nach oben

Polymer Bulletin

Erschienen in:

29.03.2017 | Original Paper

The excellent gas barrier properties and unique mechanical properties of poly(propylene carbonate)/organo-montmorillonite nanocomposites

verfasst von: Junjun Kong, Zonglin Li, Zenwen Cao, Changyu Han, Lisong Dong

Erschienen in: Polymer Bulletin | Ausgabe 12/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Intercalated nanocomposites comprised of poly(propylene carbonate) (PPC) and organo-montmorillonite (OMMT) were prepared via a direct melt blending method. The morphological, thermal, rheological, mechanical, and gas barrier properties of composites were carried out in detail. Results of XRD, TEM, and SEM revealed that OMMT dispersed homogeneously in the polymer matrix, and were intercalated by PPC macromolecules. Compared with neat PPC, the PPC/OMMT nanocomposites showed an enhancement in the 5 wt% weight loss temperature (T _−5%) by near 20 °C with 3 phr OMMT concentration. With the percolation threshold formed, the rheological properties of composites translated from a liquid-like behavior to a solid-like one. Interestingly, PPC/OMMT nanocomposites revealed a concurrent improvement in the modulus, yield strength, and toughness with the addition of homogeneously dispersed clay. The oxygen permeability of well-dispersed PPC/OMMT nanocomposites reduced significantly compared with that of neat PPC. Consequently, this convenient and effective method, which facilitates to prepare PPC/OMMT nanocomposites with superior mechanical properties and excellent gas barrier performances, can be considered to broaden the application of PPC.

Vorheriger Artikel UV-curable hyperbranched urethane acrylate oligomers modified with different fatty acids

Nächster Artikel Change of thermal properties of polyamide-6,6/glass fiber composite by the addition of nigrosine

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Cui Y, Kumar S, Rao Kona B, van Houcke D (2015) Gas barrier properties of polymer/clay nanocomposites. RSC Adv 5(78):63669–63690. doi:10.1039/c5ra10333a CrossRef

Inoue SKH, Tsuruta T (1969) Copolymerization of carbon dioxide and epoxide. J Polym Sci Part B Polym Lett 7:287–292CrossRef

Chen S, Chen B, Fan J, Feng J (2015) Exploring the application of sustainable poly(propylene carbonate) copolymer in toughening epoxy thermosets. ACS Sustain Chem Eng 3(9):2077–2083. doi:10.1021/acssuschemeng.5b00343 CrossRef

Barreto C, Hansen E, Fredriksen S (2012) Novel solventless purification of poly(propylene carbonate): tailoring the composition and thermal properties of PPC. Polym Degrad Stab 97(6):893–904. doi:10.1016/j.polymdegradstab.2012.03.033 CrossRef

Yao M (2011) Modification of poly(lactic acid)/poly(propylene carbonate) blends through melt compounding with maleic anhydride. Express Polym Lett 5(11):937–949. doi:10.3144/expresspolymlett.2011.92 CrossRef

J-y Park, Lee E-S, Amna T, Jang Y, Park DH, Kim B-S (2016) Effects of heat-treatment on surface morphologies, mechanical properties of nanofibrous poly(propylene carbonate) biocomposites and its cell culture. Colloids Surf A 492:138–143. doi:10.1016/j.colsurfa.2015.11.075 CrossRef

Hwang SW, Park DH, Kang DH, Lee SB, Shim JK (2016) Reactive compatibilization of poly(l-lactic acid)/poly(propylene carbonate) blends: thermal, thermomechanical, and morphological properties. J Appl Polym Sci 133 (18):1–10. doi:10.1002/app.43388

Manavitehrani I, Fathi A, Wang Y, Maitz PK, Dehghani F (2015) Reinforced Poly(Propylene Carbonate) Composite with Enhanced and Tunable Characteristics, an Alternative for Poly(lactic Acid). ACS Appl Mater Interfaces 7(40):22421–22430. doi:10.1021/acsami.5b06407 CrossRef

Yang G, Hu X, Su J, Geng C, Yao W, zhang Q, Fu Q (2013) Significant reinforcement of poly(propylene carbonate): nanostructured polymer composites of poly(propylene carbonate)/poly(methyl methacrylate) via a supercritical carbon dioxide route. J Supercrit Fluids 82:200–205. doi:10.1016/j.supflu.2013.08.003 CrossRef

10.

Giannelis EP (1996) Polymer layered silicate nanocomposites. Adv Mater 8(1):29–35. doi:10.1002/adma.19960080104 CrossRef

11.

Giannelis EP, Krishnamoorti R, Manias E (1999) Polymer-silicate nanocomposites: model systems for confined polymers and polymer brushes. Polym Confin Environ 138:107–147CrossRef

12.

Kiliaris P, Papaspyrides CD (2010) Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy. Prog Polym Sci 35(7):902–958. doi:10.1016/j.progpolymsci.2010.03.001 CrossRef

13.

LeBaron PC, Wang Z, Pinnavaia TJ (1999) Polymer-layered silicate nanocomposites: an overview. Appl Clay Sci 15(1–2):11–29. doi:10.1016/s0169-1317(99)00017-4 CrossRef

14.

Choudalakis G, Gotsis AD (2009) Permeability of polymer/clay nanocomposites: a review. Eur Polym J 45(4):967–984. doi:10.1016/j.eurpolymj.2009.01.027 CrossRef

15.

Du A, Genero A, Koo D, Sundararaj U, Cairncross R (2012) Water transport in polylactide and polylactide/montmorillonite composites. J Polym Environ 21(1):8–15. doi:10.1007/s10924-012-0540-4 CrossRef

16.

Żenkiewicz M, Richert J (2008) Permeability of polylactide nanocomposite films for water vapour, oxygen and carbon dioxide. Polym Test 27(7):835–840. doi:10.1016/j.polymertesting.2008.06.005 CrossRef

17.

Kawasumi M (2004) The discovery of polymer-clay hybrids. J Polym Sci Polym Chem 42(4):819–824. doi:10.1002/pola.10961 CrossRef

18.

Kojima Y, Usuki A, Kawasumi M, Okada A, Kurauchi T, Kamigaito O (1993) Synthesis of nylon-6-clay hybrid by montmorillonite intercalated with epsilon-caprolactam. J Polym Sci Polym Chem 31(4):983–986. doi:10.1002/pola.1993.080310418 CrossRef

19.

Kojima Y, Usuki A, Kawasumi M, Okada A, Kurauchi T, Kamigaito O (1993) One-pot synthesis of nylon-6 clay hybrid. J Polym Sci Polym Chem 31(7):1755–1758. doi:10.1002/pola.1993.080310714 CrossRef

20.

Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28(11):1539–1641. doi:10.1016/j.progpolymsci.2003.08.002 CrossRef

21.

Shi X, Gan Z (2007) Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation. Eur Polym J 43(12):4852–4858. doi:10.1016/j.eurpolymj.2007.09.024 CrossRef

22.

Takahashi S, Goldberg HA, Feeney CA, Karim DP, Farrell M, O’Leary K, Paul DR (2006) Gas barrier properties of butyl rubber/vermiculite nanocomposite coatings. Polymer 47(9):3083–3093. doi:10.1016/j.polymer.2006.02.077 CrossRef

23.

Khan SB, Akhtar K, Seo J, Han H, Rub MA (2012) Effect of nano-filler dispersion on the thermal, mechanical and water sorption properties of green environmental polymer. Chinese J Polym Sci 30(5):735–743. doi:10.1007/s10118-012-1168-5 CrossRef

24.

Xu J, Li RKY, Meng YZ, Mai YW (2006) Biodegradable poly(propylene carbonate)/montmorillonite nanocomposites prepared by direct melt intercalation. Mater Res Bull 41(2):244–252. doi:10.1016/j.materresbull.2005.08.019 CrossRef

25.

Xu J, Li RKY, Xu Y, Li L, Meng YZ (2005) Preparation of poly(propylene carbonate)/organo-vermiculite nanocomposites via direct melt intercalation. Eur Polym J 41(4):881–888. doi:10.1016/j.eurpolymj.2004.10.033 CrossRef

26.

Tunc S, Duman O (2010) Preparation and characterization of biodegradable methyl cellulose/montmorillonite nanocomposite films. Appl Clay Sci 48:414–424. doi:10.1016/j.clay.2010.01.016 CrossRef

27.

Chen B, Evans JRG (2006) Poly(ε-caprolactone)—clay nanocomposites structure and mechanical properties. Macromolecules 39:747–754CrossRef

28.

Chen G-X (2005) Role of epoxy groups on clay surface in the improvement of morphology of poly(l-lactide)-clay composites. Macromolecules 38:3738–3744CrossRef

29.

Diez-Pascual AM, Diez-Vicente AL (2014) Poly(3-hydroxybutyrate)/ZnO bionanocomposites with improved mechanical, barrier and antibacterial properties. Int J Mol Sci 15(6):10950–10973. doi:10.3390/ijms150610950 CrossRef

30.

Lee Y, Kim D, Seo J, Han H, Khan SB (2013) Preparation and characterization of poly(propylene carbonate)/exfoliated graphite nanocomposite films with improved thermal stability, mechanical properties and barrier properties. Polym Int 62(9):1386–1394. doi:10.1002/pi.4434 CrossRef

31.

Lee KJ, Lee DK, Kim YW, choe W-S, Kim JH (2007) Theoretical consideration on the glass transition behavior of polymer nanocomposites. J Polym Sci Part B Polym Phys 45(16):2232–2238. doi:10.1002/polb.21178 CrossRef

32.

Zhang Z, Lee J-H, Lee S-H, Heo S-B, Pittman CU (2008) Morphology, thermal stability and rheology of poly(propylene carbonate)/organoclay nanocomposites with different pillaring agents. Polymer 49(12):2947–2956. doi:10.1016/j.polymer.2008.04.034 CrossRef

33.

Qinghai Z, Fengxiang G, Huimin L, Xianhong W, Xiaojiang Z, Fosong W (2008) Thermal and mechanical properties of Poly(propylene carbonate) nanocomposites with various organo-modified montmorillonites. Acta polym Sinica 1(12):1123–1128. doi:10.3724/SP.J.1105.2008.01123

34.

Pluta M, Jeszka JK, Boiteux G (2007) Polylactide/montmorillonite nanocomposites: structure, dielectric, viscoelastic and thermal properties. Eur Polym J 43(7):2819–2835. doi:10.1016/j.eurpolymj.2007.04.009 CrossRef

35.

Piekarska K, Sowinski P, Piorkowska E, Haque MMU, Pracella M (2016) Structure and properties of hybrid PLA nanocomposites with inorganic nanofillers and cellulose fibers. Compos A 82:34–41. doi:10.1016/j.compositesa.2015.11.019 CrossRef

36.

Xu Y-Q, Qu J-P (2009) Mechanical and rheological properties of epoxidized soybean oil plasticized poly(lactic acid). J Appl Polym Sci 112(6):3185–3191. doi:10.1002/app.29797 CrossRef

37.

Thellen C, Orroth C, Froio D, Ziegler D, Lucciarini J, Farrell R, D’Souza NA, Ratto JA (2005) Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films. Polymer 46(25):11716–11727. doi:10.1016/j.polymer.2005.09.057 CrossRef

38.

Wilson R, Plivelic TS, Aprem AS, Ranganathaiagh C, Kumar SA, Thomas S (2012) Preparation and characterization of EVA/clay nanocomposites with improved barrier performance. J Appl Polym Sci 123(6):3806–3818. doi:10.1002/app.34966 CrossRef

Titel: The excellent gas barrier properties and unique mechanical properties of poly(propylene carbonate)/organo-montmorillonite nanocomposites
verfasst von: Junjun Kong
Zonglin Li
Zenwen Cao
Changyu Han
Lisong Dong
Publikationsdatum: 29.03.2017
Verlag: Springer Berlin Heidelberg
Erschienen in: Polymer Bulletin / Ausgabe 12/2017
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-017-2002-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2017

Evaluation of whey protein isolate-graft-carbopol-polyacrylamide pH-sensitive composites for controlled release of pamidronate

Structure and properties of polycaprolactone/ibuprofen rods prepared by melt extrusion for implantable drug delivery

Synthesis, characterization and application of a novel zinc(II) ion-imprinted polymer

Optimization of the vulcanization parameters for ethylene–propylene–diene termonomer (EPDM)/ground waste tyre composite using response surface methodology

Post-electrospinning thermal treatments on poly(4-methyl-1-pentene) nanofiber membranes for improved mechanical properties

Use of apple seeds as new source for synthesis of polyacrylonitrile-based adsorbent to remove Pb(II)

Premium Partner

Marktübersichten