications of Steels. Springer; 5–25 (1981).

13.

T.B. Hilditch, J.G. Speer, and D.K. Matlock, Effect of Susceptibility to Interfacial Fracture on Fatigue Properties of Spot-welded High Strength Sheet Steel, Mater. Des., 2007, 28, p 2566–2576CrossRef

14.

M. Pouranvari and S.P.H. Marashi: Sci. Technol. Critical Review of Automotive Steels Spot Welding: Process, Structure and Properties, Weld. Join. 2013, 18, p 361–403.

15.

X. Sun, E.V. Stephens, and M.A. Khaleel, Eng. Effects of Fusion Zone Size and Failure Mode on Peak Load and Energy Absorption of Advanced High Strength Steel Spot Welds Under Lap Shear Loading Conditions Fail. Anal. 15, (2008), p 356–367.

16.

S. Ferrasse, P. Verrier, and F. Meesemaecker, Resistance spot Weldability of High Strength Steels for Use in Car Industry, Weld. World, 1998, 41, p 177–195

17.

K. Yamazaki, K. Sato, and Y. Tokunaga, Static and Fatigue Strength of Spot Welded Joints in Ultra-high-strength, Cold-rolled steel Sheets, Weld. Int., 2000, 14, p 533–541CrossRef

18.

M. Pouranvari, S.M. Mousavizadeh, S.P.H. Marashi, M. Goodarzi, and M. Ghorbani, Influence of Fusion Zone Size and Failure Mode on Mechanical Performance of Dissimilar Resistance Spot Welds of AISI, 1008 Low Carbon Steel and DP600 Advanced High Strength Steel, Mater. Des., 2011, 32, p 1390–1398CrossRef

19.

W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, C.J. Dawes, “Friction Stir Butt Welding,” Int. Patent App. PCT/GB92/02203 and G.B. Patent App. 9125978.8. (1991).

20.

M. Santella, Y. Hovanski, A. Frederick, G. Grant, and M. Dahl, Friction Stir Spot Welding of DP780 Carbon Steel, Sci. Technol. Weld. Join., 2010, 15, p 271–278CrossRef

21.

Z. Feng, M.L. Santella, S.A. David, R.J. Steel, S.M. Packer, T. Pan, M. Kuo, and R.S. Bhatnagar, Friction Stir Spot Welding of Advanced High-Strength Steels—A Feasibility Study, SAE Technical Series, 2005, 01, p 1248

22.

Y. Hovanski, M.L. Santella, and G.J. Grant, Friction Stir Spot Welding of Hot-stamped Boron Steel, Scr. Mater., 2007, 57, p 873–876CrossRef

23.

K. Aota and K. Ikeuchi, Development of Friction Stir Spot Welding Using Rotating Tool Without Probe and its Application to Low-carbon Steel Plates, Weld. Int., 2009, 23, p 572–580CrossRef

24.

M.I. Khan, M.L. Kuntz, P. Su, A. Gerlich, T. North, and Y. Zhou, Resistance and Friction Stir Spot Welding of DP600: A Comparative Study, Sci. Technol. Weld. Join., 2007, 12, p 175–182CrossRef

25.

R. Ohashi, M. Fujimoto, S. Mironov, Y.S. Sato, and H. Kokawa, Effect of Contamination on Microstructure in Friction Stir Spot Welded DP590 Steel, Sci. Technol. Weld. Join., 2009, 14, p 221–227CrossRef

26.

M.P. Miles, C.S. Ridges, Y. Hovanski, J. Peterson, M.L. Santella, and R. Steel, Impact of Tool Wear on Joint Strength in Friction Stir Spot Welding of DP 980 Steel, Sci. Technol. Weld. Join., 2011, 16, p 642–647CrossRef

27.

Y.D. Chung, H. Fujii, R. Ueji, and N. Tsuji, Friction Stir Welding of High Carbon Steel with Excellent Toughness and Ductility, Scr. Mater., 2010, 63, p 223–226CrossRef

28.

A.P. Reynolds, W. Tang, T. Gnaupel-Herold, and H. Prask, Structure, Properties, and Residual stress of 304L Stainless Steel Friction Stir Welds, Scr. Mater., 2003, 48, p 1289–1294CrossRef

29.

M. Ghosh, K. Kumar, and R.S. Mishra, Friction Stir Lap Welded Advanced High Strength Steels: Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2011, 528, p 8111–8119CrossRef

30.

R. Sarkar, T.K. Pal, and M. Shome, Friction Stir Spot Welding of Dual Phase Steel Sheet, Sci. Technol. Weld. Join., 2014, 19, p 436–442CrossRef

31.

M.P. Miles, T.W. Nelson, R. Steel, E. Olsen, and M. Gallagher, Effect of Friction Stir Welding Conditions on Properties and Microstructures of High Strength Automotive Steel, Sci. Technol. Weld. Join., 2009, 14(3), p 228–232CrossRef

32.

M. Matsushita, Y. Kitani, R. Ikeda, M. Ono, H. Fuji, and Y.D. Chung, Development of Friction Stir Welding of High Strength Steel Sheet, Sci. Technol. Weld. Join., 2011, 16(2), p 181–187CrossRef

33.

P. Xue, Y. Komizo, R. Ueji, and H. Fujii, Enhanced Mechanical Properties in Friction Stir Welded Low Alloy Steel Joints via Structure Refining, Mater. Sci. Eng. A, 2014, 606, p 322–329CrossRef

34.

P. Xue, Z.Y. Ma, Y. Komizo, and H. Fujii, Achieving Ultra Fine-grained Ferrite Structure in frictIon Stir Processed Weld Metal, Mater. Lett., 2016, 162, p 161–164CrossRef

35.

Majid Abbasi, Tracy W. Nelson, and Carl D. Sorensen, Transformation and Deformation Texture Study in Friction Stir Processed API, X80 Pipeline Steel, Metall. Mater. Trans. A, 2012, 43A, p 4940–4946CrossRef

36.

Y.S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan, and T. Hashimoto, Metall. Mater. Trans. A, 2001, 32A, p 941–948CrossRef

37.

B.D. Nelson: Using Design of Experiments and Electron Backscatter Diffraction to Model Extended Plasticity Mechanisms in Friction Stir Welded AISI 304L Stainless Steel, Master’s thesis, Brigham Young University, Fall 2010.

38.

D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata, Heterogeneity of Crystallographic Texture in Friction Stir Welds of Aluminum, Metall. Mater. Trans. A, 2001, 32A, p 2869–2877CrossRef

39.

I.L. Dillamore and H. Katoh, A comparison of the Observed and Predicted Deformation Textures in Cubic Metals, Met. Sci., 1974, 8, p 21–27CrossRef

40.

I.L. Dillamore and H. Katoh, The Mechanism of Recrystallization in Cubic Metals with Particular Reference to Their Orientation Dependence, Met. Sci., 1974, 8, p 73–83CrossRef

41.

D.H. Kim, S.J. Kim, S.H. Kim, A.D. Rollett, K.H. Oh, and H.N. Han, Micro Texture Development During Equibiaxial Tensile Deformation in Monolithic and Dual Phase Steels, Acta Mater., 2011, 59, p 5462–5471CrossRef

42.

N. Jia, Z.H. Cong, X. Sun, S. Cheng, Z.H. Nie, and Y. Ren, An in Situ High-energy X-ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Advanced High-strength Steels, Acta Mater., 2009, 57, p 3965–3977CrossRef

43.

J.D. Kang, Y. Ososkov, J.D. Embury, and D.S. Wilkinson, Digital Image Correlation Studies for Microscopic Strain Distribution and Damage in Dual Phase Steels, Scr. Mater., 2007, 56, p 999–1006CrossRef

44.

Z.H. Cong, N. Jia, X. Sun, Y. Ren, J. Almer, and Y.D. Wang, Stress and Strain Partitioning of Ferrite and Martensite during Deformation, Metall. Mater. Trans. A, 2009, 40A, p 1383–1389CrossRef

45.

Y. Tomita, Effect of Morphology of Second-phase Martensite on Tensile Properties of Fe-0.1C Dual Phase Steels, J. Mater. Sci., 1990, 25, p 5179–5184CrossRef

46.

T.S. Byun and I.S. Kim, Tensile Properties and Inhomogeneous Deformation of Ferrite-martensite Dual-phase Steels, J. Mater. Sci., 1993, 28, p 2923–2932CrossRef

Titel: Study on Microtexture and Martensite Formation of Friction Stir Lap-welded DP 590 Steel within A1 to A3 Temperature Range
verfasst von: Hrishikesh Das
Kwang-Jin Lee
Sung-Tae Hong
Publikationsdatum: 20.06.2017
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 7/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2780-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2017

Characterization and Formability of Titanium/Aluminum Laminate Composites Fabricated by Hot Pressing

Influence of Strain Rate, Microstructure and Chemical and Phase Composition on Mechanical Behavior of Different Titanium Alloys

Mechanical Properties and Microstructure of Mg-SiCp Composite Sheets Fabricated by Sintering and Warm Rolling

Study on Evolution of Coating State and Role of Graphene in Graphene-Modified Low-Zinc Waterborne Epoxy Anticorrosion Coating by Electrochemical Impedance Spectroscopy

Effect of Cooling Rate on Microstructure and Mechanical Properties of Eutectoid Steel Under Cyclic Heat Treatment

A Bottom-Up Optimization Approach for Friction Stir Welding Parameters of Dissimilar AA2024-T351 and AA7075-T651 Alloys

Premium Partner

Marktübersichten