nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Study the Effect of Mill Scale Filler on Mechanical Properties of Bidirectional Carbon Fibre-Reinforced Polymer Composite

verfasst von : Aman Soni, Amar Patnaik

Erschienen in: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, the effect of mill scale as the filler with different weight percentage in carbon fibre reinforced polymer composites is investigated. The composites are fabricated with 0, 5 and 10 wt% of mill scale, respectively, using hand lay-up method. The mechanical performance of the composites is evaluated by tensile test, flexural test, inter-laminar shear stress and micro-Vickers hardness test. It is observed that incorporation of mill scale in composite increases the tensile strength by 2.40% (5 wt%) and 4.73% (10 wt%); flexural strength by 35.34% (5 wt%) and by 17.78% (10 wt%); ILSS by 44.40% (5 wt%) and 41.45% (10 wt%); hardness by 14.70% (5 wt%) and by 25.49% (10 wt%). The results reveal that mill scale as filler in composite significantly affects the mechanical properties. This work may provide a meaningful way to modify the conventional manufacturing methods in various industrial applications of CFRPs.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Drag Reduction for Flow Past a Square Cylinder Using Rotating Control Cylinders—A Numerical Simulation

Nächstes Kapitel Study on Carbon, Glass, and Flax Hybrid Composites Using Experimental and Computational Techniques

Lee, E.S., Lee, C.H., Chun, Y.S., Han, C.J., Lim, D.S.: Effect of hydrogen plasma-mediated surface modification of carbon fibers on the mechanical properties of carbon-fiber-reinforced polyetherimide composites. Compos. Part B (2016). https://doi.org/10.1016/j.compositesb.2016.10.088CrossRef

Jeon, S.K., Kwon, O.H., Jang, H.S., Ryu, K.S., Nahm, S.N.: Effect of high pressure hydrogen on the mechanical characteristics of single carbon fiber. Appl. Surf. Sci. (2017). https://doi.org/10.1016/j.apsusc.2017.07.005CrossRef

Baklanova, N.I., Lozanov, V.V., Morozova, N.B., Titov, A.T.: The effect of heat treatment on tensile strength of iridium-coated carbon fiber. Thin Solid Films (2015). https://doi.org/10.1016/j.tsf.2015.02.042CrossRef

Fan, W., Wang, Y., Wang, C., Chen, J., Wang, Q., Yuan, Y., Niu, F.: High efficient preparation of carbon nanotube-grafted carbon fibers with the improved tensile strength, Appl. Surf. Sci. https://doi.org/10.1016/j.apsusc.2015.12.189CrossRef

Sun, J., Zhao, F., Yao, Y., Jin, Z., Liu, X., Huang, Y.: High efficient and continuous surface modification of carbon fibers with improved tensile strength and interfacial adhesion. Appl. Surf. Sci. (2017). https://doi.org/10.1016/j.apsusc.2017.03.279CrossRef

Hung, P.Y., Lau, K.T., Fox, B., Hameed, N., Lee, J.H., Hui, D.: Surface modification of carbon fibre using graphene-related materials for multifunctional composites. Compos. B (2017). https://doi.org/10.1016/j.compositesb.2017.09.010CrossRef

Sun, J., Li, H., Feng, L., Jia, Y., Song, Q., Li, K.: A novel treatment of carbon fibers with improving tensile strength to synthesize evenly distributed carbon nanotubes on their surface. Appl. Surf. Sci. (2017). https://doi.org/10.1016/j.apsusc.2017.01.165CrossRef

Dong, J., Jia, C., Wang, M., Fang, X., Wei, H., Xie, H., Zhang, T., He, J., Jiang, Z., Huang, Y.: Improved mechanical properties of carbon fiber-reinforced epoxy composites by growing carbon black on carbon fiber surface. Compos. Sci. Technol. (2017). https://doi.org/10.1016/j.compscitech.2017.06.002CrossRef

Wang, C., Li, J., Yu, J., Sun, S., Li, X., Xie, F., Jiang, B., Wu, G., Yu, F., Huang, Y.: Grafting of size-controlled graphene oxide sheets onto carbon fiber for reinforcement of carbon fiber/epoxy composite interfacial strength. Compos.: Part A. https://doi.org/10.1016/j.compositesa.2017.07.015CrossRef

10.

Sun, J., Zhao, F., Yao, Y., Liu, X., Jin, Z., Huang, Y.: A two-step method for high efficient and continuous carbon fiber treatment with enhanced fiber strength and interfacial adhesion. Mater. Lett. (2017). https://doi.org/10.1016/j.matlet.2017.03.007CrossRef

11.

Jiang, J., Yao, X., Xu, C., Su, Y., Zhou, L., Deng, C.: Influence of electrochemical oxidation of carbon fiber on the mechanical properties of carbon fiber/graphene oxide/epoxy composites. Compos.: Part A (2017). https://doi.org/10.1016/j.compositesa.2017.02.004CrossRef

12.

Ma, Q., Gu, Y., Li, M., Wang, S., Zhang, Z.: Effects of surface treating methods of high-strength carbon fibers on interfacial properties of epoxy resin matrix composite. Appl. Surf. Sci. (2016). https://doi.org/10.1016/j.apsusc.2016.04.075CrossRef

13.

Cole, D.P., Henry, T.C., Gardea, F., Haynes, R.A.: Interphase mechanical behavior of carbon fiber reinforced polymer exposed to cyclic loading. Compos. Sci. Technol. (2017). https://doi.org/10.1016/j.compscitech.2017.08.012CrossRef

14.

Wang, C., Chen, L., Li, J., Sun, S., Ma, L., Wu, G., Zhao, F., Jiang, B., Huang, Y.: Enhancing the interfacial strength of carbon fiber reinforced epoxy composites by green grafting of Poly(oxypropylene) Diamines. Compos. Part: A (2017). https://doi.org/10.1016/j.compositesa.2017.04.003CrossRef

15.

Zhang, R.L., Gao, B., Ma, Q.H., Zhang, J., Cui, H.Z., Liu, L.: Directly grafting graphene oxide onto carbon fiber and the effect on the mechanical properties of carbon fiber composites. Mater. Des. (2016). https://doi.org/10.1016/j.matdes.2016.01.003CrossRef

16.

Song, S.A., Lee, C.K., Bang, Y.H., Kim, S.S.: A novel coating method using zinc oxide nanorods to improve the interfacial shear strength between carbon fiber and a thermoplastic matrix. Compos. Sci. Technol. (2016). https://doi.org/10.1016/j.compscitech.2016.08.012CrossRef

17.

Feng, L., Li, K., Xue, B., Fu, Q., Zhang, L.: Optimizing matrix and fiber/matrix interface to achieve combination of strength, ductility and toughness in carbon nanotube-reinforced carbon/carbon composites (2017)

18.

Ozdemir, N.G., Zhang, T., Aspin, I., Scarpa, F., Hadavinia, H., Song, Y.: Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications. eXPRESS Polym. Lett. 10 (2016). https://doi.org/10.3144/expresspolymlett.2016.37CrossRef

19.

Yamamoto, T., Makino, Y., Uematsu, K.: Improved mechanical properties of PMMA composites: dispersion, diffusion and surface adhesion of recycled carbon fiber fillers from CFRP with adsorbed particulate PMMA. Adv. Powder Technol. (2017). https://doi.org/10.1016/j.apt.2017.08.003CrossRef

20.

Gonçalez, V., Barcia, F.L., Soares, B.G.: Composite materials based on modified epoxy resin and carbon fiber. J. Braz. Chem. Soc. 17(6), 1117–1123 (2006)CrossRef

21.

Danni, N., Sasikumar, T., Karthikeyan, M., Vimal, S.: Mechanical properties of CFRP composite with carbon nano fiber inclusion. Int. J. Adv. Res. Manage. Architect. Technol. Eng. (IJARMATE)

22.

Li, Y., Zhang, H., Huang, Z., Bilotti, E., Peijs, T.: Graphite nanoplatelet modified epoxy resin for carbon fibre reinforced plastics with enhanced properties. Hindawi J. Nanomater. (2017). https://doi.org/10.1155/2017/5194872CrossRef

23.

Liu, F., Deng, S., Zhang, J.: Mechanical properties of epoxy and its carbon fiber composites modified by nanoparticles. Hindawi J. Nanomater. (2017). https://doi.org/10.1155/2017/8146248CrossRef

24.

Gemi, L., Yazman, S., Uludağ, M., Dispinar, D., Tiryakioğlu, M.: The effect of 0.5 wt% additions of carbon nanotubes and ceramic nanoparticles on tensile properties of epoxy-matrix composites: a comparative study. Mater. Sci Nanotechnol.

25.

Carolan, D., Ivankovic, A., Kinloch, A.J., Sprenger, S., Taylor, A.C.: Toughened carbon fibre-reinforced polymer composites with nanoparticle-modified epoxy matrices. Springer (2016). https://doi.org/10.1007/s10853-016-0468-5CrossRef

Titel: Study the Effect of Mill Scale Filler on Mechanical Properties of Bidirectional Carbon Fibre-Reinforced Polymer Composite
verfasst von: Aman Soni
Amar Patnaik
Verlag: Springer Singapore
Buch: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
Print ISBN: 978-981-13-2717-9

Electronic ISBN: 978-981-13-2718-6

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-13-2718-6_13

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht