nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

Surrogates for Biodiesel: Review and Challenges

verfasst von : Aditya Dilip Lele, Krishnasamy Anand, Krithika Narayanaswamy

Erschienen in: Biofuels

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Biodiesel is being considered as a renewable fuel candidate to completely or partially replace fossil diesel. Understanding its combustion is key to assess its applicability in practical compression ignition engines. Significant progress has been made in understanding biodiesel combustion through experimental studies, development of reaction kinetics to describe its oxidation, and simulations in typical engine environments. The use of surrogates in place of the real biodiesels plays a crucial role in this endeavour. This chapter reviews the existing studies revolving around surrogate fuels for biodiesels. Thereafter, the challenges ahead in this context to further enhance our knowledge of biodiesel combustion are presented, and possible options to address these are discussed where appropriate.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Microalgae Based Biofuel: Challenges and Opportunities

Nächstes Kapitel Response Surface Methodology Based Multi-objective Optimization of the Performance-Emission Profile of a CI Engine Running on Ethanol in Blends with Diesel

Nur mit Berechtigung zugänglich

Anand K, Sharma RP, Mehta PS (2008) Experimental investigations on combustion of jatropha methyl ester in a turbocharged direct-injection diesel engine. Proc Inst Mech Eng Part D: J Autom Eng 222(10):1865–1877CrossRef

Demirbas A (2009) Progress and recent trends in biodiesel fuels. Energy Convers Manag 50(1):14–34CrossRef

Wang W-G, Lyons W, Clark N, Gautam M, Norton P (2000) Emissions from nine heavy trucks fueled by diesel and biodiesel blend without engine modification. Environ Sci Technol 34(6):933–939CrossRef

Colket M, Edwards T, Williams S, Cernansky NP, Miller DL, Egolfopoulos F, Lindstedt P, Seshadri K, Dryer FL, Law CK, Friend D, Lenhert DB, Pitsch v, Sarofim A, Smooke M, Tsang W (2007) Development of an experimental database and kinetic models for surrogate jet fuels. In: 45th AIAA aerospace sciences meeting and exhibit, pp 2007–770

Narayanaswamy K, Pitsch H, Pepiot P (2016) A component library framework for deriving kinetic mechanisms for multi-component fuel surrogates: application for jet fuel surrogates. Combust Flame 165:288–309CrossRef

Farrell JT, Cernansky NP, Dryer FL, Friend DG, Hergart CA, Law CK, McDavid RM, Mueller CJ, Patel AK, Pitsch H (2007) Development of an experimental database and kinetic models for surrogate diesel fuels. SAE Paper No. 2007-01-0201

Pitz WJ, Mueller CJ (2011) Recent progress in the development of diesel surrogate fuels. Prog Energy Combust Sci 37(3):330–350CrossRef

Mehl M, Chen J-Y, Pitz WJ, Mani Sarathy S, Westbrook CK (2011) An approach for formulating surrogates for gasoline with application toward a reduced surrogate mechanism for CFD engine modeling. Energy Fuels 25(11):5215–5223CrossRef

Westbrook CK, Naik CV, Herbinet O, Pitz W, Mehl M, Sarathy SM, Curran HJ (2011) Detailed chemical kinetic reaction mechanisms for soy and rapeseed biodiesel fuels. Combust Flame 158(4):742–755CrossRef

10.

Pitsch H, Bollig M (1993) Flamemaster, a computer code for homogeneous and one-dimensional laminar flame calculations. Institut fur Technische Mechanik, RWTH Aachen

11.

Thangaraja J, Anand K, Pramod S (2016) Mehta. Biodiesel no x penalty and control measures-a review. Renew Sustain Energy Rev 61:1–24CrossRef

12.

Goodrum JW (2002) Volatility and boiling points of biodiesel from vegetable oils and tallow. Biomass Bioenergy 22(3):205–211CrossRef

13.

Yanowitz J, Ratcliff MA, McCormick RL, Taylor JD, Murphy MJ (2014) Compendium of experimental cetane numbers. Technical Repot, National Renewable Energy LaboratoryCrossRef

14.

Takase M, Zhao T, Zhang M, Chen Y, Liu H, Yang L, Xiangyang W (2015) An expatiate review of neem, jatropha, rubber and karanja as multipurpose non-edible biodiesel resources and comparison of their fuel, engine and emission properties. Renew Sustain Energy Rev 43:495–520CrossRef

15.

Wang W, Gowdagiri S, Oehlschlaeger MA (2013) Comparative study of the autoignition of methyl decanoates, unsaturated biodiesel fuel surrogates. Energy Fuels 27(9):5527–5532CrossRef

16.

Herbinet O, Pitz WJ, Westbrook CK (2008) Detailed chemical kinetic oxidation mechanism for a biodiesel surrogate. Combust Flame 154(3):507–528CrossRef

17.

Anand K, Sharma RP, Pramod S (2011) Mehta. Experimental investigations on combustion, performance and emissions characteristics of neat karanji biodiesel and its methanol blend in a diesel engine. Biomass Bioenergy 35(1):533–541CrossRef

18.

Edwards T, Maurice LQ (2000) Surrogate mixtures to represent complex aviation and rocket fuels. J Prop Power 17:461–466CrossRef

19.

Mueller CJ, Cannella WJ, Bruno TJ, Bunting B, Dettman HD, Franz JA, Huber ML, Natarajan M, Pitz WJ, Ratcliff MA, Wright K (2012) Methodology for formulating diesel surrogate fuels with accurate compositional, ignition-quality, and volatility characteristics. Energy & Fuels 26(6):3284–3303

20.

Ahmed A, Goteng G, Shankar VSB, Al-Qurashi K, Roberts WL, Mani Sarathy S (2015) A computational methodology for formulating gasoline surrogate fuels with accurate physical and chemical kinetic properties. Fuel 143:290–300

21.

Pepiot-Desjardins P (2008) Automatic strategies for chemical mechanism reduction. PhD thesis, Stanford University, Department of Mechanical Engineering, June 2008

22.

Gal S, Thomson MJ, Mani Sarathy S, Syed SA, Dagaut P, Diévart P, Marchese AJ, Dryer FL (2007) A wide-ranging kinetic modeling study of methyl butanoate combustion. Proc Combustion Inst 31(1):305–311

23.

Liu W, Sivaramakrishnan R, Davis MJ, Som S, Longman DE, Lu TF (2013) Development of a reduced biodiesel surrogate model for compression ignition engine modeling. Proc Combustion Inst 34(1):401–409

24.

Kiat Ng H, Gan S, Ng J-H, Mun Pang K (2013) Development and validation of a reduced combined biodiesel–diesel reaction mechanism. Fuel 104:620–634

25.

Brakora JL, Ra Y, Reitz RD, McFarlane J, Stuart Daw C (2008) Development and validation of a reduced reaction mechanism for biodiesel-fueled engine simulations. SAE Int J Fuels Lubricants 1(2008-01-1378):675–702

26.

Mohamed Ismail H, Kiat Ng H, Gan S, Lucchini T, Onorati A (2013) Development of a reduced biodiesel combustion kinetics mechanism for CFD modelling of a light-duty diesel engine. Fuel 106:388–400

27.

Luo Z, Tianfeng L, Maciaszek MJ, Som S, Longman DE (2010) A reduced mechanism for high-temperature oxidation of biodiesel surrogates. Energy Fuels 24(12):6283–6293CrossRef

28.

An H, Yang WM, Maghbouli A, Li J, Chua KJ (2014) A skeletal mechanism for biodiesel blend surrogates combustion. Energy Convers Manag 81:51–59CrossRef

29.

Chang Y, Jia M, Li Y, Zhang Y, Xie M, Wang H, Reitz RD (2015) Development of a skeletal oxidation mechanism for biodiesel surrogate. Proc Combustion Inst 35(3):3037–3044

30.

Cheng X, Kiat Ng H, Gan S, Hou Ho J, Mun Pang K (2015) Development and validation of a generic reduced chemical kinetic mechanism for CFD spray combustion modelling of biodiesel fuels. Combustion Flame 162(6):2354–2370

31.

Luo Z, Plomer M, Lu T, Som S, Longman DE, Mani Sarathy S, and William J. Pitz. A reduced mechanism for biodiesel surrogates for compression ignition engine applications. Fuel, 99:143–153, 2012

32.

Liu T, Jiaqiang E, Yang W, Hui A, Hao Cai (2016) Development of a skeletal mechanism for biodiesel blend surrogates with varying fatty acid methyl esters proportion. Appl Energy 162(x):278–288

33.

Jiaqiang E, Liu T, Yang W, Deng Y, Gong J (2016) A skeletal mechanism modeling on soot emission characteristics for biodiesel surrogates with varying fatty acid methyl esters proportion. Appl Energy 181:322–331

34.

Herbinet O, Pitz WJ, Westbrook CK (2010) Detailed chemical kinetic mechanism for the oxidation of biodiesel fuels blend surrogate. Combust Flame 157(5):893–908CrossRef

35.

Dagaut P, Gail S, Sahasrabudhe M (2007) Rapeseed oil methyl ester oxidation over extended ranges of pressure, temperature, and equivalence ratio: Experimental and modeling kinetic study. Proc Combustion Inst 31 II:2955–2961

36.

Fisher EM, Pitz WJ, Curran HJ, Westbrook CK (2000) Detailed chemical kinetic mechanisms for combustion of oxygenated fuels. Proc Combust Inst 28:1579–1586CrossRef

37.

Metcalfe WK, Dooley S, Curran HJ, Simmie JM, El-Nahas AM, Navarro MV (2007) Experimental and modeling study of C₅H₁₀O₂ ethyl and methyl esters. J Phys Chem A 111(19):4001–4014CrossRef

38.

Hakka MH, Glaude PA, Herbinet O, Battin-Leclerc F (2009) Experimental study of the oxidation of large surrogates for diesel and biodiesel fuels. Combustion Flame 156(11):2129–2144

39.

Grana R, Frassoldati A, Cuoci A, Faravelli T, Ranzi E (2012) A wide range kinetic modeling study of pyrolysis and oxidation of methyl butanoate and methyl decanoate. note i: Lumped kinetic model of methyl butanoate and small methyl esters. Energy 43(1):124–139CrossRef

40.

Parandaman A, Balaganesh M, Rajakumar B (2015) Experimental and theoretical study on thermal decomposition of methyl butanoate behind reflected shock waves. RSC Advances 5(105):86536–86550CrossRef

41.

Diévart P, Hee Won S, Gong J, Dooley S, Ju Y (2013) A comparative study of the chemical kinetic characteristics of small methyl esters in diffusion flame extinction. Proc Combustion Inst 34(1):821–829

42.

Curran HJ, Gaffuri P, Pitz WJ, Westbrook CK (1998) A comprehensive modeling study of n-heptane oxidation. Combustion Flame, 114(1):149–177

43.

Curran HJ, Gaffuri P, Pitz WJ, Westbrook CK (2002) A comprehensive modeling study of iso-octane oxidation. Combustion Flame 129(3):253–280

44.

Diévart P, Hee Won S, Dooley S, Dryer FL, Ju Y (2012) A kinetic model for methyl decanoate combustion. Combustion Flame 159(5):1793–1805

45.

Gal S, Sarathy SM, Thomson MJ, Diévart P, Dagaut P (2008) Experimental and chemical kinetic modeling study of small methyl esters oxidation: Methyl (e)-2-butenoate and methyl butanoate. Combust Flame 155(4):635–650CrossRef

46.

Herbinet O, Biet J, Hichem Hakka M, Warth V, Alexandre Glaude P, Nicolle A, Battin-Leclerc F (2011) Modeling study of the low-temperature oxidation of large methyl esters from C11 to C19. Proc Combustion Inst 33(1):391–398

47.

Saggese C, Frassoldati A, Cuoci A, Faravelli T, Ranzi E (2013) A lumped approach to the kinetic modeling of pyrolysis and combustion of biodiesel fuels. Proc Combust Inst 34(1):427–434CrossRef

48.

Coniglio L, Bennadji H, Alexandre Glaude P, Herbinet O, Billaud F (2013) Combustion chemical kinetics of biodiesel and related compounds (methyl and ethyl esters): experiments and modeling–advances and future refinements. Progr Energy Combustion Sci 39(4):340–382

49.

Lai JYW, Lin KC, Violi A (2011) Biodiesel combustion: advances in chemical kinetic modeling. Progr Energy Combustion Sci 37(1):1–14

50.

Sarathy SM, Thomson MJ, Pitz WJ, Lu T (2011) An experimental and kinetic modeling study of methyl decanoate combustion. Proc Combust Inst 33(1):399–405CrossRef

51.

Dooley S, Curran HJ, Simmie JM (2008) Autoignition measurements and a validated kinetic model for the biodiesel surrogate, methyl butanoate. Combust Flame 153(1):2–32CrossRef

52.

Wang YL, Lee DJ, Westbrook CK, Egolfopoulos FN, Tsotsis TT (2014) Oxidation of small alkyl esters in flames. Combust Flame 161(3):810–817CrossRef

53.

Wang YL, Feng Q, Egolfopoulos FN, Tsotsis TT (2011) Studies of C₄ and C₁₀ methyl ester flames. Combust Flame 158(8):1507–1519CrossRef

54.

Alexandre Glaude P, Herbinet O, Bax S, Biet J, Warth V, Battin-Leclerc F (2010) Modeling of the oxidation of methyl esters—validation for methyl hexanoate, methyl heptanoate, and methyl decanoate in a jet-stirred reactor. Combust Flame 157(11):2035–2050

55.

Seshadri K, Tianfeng L, Herbinet O, Humer S, Niemann U, Pitz WJ, Seiser R, Law CK (2009) Experimental and kinetic modeling study of extinction and ignition of methyl decanoate in laminar non-premixed flows. Proc Combust Inst 32(1):1067–1074CrossRef

56.

Farrel JT, Weissman W, Johnston RJ, Nishimura J, Ueda T, Iwashita Y (2003) Fuel effects on sidi efficiency and emissions. SAE Publication 2003-01-3186 (2003)

57.

Kuo TW (1990) J Eng Gas Turbines Power 112:348–356CrossRef

58.

Tianfeng L, Law CK (2005) A directed relation graph method for mechanism reduction. Proc Combust Inst 30(1):1333–1341CrossRef

59.

Pepiot-Desjardins P, Pitsch H (2008) An efficient error-propagation-based reduction method for large chemical kinetic mechanisms. Combust Flame 154(1–2):67–81CrossRefMATH

60.

Niemeyer KE, Sung C-J, Raju MP (2010) Skeletal mechanism generation for surrogate fuels using directed relation graph with error propagation and sensitivity analysis. Combust Flame 157(9):1760–1770CrossRef

61.

Gustavsson J, Golovitchev VI (2003) Spray combustion simulation based on detailed chemistry approach for diesel fuel surrogate model. Technical report, SAE Technical Paper

62.

Som S, Ramirez AI, Longman DE, Aggarwal SK (2011) Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions. Fuel 90(3):1267–1276

63.

Som S, Longman DE, Luo Z, Plomer M, Lu T, Senecal PK, Pomraning E (2012) Simulating flame lift-off characteristics of diesel and biodiesel fuels using detailed chemical-kinetic mechanisms and large eddy simulation turbulence model. J Energy Res Technol 134(3):032204

64.

Niemeyer KE, Sung C-J (2014) Mechanism reduction for multicomponent surrogates: a case study using toluene reference fuels. Combust Flame 161(11):2752–2764CrossRef

65.

Davidson DF, Haylett DR, Hanson RK (2008) Development of an aerosol shock tube for kinetic studies of low-vapor-pressure fuels. Combust Flame 155(1):108–117CrossRef

66.

Narayanaswamy K, Pepiot P (under review) Simulation-driven formulation of transportation fuel surrogates. Combust Theory Model

67.

Pintos M, Bravo R (1988) Maria Carmen Baluja, Maria Inmaculada Paz Andrade, Geneviève Roux-Desgranges, and Jean-Pierre E Grolier. Thermodynamics of alkanoate + alkane binary mixtures. concentration dependence of excess heat capacities and volumes. Can J Chem 66(5):1179–1186CrossRef

68.

Ortega J, Alcalde R (1992) Determination and algebraic representation of volumes of mixing at 298.15 K of methyl n-alkanoates (from ethanoate to n-pentadecanoate) with n-pentadecane. Fluid Phase Equilib 71(1–2):49–62CrossRef

69.

José S (2001) Matos, José L Trenzado, Emilio González, and Rafael Alcalde. Volumetric properties and viscosities of the methyl butanoate + n-heptane + n-octane ternary system and its binary constituents in the temperature range from 283.15 to 313.15 K. Fluid Phase Equilib 186(1):207–234

70.

Knothe G, Steidley KR (2005) Kinematic viscosity of biodiesel fuel components and related compounds. Influence of compound structure and comparison to petrodiesel fuel components. Fuel 84(9):1059–1065CrossRef

71.

Tsibanogiannis IN, Kalospiros NS, Tassios DP (1995) Prediction of normal boiling point temperature of medium/high molecular weight compounds. Ind Eng Chem Res 34(3):997–1002CrossRef

72.

Liu S, Cao C, Li Z (1998) Approach to estimation and prediction for normal boiling point (NBP) of alkanes based on a novel molecular distance-edge (MDE) vector, & #x03BB. J Chem Inf Comput Sci 38(3):387–394CrossRef

73.

Krishnasamy A, Ra Y, Reitz RD, Bunting B (2012) Combustion simulations of the fuels for advanced combustion engines in a homogeneous charge compression ignition engine. Int J Engine Res 191–208

74.

Krishnasamy A, Reitz RD, Willems W, Kurtz E (2013) Surrogate diesel fuel models for low temperature combustion. SAE Technical Paper, 2013-01-1092

75.

Anand K, Ra Y, Reitz RD, Bunting B (2011) Surrogate model development for fuels for advanced combustion engines. Energy & Fuels 25(4):1474–1484

76.

Xue J, Grift TE, Hansen AC (2011) Effect of biodiesel on engine performances and emissions. Renew Sustain Energy Rev 15(2):1098–1116CrossRef

Titel: Surrogates for Biodiesel: Review and Challenges
verfasst von: Aditya Dilip Lele
Krishnasamy Anand
Krithika Narayanaswamy
Verlag: Springer Singapore
Buch: Biofuels
Print ISBN: 978-981-10-3790-0

Electronic ISBN: 978-981-10-3791-7

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-981-10-3791-7_10