nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

25.06.2021 | Critical Review

The development of tube-to-tubesheet welding from automation to digitization

verfasst von: Ting Lei, Chaoqun Wu, Youmin Rong, Yu Huang

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Tube-to-tubesheet welding is widely used in manufacturing of heat exchangers, steam turbines, condensers, boilers, etc. It has evolved from manual arc welding, automatic welding to digital welding. In the future, it will be toward intelligent welding. However, the key technologies related to tube-to-tubesheet welding are seldom summarized. This paper presents the sensing, positioning, and control methods of tube-to-tubesheet welding in recent decades. The fundamental difference between automatic and digital tube-to-tubesheet welding is whether the operator or the sensors interacts or transmits data with the welding system. The characteristics of tube are obvious and consistent so that vision-aided robotic positioning is the most promising. Moreover, arc length control which is important to tube-to-tubesheet welding has also been reviewed. Three typical sensing methods and five typical control methods are proposed to realize arc length control. The development direction of tubesheet welding is also predicted. This paper has an active influence on the development of pressure vessels and related industries.

Vorheriger Artikel Correction to: Spark plasma sintering of polymer and polymer-based composites: a review

Nächster Artikel Research progress of laser welding under subatmospheric pressure

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ge Y, Xu YL, Yu HW, Chen C, Chen SB (2019) A method for detecting central coordinates of girth welds based on inverse compositional AAM in tube-tube sheet welding. In: Chen S, Zhang Y, Feng Z (eds) Transactions on intelligent welding manufacturing. Springer Singapore, Singapore, pp 65–81

Kannan S, Senthil Kumaran S, Kumaraswamidhas LA (2016) An investigation on compression strength analysis of commercial aluminium tube to aluminium 2025 tube plate by using TIG welding process. J Alloys Compd 666:131–143. https://doi.org/10.1016/j.jallcom.2016.01.096CrossRef

Arias R, Vaamonde E, Vandewynckèle A, Piñeiro E, Veron P (2010) Laser welding of tube to tube-sheet joint in steam generators for nuclear power plants. In: 29th international congress on applications of lasers and electro-optics, ICALEO 2010 - congress proceedings. pp 660–667

Kumar CV, Muthukumaran S, Pradeep A, Kumaran SS (2011) Optimizational study of friction welding of steel tube to aluminum tube plate using an external tool process. Int J Mech Mater Eng 6:300–306. https://doi.org/10.1017/CBO9781107415324.004CrossRef

Hattingh DG, von Welligh LG, Bernard D, Susmel L, Tovo R, James MN (2016) Semiautomatic friction stir welding of 38 mm OD 6082-T6 aluminium tubes. J Mater Process Technol 238:255–266. https://doi.org/10.1016/j.jmatprotec.2016.07.027CrossRef

Fan H, Ravala NK, Wikle HC, Chin BA (2003) Low-cost infrared sensing system for monitoring the welding process in the presence of plate inclination angle. J Mater Process Technol 140:668–675. https://doi.org/10.1016/S0924-0136(03)00836-7CrossRef

Chen D, Cai YH, Luo Y, Wang XX, Chi LX, Tang FS (2020) Measurement and analysis on the thermal and mechanical transfer characteristics of GTA arc affected by arc length. Meas J Int Meas Confed 153:107431. https://doi.org/10.1016/j.measurement.2019.107431CrossRef

Li X, Li XH, Ge SS, Khyam MO, Luo CM (2017) Automatic welding seam tracking and identification. IEEE Trans Ind Electron 64:7261–7271. https://doi.org/10.1109/TIE.2017.2694399CrossRef

Viri DP (1982) CRBRP modular steam generator tube-to-tubesheet and shell-closure welding. In: Topical meeting on engineering for nuclear plant construction, operation, and maintenance. Charleston, pp 28–31

10.

Kiefer JH (1982) Welding equipment and process development for inaccessible tube-to-tubesheet welding on a sodium-heated steam generator. In: International conference on welding technology for energy applications. Gatlinburg, pp 573–593

11.

Berbakov PJ (1984) Application of industrial robots in tubesheet cladding and tube to tubesheet welding. In: International conference on robotics and remote handling in the nuclear industry. Toronto, pp 23–27

12.

Dongming W, Zengfu G, Li T, Feng T (1995) The technical summary of tube-sheet welding of heat-exchangers in China and out of China. Press Vessel Technol 12:48–53

13.

Min L (2012) Development of hanging tube-sheet welder head. Chem Equip Technol 33:54–56. https://doi.org/10.16759/j.cnki.issn.1007-7251.2012.05.011CrossRef

14.

Qunzhou S (2009) The application of gantry tube-to-tubesheet automatic welding machine in chemical industry. Weld Technol 38:32–34. https://doi.org/10.13846/j.cnki.cn12-1070/tg.2009.04.019CrossRef

15.

TP040 tube to tube sheet orbital weld head. http://www.huahengweld.com/en/product/422.html. Accessed 2021-06-24

16.

Latifi H (2012) Advanced orbital pipe welding. Lappeenranta University of Technology

17.

Han H, Duan M, Cui Q, Li J (2005) Study on automatic welding process of curved seam with five welding guns. Trans China Weld Inst 26:5–9

18.

MaTig-501 Automatic positioning tube to tube sheet TIG orbital welding system. https://www.mausitalia.it/eng/products/tig-orbital-welding/matig502. Accessed 2021-06-24

19.

XiRobot. http://www.xirobot.com/index.php. Accessed 2021-06-24

20.

Nebot E (2018) Robotics: from automation to intelligent systems. Engineering 4:446–448. https://doi.org/10.1016/j.eng.2018.07.018CrossRef

21.

AMI robot welding system. http://www.arcmachines.com/products/newest-power-supplies-and-weld-heads/robotic-tube-tubesheet-welding-system. Accessed 2021-06-24

22.

CRPROBOT. http://www.crprobot.com/chanpin/. Accessed 2021-06-24

23.

Polysoude tubesheet welding robot. http://www.polysoude.com.cn/news/305.html. Accessed 2021-06-24

24.

Rout A, Deepak BBVL, Biswal BB (2019) Advances in weld seam tracking techniques for robotic welding: a review. Robot Comput Integr Manuf 56:12–37. https://doi.org/10.1016/j.rcim.2018.08.003CrossRef

25.

Li X, Li X, Khyam MO, Ge SS (2017) Robust welding seam tracking and recognition. IEEE Sensors J 17:5609–5617. https://doi.org/10.1109/JSEN.2017.2730280CrossRef

26.

Wei S, Kong M, Lin T, Chen S (2011) Three-dimensional weld seam tracking for robotic welding by composite sensing technology. Ind Robot 38:500–508. https://doi.org/10.1108/01439911111154072CrossRef

27.

Jin Z, Li HC, Zhang CH, Wang QY, Gao HM (2017) Online welding path detection in automatic tube-to-tubesheet welding using passive vision. Int J Adv ManufTechnol 90:3075–3084. https://doi.org/10.1007/s00170-016-9649-2CrossRef

28.

Liu J, Xu X (2018) Research on tube-plate welding robot based on binocular vision. In: International symposium in sensing and instrumentation in IoT era (ISSI). IEEE, pp 1–5

29.

Xu X, Zhou H, Wang J (2015) Design of automatic welding machine for tube plate ring weld of tube type heat exchanger and welding torch orientation simulation. Welded Pipe Tube 38:13–17. https://doi.org/10.19291/j.cnki.1001-3938.2015.12.003CrossRef

30.

Zhang X (2016) Vision-based research on position and path planning of tube sheet robot welding. Shandong University

31.

Tian Y (2016) Research on the key technology of tube sheet welding robot system. Jiangnan University

32.

Lei T, Wang W, Rong Y, Xiong PF, Huang Y (2020) Cross-lines laser aided machine vision in tube-to-tubesheet welding for welding height control. Opt Laser Technol 121:105796. https://doi.org/10.1016/j.optlastec.2019.105796CrossRef

33.

Landers RG, Barton K, Devasia S, Kurfess T, Pagilla P, Tomizuka M (2020) A review of manufacturing process control. J Manuf Sci Eng 142. https://doi.org/10.1115/1.4048111

34.

Zhang YM, Yang Y-P, Zhang W, Na S-J (2020) Advanced welding manufacturing: a brief analysis and review of challenges and solutions. J Manuf Sci Eng 142(11):1–77. https://doi.org/10.1115/1.4047947CrossRef

35.

Wang B, Hu SJ, Sun L, Freiheit T (2020) Intelligent welding system technologies: state-of-the-art review and perspectives. J Manuf Syst 56:373–391. https://doi.org/10.1016/j.jmsy.2020.06.020CrossRef

36.

Cai J, Lei T (2021) An autonomous positioning method of tube-to-tubesheet welding robot based on coordinate transformation and template matching. IEEE Robot Autom Lett 6:787–794. https://doi.org/10.1109/LRA.2021.3050741CrossRef

37.

Chu HH, Wang ZY, Luo X (2016) Quality inspection algorithm based on machine vision for tube-sheet welding. Proc IEEE work adv robot its soc impacts, ARSO 2016-Novem: 279–283. https://doi.org/10.1109/ARSO.2016.7736295

38.

Wang L, Yun F, Yao S, Liu J (2016) Measurement method and pipe wall misalignment adjustment algorithm of the pipe butting machine. Meas J Int Meas Confed 94:873–882. https://doi.org/10.1016/j.measurement.2016.09.034CrossRef

39.

Wu YF, Fu Q, Qi JC, Liu Y, Yang M (2018) Development of automatic welding machine for tube-to-tubesheet joints of heat exchanger. In: Proceedings of 2018 IEEE 4th information technology and mechatronics engineering conference. pp 641–644

40.

Lageose MM (2000) Semiautomatic tube welding apparatus, USA patent

41.

Wang XW (2014) Three-dimensional vision-based sensing of GTAW: a review. Int J Adv Manuf Technol 72:333–345. https://doi.org/10.1007/s00170-014-5659-0CrossRef

42.

He T, Fan Y, Xie Y, Wu Q (2013) Positioning method for a visual guiding system in a laser welding machine. Sixth Int Symp Precis Mech Meas 8916:89162A. https://doi.org/10.1117/12.2035699CrossRef

43.

Pinto-Lopera JE, Motta JMST, Alfaro SCA (2016) Real-time measurement of width and height of weld beads in GMAW processes. Sensors (Switzerland) 16:1–14. https://doi.org/10.3390/s16091500CrossRef

44.

Lee B, Nguyen H (2015) Development of laser-vision system for three-dimensional circle detection and radius measurement. Opt - Int J Light Electron Opt 126:5412–5419. https://doi.org/10.1016/j.ijleo.2015.09.131CrossRef

45.

Li Y, Wang QL, Fan Z, Chen H, Sun Y (2010) Aperture detection and alignment control based on structured light vision. Proc 29th Chinese control conf CCC’10 3773–3778

46.

Guo J, Zhu Z, Sun B, Yu Y (2019) Principle of an innovative visual sensor based on combined laser structured lights and its experimental verification. Opt Laser Technol 111:35–44. https://doi.org/10.1016/j.optlastec.2018.09.010CrossRef

47.

Xiong J, Zhang G (2013) Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision. Meas Sci Technol 24(11):5103. https://doi.org/10.1088/0957-0233/24/11/115103CrossRef

48.

Shen H, Wu J, Lin T, Chen S (2008) Arc welding robot system with seam tracking and weld pool control based on passive vision. Int J Adv Manuf Technol 39:669–678. https://doi.org/10.1007/s00170-007-1257-8CrossRef

49.

Xiong J, Pi Y, Chen H (2019) Deposition height detection and feature point extraction in robotic GTA-based additive manufacturing using passive vision sensing. Robot Comput Integr Manuf 59:326–334. https://doi.org/10.1016/j.rcim.2019.05.006CrossRef

50.

Jin Z, Zhang C, Li H, Wang Z (2017) Visual sensing based image processing of auto tube-sheet welding. Trans China Weld Inst 10:117–120

51.

Zemlyakov EV, Babkin KD, Klimova OG, Turichin GA, Elkin VN (2016) Remotely controlled laser welding of tube-to-tube plate joints in the manufacture of heat exchangers. Weld Int 30:479–483. https://doi.org/10.1080/09507116.2015.1090177CrossRef

52.

Cheng Y, Chen W, Guo P, Zhao J (2018) CirLoc3D-visual location method for robot automatic tube plate welding system. In: International conference on computer, communication and network technology. pp 188–191

53.

Xu S, Wang W (2013) Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger. Int J Press Vessel Pip 101:37–44. https://doi.org/10.1016/j.ijpvp.2012.10.004CrossRef

54.

Cobo A, Mirapeix J, Linares F, Piney JA, Solana D, López-Higuera JM (2007) Spectroscopic sensor system for quality assurance of the tube-to-tubesheet welding process in nuclear steam generators. IEEE Sensors J 7:1219–1224CrossRef

55.

Yamane S (1992) Digital control of torch position and weld pool in MIG welding using image processing device. IEEE Trans Ind Appl 28:607–612. https://doi.org/10.1109/28.137446CrossRef

56.

Agapakis JE, Katz JM, Friedman JM, Epstein GN (1990) Vision-aided robotic welding. An approach and a flexible implementation. Int J Robot Res 9:17–34. https://doi.org/10.1177/027836499000900502CrossRef

57.

Kim JS, Son YT, Cho HS, Koh K II (1996) A robust visual seam tracking system for robotic arc welding. Mechatronics 6:141–163. https://doi.org/10.1016/0957-4158(95)00069-0CrossRef

58.

Zhang Y, Yang X (2012) A calibration method of binocular vision in laser remanufacturing robot. Appl Mech Mater 101–102:804–807. https://doi.org/10.4028/www.scientific.net/AMM.101-102.804CrossRef

59.

Zhao DB, Yi JQ, Chen SB, Wu L, Chen Q (2003) Extraction of three-dimensional parameters for weld pool surface in pulsed GTAW with wire filler. J Manuf Sci Eng Trans ASME 125:493–503. https://doi.org/10.1115/1.1556400CrossRef

60.

Ma HB, Wei SC, Lin T, Chen SB, Li LP (2010) Binocular vision system for both weld pool and root gap in robot welding process. Sens Rev 30:116–123. https://doi.org/10.1108/02602281011022706CrossRef

61.

Fan J, Jing F, Fang Z, Tan M (2017) Automatic recognition system of welding seam type based on SVM method. Int J Adv Manuf Technol 92:989–999. https://doi.org/10.1007/s00170-017-0202-8CrossRef

62.

Zhang L, Ye Q, Yang W, Jiao J (2014) Weld line detection and tracking via spatial-temporal cascaded Hidden Markov models and cross structured light. IEEE Trans Instrum Meas 63:742–753. https://doi.org/10.1109/TIM.2013.2283139CrossRef

63.

Zhang K, Chen YX, Gui H, Li DY, Li ZG (2018) Identification of the deviation of seam tracking and weld cross type for the derusting of ship hulls using a wall-climbing robot based on three-line laser structural light. J Manuf Process 35:295–306. https://doi.org/10.1016/j.jmapro.2018.08.014CrossRef

64.

Sung K, Lee H, Choi YS, Rhee S (2009) Development of a multiline laser vision sensor for joint tracking in welding. Weld J (Miami, Fla) 88(4):79–85

65.

Ding Y, Zhang X, Kovacevic R (2016) A laser-based machine vision measurement system for laser forming. Meas J Int Meas Confed 82:345–354. https://doi.org/10.1016/j.measurement.2015.10.036CrossRef

66.

Wang J, Wang W, Chen S (2007) Extraction of welding pool shape using linear approximation. Trans China Weld Inst 28:54–56

67.

Ogilvie KS (1992) Modeling of the gas metal arc welding process for control of arc length. University of Michigan

68.

Liu Y, Cook GE, Barnett RJ, Springfield JF (1992) PC-based arc ignition and arc length control system for gas tungsten arc welding. IEEE Trans Ind Appl 28:1160–1165. https://doi.org/10.1109/28.158843CrossRef

69.

Eguchi K, Yamane S, Sugi H, Kubota T, Oshima K (1999) Application of neural network to arc sensor. Sci Technol Weld Join 4:327–334. https://doi.org/10.1179/136217199101537950CrossRef

70.

Lei T, Rong Y, Wang H, Huang Y, Li M (2020) A review of vision-aided robotic welding. Comput Ind 123:103326. https://doi.org/10.1016/j.compind.2020.103326CrossRef

71.

Liu WJ, Guan ZY, Xiao J, Li LY, Yue JF (2019) Research on the seam tracking of narrow gap P-GMAW based on arc sound sensing. Sensors Actuators A Phys 292:205–216. https://doi.org/10.1016/j.sna.2019.04.015CrossRef

72.

Chu WH, Tung PC (2005) Development of an automatic arc welding system using a sliding mode control. Int J Mach Tools Manuf 45:933–939. https://doi.org/10.1016/j.ijmachtools.2004.10.012CrossRef

73.

Chen HB, Chen SB, Tao L (2015) The application of robotic welding in the shipbuilding. In: International conference on robotic welding, intelligence and automation. pp 483–492

74.

Chen SB, Lv N (2014) Research evolution on intelligentized technologies for arc welding process. J Manuf Process 16:109–122. https://doi.org/10.1016/j.jmapro.2013.07.002CrossRef

75.

Umeagukwu C, Maqueira B, Lambert R (1989) Robotic acoustic seam tracking: system development and application. IEEE Trans Ind Electron 36:338–348. https://doi.org/10.1109/41.31496CrossRef

76.

Kim Y, Rhee S (2001) Development of an arc sensor model using a fuzzy controller in gas metal arc welding. Meas Sci Technol 12:534–541. https://doi.org/10.1088/0957-0233/12/4/320CrossRef

77.

Li P, Zhang YM (2001) Robust sensing of arc length. IEEE Trans Instrum Meas 50:697–704. https://doi.org/10.1109/19.930442CrossRef

78.

Umeagukwu CI, Jarzynski J (1989) Application of ultrasonic sensors to robotic seam tracking. IEEE Trans Robot Autom 5:337–344. https://doi.org/10.1109/70.34769CrossRef

79.

Estochen EL, Neuman CP, Prinz FB (1984) Application of acoustic sensors to robotic seam tracking. IEEE Trans Ind Electron IE-31:219–224. https://doi.org/10.1109/TIE.1984.350038CrossRef

80.

Lv N, Zhong JY, Chen HB, Lin T, Chen SB (2014) Real-time control of welding penetration during robotic GTAW dynamical process by audio sensing of arc length. Int J Adv Manuf Technol 74:235–249. https://doi.org/10.1007/s00170-014-5875-7CrossRef

81.

Lv N, Xu YL, Li SC, Yu XW, Chen SB (2017) Automated control of welding penetration based on audio sensing technology. J Mater Process Technol 250:81–98. https://doi.org/10.1016/j.jmatprotec.2017.07.005CrossRef

82.

Xu YL, Zhong JY, Ding MY, Chen HB, Chen SB (2013) The acquisition and processing of real-time information for height tracking of robotic GTAW process by arc sensor. Int J Adv Manuf Technol 65:1031–1043. https://doi.org/10.1007/s00170-012-4237-6CrossRef

83.

Le J, Zhang H, Chen XQ (2018) Realization of rectangular fillet weld tracking based on rotating arc sensors and analysis of experimental results in gas metal arc welding. Robot Comput Integr Manuf 49:263–276. https://doi.org/10.1016/j.rcim.2017.06.004CrossRef

84.

Baek D, Moon HS, Park SH (2017) Development of an automatic orbital welding system with robust weaving width control and a seam-tracking function for narrow grooves. Int J Adv Manuf Technol 93:767–777. https://doi.org/10.1007/s00170-017-0562-0CrossRef

85.

Shi YH, Yoo WS, Na SJ (2006) Mathematical modelling of rotational arc sensor in GMAW and its applications to seam tracking and endpoint detection. Sci Technol Weld Join 11:723–731. https://doi.org/10.1179/174329306X153196CrossRef

86.

Lima EJ, Bracarense AQ (2010) Robotic shielded metal arc welding. Weld J (Miami, Fla) 89(8):166s–171s

87.

Kah P, Shrestha M, Hiltunen E, Martikainen J (2015) Robotic arc welding sensors and programming in industrial applications. Int J Mech Mater Eng 10. https://doi.org/10.1186/s40712-015-0042-y

88.

Zhang Z, Chen S (2017) Real-time seam penetration identification in arc welding based on fusion of sound, voltage and spectrum signals. J Intell Manuf 28:207–218. https://doi.org/10.1007/s10845-014-0971-yCrossRef

89.

Zhang ZF, Chen HB, Xu YL, Zhong JY, Lv N, Chen SB (2015) Multisensor-based real-time quality monitoring by means of feature extraction, selection and modeling for Al alloy in arc welding. Mech Syst Signal Process 60:151–165. https://doi.org/10.1016/j.ymssp.2014.12.021CrossRef

90.

Zhang Z, Yu H, Lv N, Chen SB (2013) Real-time defect detection in pulsed GTAW of Al alloys through on-line spectroscopy. J Mater Process Technol 213:1146–1156. https://doi.org/10.1016/j.jmatprotec.2013.01.012CrossRef

91.

Huang YM, Chen SB (2020) Key technologies of intelligentized welding manufacturing-the spectral diagnosis technology for pulsed gas tungsten arc welding of aluminum alloys, Springer

92.

Li PJ, Zhang YM (2001) Precision sensing of arc length in GTAW based on arc light spectrum. J Manuf Sci Eng Trans ASME 123:62–65. https://doi.org/10.1115/1.1349719CrossRef

93.

Yu H, Chen SB (2011) A study of arc length in pulsed GTAW of aluminum alloy by means of arc plasma spectrum analysis. In: Robotic welding, intelligence and automation. Springer, Berlin, Heidelberg, pp 219–227

94.

Orbitalum GmbH. https://www.orbitalum.com/en/products/product-details/orbimat_300_ca.html. Accessed 2021-06-24

95.

Keyhole TIG Limited. https://www.k-tig.com/2017-blog/22-welding-automation-technologies-to-improve-productivity

96.

Polysoude tube to tubesheet welding heads. https://www.polysoude.com/orbital-and-automated-welding/orbital-tube-to-tubesheet-welding. Accessed 2021-06-24

97.

Karafi MR, Narimani R, Hojjat Y, Gheybi M (2010) Study on automatic control of arc gap in robotic TIG welding. Int J Adv Manuf Technol 50:953–960. https://doi.org/10.1007/s00170-010-2564-zCrossRef

98.

Xu YL, Yu HW, Zhong JY, Lin T, Chen SB (2012) Real-time seam tracking control technology during welding robot GTAW process based on passive vision sensor. J Mater Process Technol 212:1654–1662. https://doi.org/10.1016/j.jmatprotec.2012.03.007CrossRef

99.

Thomsen JS (2005) Feedback linearization based arc length control for gas metal arc welding. In: Proceedings of the American control conference. pp 3568–3573

100.

Hu P, Huang J, Zeng M (2017) Application of fuzzy control method in gas metal arc welding. Int J Adv Manuf Technol 92:1769–1775. https://doi.org/10.1007/s00170-017-0245-xCrossRef

101.

Wang Q, Qi B, Cong B, Yang M (2017) Output characteristic and arc length control of pulsed gas metal arc welding process. J Manuf Process 29:427–437. https://doi.org/10.1016/j.jmapro.2017.08.007CrossRef

102.

Chen F (2017) Study on arc length automation control of TIG welding. Southwest Jiaotong University, Southwest Jiaotong

103.

Mousavi Anzehaee M, Haeri M (2011) Welding current and arc voltage control in a GMAW process using ARMarkov based MPC. Control Eng Pract 19:1408–1422. https://doi.org/10.1016/j.conengprac.2011.07.015CrossRef

104.

Zhou J, Zhou Y, Wang B, Zang J (2019) Human–cyber–physical systems (HCPSs) in the context of new-generation intelligent manufacturing. Engineering 5:624–636. https://doi.org/10.1016/j.eng.2019.07.015CrossRef

105.

Wang Q, Jiao W, Zhang YM (2020) Deep learning-empowered digital twin for visualized weld joint growth monitoring and penetration control. J Manuf Syst 57:429–439. https://doi.org/10.1016/j.jmsy.2020.10.002CrossRef

106.

Wang Q, Jiao W, Wang P, Zhang YM (2021) Digital twin for human-robot interactive welding and welder behavior analysis. IEEE/CAA J Autom Sin 8:334–343. https://doi.org/10.1109/JAS.2020.1003518CrossRef

107.

Gopalakrishnan S, Hartman NW, Sangid MD (2020) Model-based feature information network (MFIN): a digital twin framework to integrate location-specific material behavior within component design, manufacturing, and performance analysis. Integr Mater Manuf Innov 9:394–409. https://doi.org/10.1007/s40192-020-00190-4CrossRef

Titel: The development of tube-to-tubesheet welding from automation to digitization
verfasst von: Ting Lei
Chaoqun Wu
Youmin Rong
Yu Huang
Publikationsdatum: 25.06.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07379-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2021

Correction to: Measuring the supporting slats of laser cutting machines using laser triangulation

Improvement weldability of dissimilar joints (Ti6Al4V/Al6013) for aerospace industry by laser beam welding

Machining performance of oil-based SiO2-derived rice husk ash nanofluid for the machining of aluminum alloy

Research on warpage in roll forming of the hat-shaped part using a five-boundary condition forming angle distribution function

Spark plasma sintering of polymer and polymer-based composites: a review

Theoretical modeling and machining experiments of cylindrical microstructure assisted by single-point diamond turning

Premium Partner

Marktübersichten