Synergistic plasticizing effect of bio-based isosorbide di-epoxidized oleate on poly(vinyl chloride) resins

The strategic importance of developing environmentally friendly PVC biomass plasticizers with excellent anti-migration and plasticizing effects cannot be overstated. This paper delves into the synthesis and application of bio-based isosorbide di-epoxidized oleate (IDEO) as a secondary biomass plasticizer in polyvinyl chloride (PVC) films. Explored were the synergistic effects between IDEO and dioctyl phthalate (DOP), alongside an assessment of the influence of the compound plasticizer on the properties of PVC products. The partial substitution of DOP resulted in PVC films with improved thermal stability, flexibility, and migration resistance. IDEO-10/PVC, in particular, exhibited a 64% increase in tensile strength compared to DOP/PVC and maintained thermal stabilization for over 280 min at 180 °C. With a glass transition temperature (T_g) of 33 °C, a plasticizing efficiency of 148%, and excellent cold resistance properties, IDEO-10/PVC outperformed DOP/PVC. IDEO-10/PVC migration resistance was significantly lower than in the original PVC resin with only DOP plasticizers under three different polar conditions. Transmittance remained above 87% after 10 days of UV irradiation. Molecular dynamics simulation further confirmed the synergistic plasticizing effect between IDEO and DOP at an IDEO addition of 10 phr. The environmentally friendly approach holds significant promise for the scaled-up application of PVC.