nach oben

Erschienen in:

2018 | OriginalPaper | Buchkapitel

TEAM: A Tool for Eco Additive Manufacturing to Optimize Environmental Impact in Early Design Stages

verfasst von : Laverne Floriane, Bottacini Enrico, Segonds Frédéric, Perry Nicolas, D’Antonio Gianluca, Chiabert Paolo

Erschienen in: Product Lifecycle Management to Support Industry 4.0

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Nowadays, the environmental impact of a product is a major factor for the design team and for the end customer. To decrease the environmental impact of a product during its whole lifecycle, many design methods are available focusing on the multitude of data from the product once it is fully designed (Lifecycle Analysis etc.). However, the design choices made in the early design stages have a crucial importance on the environmental impact of the chosen solution. It is therefore necessary to propose to the multidisciplinary design team a tool to help them choosing the best concept and the best way to produce it as early as possible. The emphasis in this paper is on Additive Manufacturing technologies, which are widely used in concept development. A design tool prototype is presented and evaluated in order to foster early eco-additive manufacturing of concepts.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Development of a Concept for a Holistic Knowledge-Based Additive Manufacturing over the Entire Lifecycle

Nächstes Kapitel A Review of Integrated Approaches for Material, Design and Process Selection and a Proposal for the AM Processes

Bakker, C.A.: Environmental Information for Industrial Designers (1995). http://resolver.tudelft.nl/uuid:35b9dbef-3718-40fc-b64a-178b1cd0fed8

da Silva Barros, K., Zwolinski, P.: Influence of the use/user profile in the LCA of 3d printed products. Procedia CIRP 50, 318–323 (2016). https://doi.org/10.1016/j.procir.2016.05.005CrossRef

Coghlan, D., Brannick, T.: Doing Action Research in Your Own Organization, 2nd edn. SAGE Publications, London (2005)

Despeisse, M., Ford, S.: The role of additive manufacturing in improving resource efficiency and sustainability. Paper presented at the Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth, Tokyo, Japan (2015)

F2792-12a, ASTM: Standard terminology for Additive Manufacturing Technologies. ASTM International, West Conshohocken, PA (2012)

Gibson, I., Rosen, D.R., Stucker, B.: Additive Manufacturing Technologies, 2nd edn. Springer, New York (2015). https://doi.org/10.1007/978-1-4939-2113-3CrossRef

ISO: ISO 14040:2006 Environmental management – Life cycle assessment – Principles and framework, p. 20 (2006)

ISO: ISO/ASTM 52900:2015 Additive manufacturing – General principles – Terminology, p. 19 (2015)

Laverne, F., Segonds, F., Anwer, N., Le Coq, M.: Assembly-based methods to support product innovation in design for additive manufacturing: an exploratory case study. ASME J. Mech. Des. 137(12), 121701–121708 (2015). https://doi.org/10.1115/1.4031589CrossRef

Laverne, F., Segonds, F., D’Antonio, G., Le Coq, M.: Enriching design with X through tailored additive manufacturing knowledge: a methodological proposal. Int. J. Interact. Des. Manuf. 11(2), 279–288 (2016). https://doi.org/10.1007/s12008-016-0314-7CrossRef

Mani, M., Lyons, K.W., Gupta, S.K.: Sustainability characterization for additive manufacturing. J. Res. Natl. Inst. Stand. Technol. 119, 419–428 (2014). https://doi.org/10.6028/jres.119.016CrossRef

Manzini, E.: Strategic design for sustainability: towards a new mix of products and services. Paper Presented at the Proceedings of the First International Conference on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan (1999)

Mejía, R., López, A., Molina, A.: Experiences in developing collaborative engineering environments: an action research approach. Comput. Ind. 58(4), 329–346 (2007). https://doi.org/10.1016/j.compind.2006.07.009CrossRef

Mellor, S., Hao, L., Zhang, D.: Additive manufacturing: a framework for implementation. Int. J. Prod. Econ. 149, 194–201 (2014). https://doi.org/10.1016/j.ijpe.2013.07.008CrossRef

Nielsen, J.: Usability Engineering, 362nd edn. Morgan Kaufmann Publishers Inc., San Francisco (1994)MATH

Scalabre, O.: Embracing Industry 4.0 and Rediscovering Growth (2018). https://www.bcg.com/capabilities/operations/embracing-industry-4.0-rediscovering-growth.aspx

Segonds, F., Cohen, G., Véron, P., Peyceré, J.: PLM and early stages collaboration in interactive design, a case study in the glass industry. Int. J. Interact. Des. Manuf. 10(2), 10 (2014). https://doi.org/10.1007/s12008-014-0217-4CrossRef

Stock, T., Seliger, G.: Opportunities of sustainable manufacturing in Industry 4.0. Procedia CIRP 40, 536–541 (2016). https://doi.org/10.1016/j.procir.2016.01.129CrossRef

Wohlers, T.T.: Wohlers Report 2014: 3D Printing and Additive Manufacturing State of the Industry Annual Worldwide Progress Report (2014)

Titel: TEAM: A Tool for Eco Additive Manufacturing to Optimize Environmental Impact in Early Design Stages
verfasst von: Laverne Floriane
Bottacini Enrico
Segonds Frédéric
Perry Nicolas
D’Antonio Gianluca
Chiabert Paolo
Verlag: Springer International Publishing
Buch: Product Lifecycle Management to Support Industry 4.0
Print ISBN: 978-3-030-01613-5

Electronic ISBN: 978-3-030-01614-2

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-3-030-01614-2_67

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"