nach oben

Journal of Intelligent Manufacturing

Erschienen in:

18.11.2019

Support vector machines based non-contact fault diagnosis system for bearings

verfasst von: Deepam Goyal, Anurag Choudhary, B. S. Pabla, S. S. Dhami

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 5/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Bearing defects have been accepted as one of the major causes of failure in rotating machinery. It is important to identify and diagnose the failure behavior of bearings for the reliable operation of equipment. In this paper, a low-cost non-contact vibration sensor has been developed for detecting the faults in bearings. The supervised learning method, support vector machine (SVM), has been employed as a tool to validate the effectiveness of the developed sensor. Experimental vibration data collected for different bearing defects under various loading and running conditions have been analyzed to develop a system for diagnosing the faults for machine health monitoring. Fault diagnosis has been accomplished using discrete wavelet transform for denoising the signal. Mahalanobis distance criteria has been employed for selecting the strongest feature on the extracted relevant features. Finally, these selected features have been passed to the SVM classifier for identifying and classifying the various bearing defects. The results reveal that the vibration signatures obtained from developed non-contact sensor compare well with the accelerometer data obtained under the same conditions. A developed sensor is a promising tool for detecting the bearing damage and identifying its class. SVM results have established the effectiveness of the developed non-contact sensor as a vibration measuring instrument which makes the developed sensor a cost-effective tool for the condition monitoring of rotating machines.

Vorheriger Artikel An intelligent decision support system for production planning based on machine learning

Nächster Artikel A novel learning-based feature recognition method using multiple sectional view representation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ali, J. B., Fnaiech, N., Saidi, L., Chebel-Morello, B., & Fnaiech, F. (2015). Application of empirical mode decomposition and artificial neural network for automatic bearing fault diagnosis based on vibration signals. Applied Acoustics, 89, 16–27.

Chen, F., Tang, B., Song, T., & Li, L. (2014). Multi-fault diagnosis study on roller bearing based on multi-kernel support vector machine with chaotic particle swarm optimization. Measurement, 47, 576–590.

Choudhary, A., Goyal, D., Shimi, S. L., & Akula, A. (2019). Condition monitoring and fault diagnosis of induction motors: A review. Archives of Computational Methods in Engineering, 26(4), 1221–1238.

Cristianini, N., & Shawe-Taylor, J. (2000). An Introduction to Support Vector Machines. Cambridge, UK: Cambridge Univ. Press.

Gangsar, P., & Tiwari, R. (2017). Comparative investigation of vibration and current monitoring for prediction of mechanical and electrical faults in induction motor based on multiclass-support vector machine algorithms. Mechanical Systems and Signal Processing, 94, 464–481.

Glowacz, A. (2019). Fault diagnosis of single-phase induction motor based on acoustic signals. Mechanical Systems and Signal Processing, 117, 65–80.

Goyal, D., & Pabla, B. (2015). Condition based maintenance of machine tools—A review. CIRP Journal of Manufacturing Science and Technology, 10, 24–35.

Goyal, D., & Pabla, B. (2016a). The vibration monitoring methods and signal processing techniques for structural health monitoring: A review. Archives of Computational Methods in Engineering, 23(4), 585–594.

Goyal, D., & Pabla, B. (2016b). Development of non-contact structural health monitoring system for machine tools. Journal of Applied Research and Technology, 14(4), 245–258.

Goyal, D., Pabla, B.S., Dhami, S.S., & Lachhwani, K. (2017a). Optimization of condition-based maintenance using soft computing. Neural Computing and Applications, 28(1), 829–844.

Goyal, D., Vanraj, Pabla, B.S., & Dhami, S. (2017b). Condition monitoring parameters for fault diagnosis of fixed axis gearbox: a review. Archives of Computational Methods in Engineering, 24(3), 543–556.

Goyal, D., Vanraj, Pabla, B.S., & Dhami, S. (2019). Non-contact sensor placement strategy for condition monitoring of rotating machine elements. Engineering Science and Technology, an International Journal, 22(2), 489–501.

Gunn, S. R., et al. (1998). Support vector machines for classification and regression. ISIS Technical Report, 14(1), 5–16.

Janssens, O., Schulz, R., Slavkovikj, V., Stockman, K., Loccufier, M., Van de Walle, R., et al. (2015). Thermal image based fault diagnosis for rotating machinery. Infrared Physics & Technology, 73, 78–87.

Kankar, P. K., Sharma, S. C., & Harsha, S. P. (2011). Fault diagnosis of ball bearings using machine learning methods. Expert Systems with Applications, 38(3), 1876–1886.

Konar, P., & Chattopadhyay, P. (2011). Bearing fault detection of induction motor using wavelet and support vector machines (SVMS). Applied Soft Computing, 11(6), 4203–4211.

Lebaroud, A., & Clerc, G. (2008). Classification of induction machine faults by optimal time–frequency representations. IEEE Transactions on Industrial Electronics, 55(12), 4290–4298.

Li, X., Zhang, W., Ding, Q., & Sun, J. Q. (2018). Intelligent rotating machinery fault diagnosis based on deep learning using data augmentation. Journal of Intelligent Manufacturing,. https://doi.org/10.1007/s10845-018-1456-1.

Lim, G.-M., Bae, D.-M., & Kim, J.-H. (2014). Fault diagnosis of rotating machine by thermography method on support vector machine. Journal of Mechanical Science and Technology, 28(8), 2947–2952.

Lin, J., & Chen, Q. (2013). Fault diagnosis of rolling bearings based on multifractal detrended fluctuation analysis and mahalanobis distance criterion. Mechanical Systems and Signal Processing, 38(2), 515–533.

Linessio, R. P., de Morais Sousa, K., da Silva, T., Bavastri, C. A., da Costa Antunes, P. F., & da Silva, J. C. C. (2016). Induction motors vibration monitoring using a biaxial optical fiber accelerometer. IEEE Sensors Journal, 16(22), 8075–8082.

Liu, S., Hu, Y., Li, C., Lu, H., & Zhang, H. (2017). Machinery condition prediction based on wavelet and support vector machine. Journal of Intelligent Manufacturing, 28(4), 1045–1055.

Liu, R., Yang, B., Zio, E., & Chen, X. (2018). Artificial intelligence for fault diagnosis of rotating machinery: A review. Mechanical Systems and Signal Processing, 108, 33–47.

Liu, J., & Zio, E. (2016). Feature vector regression with efficient hyperparameters tuning and geometric interpretation. Neurocomputing, 218, 411–422.

Nanni, L. (2006). Cluster-based pattern discrimination: A novel technique for feature selection. Pattern Recognition Letters, 27(6), 682–687.

Niu, G., Singh, S., Holland, S. W., & Pecht, M. (2011). Health monitoring of electronic products based on mahalanobis distance and weibull decision metrics. Microelectronics Reliability, 51(2), 279–284.

Oh, H., Azarian, M. H., & Pecht, M. (2011). Estimation of fan bearing degradation using acoustic emission analysis and mahalanobis distance. In Proceedings of the applied systems health management conference (pp. 1–12).

Rafiee, J., Rafiee, M., & Tse, P. (2010). Application of mother wavelet functions for automatic gear and bearing fault diagnosis. Expert Systems with Applications, 37(6), 4568–4579.

Randall, R. B. (2011). Vibration-based condition monitoring: Industrial, aerospace and automotive applications. New York: Wiley.

Saidi, L., Ali, J. B., & Fnaiech, F. (2015). Application of higher order spectral features and support vector machines for bearing faults classification. ISA Transactions, 54, 193–206.

Samanta, B. (2004). Gear fault detection using artificial neural networks and support vector machines with genetic algorithms. Mechanical Systems and Signal Processing, 18(3), 625–644.

Samanta, B., Al-Balushi, K. R., & Al-Araimi, S. A. (2006). Artificial neural networks and genetic algorithm for bearing fault detection. Soft Computing, 10(3), 264–271.

Son, J.-D., Niu, G., Yang, B.-S., Hwang, D.-H., & Kang, D.-S. (2009). Development of smart sensors system for machine fault diagnosis. Expert Systems with Applications, 36(9), 11981–11991.

Sousa, K. M., da Costa, I. B. V., Maciel, E. S., Rocha, J. E., Martelli, C., & da Silva, J. C. C. (2017). Broken bar fault detection in induction motor by using optical fiber strain sensors. IEEE Sensors Journal, 17(12), 3669–3676.

Soylemezoglu, A., Jagannathan, S., & Saygin, C. (2010). Mahalanobis taguchi system (mts) as a prognostics tool for rolling element bearing failures. Journal of Manufacturing Science and Engineering, 132(5), 051014.

Suykens, J. A., & Vandewalle, J. (1999). Least squares support vector machine classifiers. Neural Processing Letters, 9(3), 293–300.

Tian, J., Morillo, C., Azarian, M. H., & Pecht, M. (2016). Motor bearing fault detection using spectral kurtosis-based feature extraction coupled with k-nearest neighbor distance analysis. IEEE Transactions on Industrial Electronics, 63(3), 1793–1803.

Vapnik, V. N. (1999). An overview of statistical learning theory. IEEE Transactions on Neural Networks, 10, 988–999.

Vass, J., Šmíd, R., Randall, R., Sovka, P., Cristalli, C., & Torcianti, B. (2008). Avoidance of speckle noise in laser vibrometry by the use of kurtosis ratio: Application to mechanical fault diagnostics. Mechanical Systems and Signal Processing, 22(3), 647–671.

Widodo, A., & Yang, B.-S. (2007). Support vector machine in machine condition monitoring and fault diagnosis. Mechanical Systems and Signal Processing, 21(6), 2560–2574.

Wu, S.-D., Wu, C.-W., Wu, T.-Y., & Wang, C.-C. (2013). Multi-scale analysis based ball bearing defect diagnostics using mahalanobis distance and support vector machine. Entropy, 15(2), 416–433.

Xia, M., Li, T., Shu, T., Wan, J., de Silva, C. W., & Wang, Z. (2018). A two-stage approach for the remaining useful life prediction of bearings using deep neural networks. IEEE Transactions on Industrial Informatics, 15(6), 3703–3711.

Younus, A. M., & Yang, B.-S. (2012). Intelligent fault diagnosis of rotating machinery using infrared thermal image. Expert Systems with Applications, 39(2), 2082–2091.

Yuwono, M., Qin, Y., Zhou, J., Guo, Y., Celler, B. G., & Su, S. W. (2016). Automatic bearing fault diagnosis using particle swarm clustering and hidden markov model. Engineering Applications of Artificial Intelligence, 47, 88–100.

Zhang, Z., Wang, Y., & Wang, K. (2013). Fault diagnosis and prognosis using wavelet packet decomposition, fourier transform and artificial neural network. Journal of Intelligent Manufacturing, 24(6), 1213–1227.

Zhou, H., Chen, J., Dong, G., & Wang, R. (2016). Detection and diagnosis of bearing faults using shift-invariant dictionary learning and hidden markov model. Mechanical Systems and Signal Processing, 72, 65–79.

Zhu, Y., & Zhang, Y. (2003). Support vector machine and its application in mechanical fault pattern recognition. Ph.D. Thesis, Xi’an China, Department of Mechanical Engineering, Xi’an Jiaotong University.

Titel: Support vector machines based non-contact fault diagnosis system for bearings
verfasst von: Deepam Goyal
Anurag Choudhary
B. S. Pabla
S. S. Dhami
Publikationsdatum: 18.11.2019
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 5/2020
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-019-01511-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2020

Monitoring of a machining process using kernel principal component analysis and kernel density estimation

An intelligent decision support system for production planning based on machine learning

Retraction Note to: Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam

Image synthesis in contrast MRI based on super resolution reconstruction with multi-refinement cycle-consistent generative adversarial networks

Formal modeling of cyber-physical resource scheduling in IIoT cloud environments

Hybrid constrained permutation algorithm and genetic algorithm for process planning problem

Premium Partner

Marktübersichten