nach oben

Engineering with Computers

Erschienen in:

01.01.2016 | Original Article

Ten challenges in 3D printing

verfasst von: William Oropallo, Les A. Piegl

Erschienen in: Engineering with Computers | Ausgabe 1/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Three dimensional printing has gained considerable interest lately due to the proliferation of inexpensive devices as well as open source software that drive those devices. Public interest is often followed by media coverage that tends to sensationalize technology. Based on popular articles, the public may create the impression that 3D printing is the Holy Grail; we are going to print everything as one piece, traditional manufacturing is at the brink of collapse, and exotic applications, such as cloning a human body by 3D bio-printing, are just around the corner. The purpose of this paper is to paint a more realistic picture by identifying ten challenges that clearly illustrate the limitations of this technology, which makes it just as vulnerable as anything else that had been touted before as the next game changer.

Vorheriger Artikel Genetic programing and non-linear multiple regression techniques to predict backbreak in blasting operation

Nächster Artikel Analytic and numerical solutions for axisymmetric flow with partial slip

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Gardan N, Schneider A (2014) Topological optimization of internal patterns and support in additive manufacturing. J Manuf Syst. doi:10.1016/j.jmsy.2014.07.003

Galantucci LM, Lavecchia F, Percoco G (2008) Study of compression properties of topologically optimized FDM made structured parts. CIRP Ann Manuf Technol 57(1):243–246. doi:10.1016/j.cirp.2008.03.009 CrossRef

Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies. Springer, New York. doi:10.1007/978-1-4419-1120-9 CrossRef

Chu J, Engelbrecht S, Graf G, Rosen D (2010) A comparison of synthesis methods for cellular structures with application to additive manufacturing. Rapid Prototyp J 16(4):275–283. doi:10.1108/13552541011049298 CrossRef

Vayre B, Vignat F, Villeneuve F (2012) Designing for additive manufacturing. Procedia CIRP 3:632–637. doi:10.1016/j.procir.2012.07.108 CrossRef

Rezaie R, Badrossamay M, Ghaie A, Moosavi H (2013) Topology optimization for fused deposition modeling process. Procedia CIRP 6:521–526. doi:10.1016/j.procir.2013.03.098 CrossRef

Mellor S, Hao L, Zhang D (2014) Additive manufacturing: a framework for implementation. Int J Prod Econ 149:194–201. doi:10.1016/j.ijpe.2013.07.008 CrossRef

Lipson H, Moon F, Hai J, Paventi C (2005) 3D printing the history of mechanisms. J Mech Des 127(5):1029–1033. doi:10.1115/1.1902999 CrossRef

Calì J, Calian D, Amati C, Kleinberger R, Steed A, Kautz J, Weyrich T (2012) 3D-printing of non-assembly, articulated models. ACM Trans Graph TOG 31(6):130. doi:10.1145/2366145.2366149

10.

Navangul G, Paul R, Anand S (2013) Error minimization in layered manufacturing parts by stereolithography file modification using a vertex translation algorithm. J Manuf Sci Eng 135(3):031006. doi:10.1115/1.4024035 CrossRef

11.

Ahn D, Kim H, Lee S (2007) Fabrication direction optimization to minimize post-machining in layered manufacturing. Int J Mach Tools Manuf 47(3):593–606. doi:10.1016/j.ijmachtools.2006.05.004 MathSciNetCrossRef

12.

Kulkarni P, Marsan A, Dutta D (2000) A review of process planning techniques in layered manufacturing. Rapid Prototyp J 6(1):18–35. doi:10.1108/13552540010309859 CrossRef

13.

Finishing processes: bond, seal and beautify 3D printed parts. http://www.stratasys.com/solutions-applications/finishing-processes

14.

Brajlih T, Valentan B, Balic J, Drstvensek I (2011) Speed and accuracy evaluation of additive manufacturing machines. Rapid Prototyp J 17(1):64–75. doi:10.1108/13552541111098644 CrossRef

15.

Pandey PM, Venkata Reddy N, Dhande SG (2003) Real time adaptive slicing for fused deposition modelling. Int J Mach Tools Manuf 43(1):61–71. doi:10.1016/S0890-6955(02)00164-5 CrossRef

16.

Hiller J, Lipson H (2009) Design and analysis of digital materials for physical 3D voxel printing. Rapid Prototyp J 15(2):137–149. doi:10.1108/13552540910943441 CrossRef

17.

Kai CC, Fai L, Chu-Sing L (2003) Rapid prototyping: principles and applications in manufacturing. World Scientific Publishing Co., Inc, Singapore

18.

Chen Y, Zhou C, Lao J (2011) A layerless additive manufacturing process based on CNC accumulation. Rapid Prototyp J 17(3):218–227. doi:10.1108/13552541111124806 CrossRef

19.

Keating S, Oxman N (2013) Compound fabrication: a multi-functional robotic platform for digital design and fabrication. Robotics Comput-Integr Manuf 29(6):439–448. doi:10.1016/j.rcim.2013.05.001 CrossRef

20.

Song X, Pan Y, Chen Y (2015) Development of a low-cost parallel kinematic machine for multidirectional additive manufacturing. J Manuf Sci Eng 137(2):021005. doi:10.1115/1.4028897 CrossRef

21.

Tong K (2003) Amine Lehtihet E.; Joshi, S.: parametric error modeling and software error compensation for rapid prototyping. Rapid Prototyp J 9(5):301–313. doi:10.1108/13552540310502202 CrossRef

22.

Liu W, Li L, Kochhar AK (1998) A method for assessing geometrical errors in layered manufacturing. Part 1: error interaction and transfer mechanisms. Int J Adv Manuf Technol 14(9):637–643. doi:10.1007/BF01192283 MATHCrossRef

23.

Shin K-H, Natu H, Dutta D, Mazumder J (2003) A method for the design and fabrication of heterogeneous objects. Mater Des 24(5):339–353. doi:10.1016/S0261-3069(03)00060-8 CrossRef

24.

Kou XY, Tan ST (2007) Heterogeneous object modeling: a review. Comput Aided Des 39(4):284–301. doi:10.1016/j.cad.2006.12.007 CrossRef

25.

Dutta D, Prinz FB, Rosen DW, Weiss LE (2001) Layered manufacturing: current status and future trends. J Comput Inf Sci Eng 1(1):60–71. doi:10.1115/1.1355029 CrossRef

26.

Compton B, Lewis J (2014) 3D-printing of lightweight cellular composites. Adv Mater 26(34):5930–5935. doi:10.1002/adma.201401804 CrossRef

27.

Christ S, Christ S, Schnabel M, Vorndran E, Groll J, Gbureck U (2015) Fiber reinforcement during 3D printing. Mater Lett 139:165–168. doi:10.1016/j.matlet.2014.10.065 CrossRef

28.

Pham DT, Gault RS (1998) A comparison of rapid prototyping technologies. Int J Mach Tools Manuf 38(10–11):1257–1287. doi:10.1016/S0890-6955(97)00137-5 CrossRef

29.

Pandey PM, Venkata Reddy N, Dhande SG (2007) Part deposition orientation studies in layered manufacturing. J Mater Process Technol 185(1):125–131. doi:10.1016/j.jmatprotec.2006.03.120 CrossRef

30.

Ma W, But W-C, He P (2004) NURBS-based adaptive slicing for efficient rapid prototyping. Comput Aided Des 36(13):1309–1325. doi:10.1016/j.cad.2004.02.001 CrossRef

31.

Pandey PM (2003) Venkata Reddy, N.; Dhande, S. G.: slicing procedures in layered manufacturing: a review. Rapid Prototyp J 9(5):274–288. doi:10.1108/13552540310502185 CrossRef

32.

Phatak AM, Pande SS (2012) Optimum part orientation in rapid prototyping using genetic algorithm. J Manuf Syst 31(4):395–402. doi:10.1016/j.jmsy.2012.07.001 CrossRef

33.

Sun SH, Chiang HW, Lee MI (2007) Adaptive direct slicing of a commercial CAD model for use in rapid prototyping. Int J Adv Manuf Technol 34(7–8):689–701. doi:10.1007/s00170-006-0651-y CrossRef

34.

Campbell I, Combrinck J, de Beer D, Barnard L (2008) Stereolithography build time estimation based on volumetric calculations. Rapid Prototyp J 14(5):271–279. doi:10.1108/13552540810907938 CrossRef

35.

Roberson DA, Espalin D, Wicker RB (2013) 3D printer selection: a decision-making evaluation and ranking model. Virtual Phys Prototyp 8(3):201–212. doi:10.1080/17452759.2013.830939 CrossRef

36.

Piegl LA (2005) Ten challenges in Computer-Aided Design. Comput Aided Des 37(4):461–470. doi:10.1016/j.cad.2004.08.012 CrossRef

Titel: Ten challenges in 3D printing
verfasst von: William Oropallo
Les A. Piegl
Publikationsdatum: 01.01.2016
Verlag: Springer London
Erschienen in: Engineering with Computers / Ausgabe 1/2016
Print ISSN: 0177-0667
Elektronische ISSN: 1435-5663
DOI: https://doi.org/10.1007/s00366-015-0407-0

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Beijing Auto Show 2024: Deutsche Hersteller wollen angreifen./© EKH-Pictures / Generated with AI / Stock.adobe.com, Buchstaben, die aus einem Megaphon kommen/© MicroStockHub/Getty Images/iStock, Digitale Lieferkette/© zapp2photo / stock.adobe.com, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Sustainibility Finance/© Robert Kneschke / stock.adobe.com / Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 1/2016

A combination of the ICA-ANN model to predict air-overpressure resulting from blasting

Performance study of gradient-enhanced Kriging

Analytic and numerical solutions for axisymmetric flow with partial slip

Genetic programing and non-linear multiple regression techniques to predict backbreak in blasting operation

Evaluation and prediction of flyrock resulting from blasting operations using empirical and computational methods

Adaptive hexahedral mesh generation and quality optimization for solid models with thin features using a grid-based method

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.