2016 | OriginalPaper | Buchkapitel
The Influence of Deformation Mechanisms on Rupture of AZ31B Magnesium Alloy Sheet at Elevated Temperatures
verfasst von : Aravindha R. Antoniswamy, Alexander J. Carpenter, Jon T. Carter, Louis G. Hector Jr., Eric M. Taleff
Erschienen in: Magnesium Technology 2013
Verlag: Springer International Publishing
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Gas-pressure bulge tests were conducted on Mg alloy AZ31B wrought sheet until rupture at temperatures from 250 to 450°C. The rupture orientation was observed to change with forming pressure, which controls the forming strain rate, at 350 to 450°C. This phenomenon is a result of associated changes in the mechanisms of plastic deformation. At slow strain rates (≤ 3 × 10−2 s−1), cavity interlinkage associated with grain boundary sliding (GBS) creep induced rupture along the sheet rolling direction (RD). At fast strain rates (≥ 3 × 10−2 s−1), flow localization (necking) associated with dislocation-climb-controlled (DC) creep induced rupture along the long-transverse direction (LTD), a result of mild planar anisotropy. Biaxial bulge specimens tested at 250 to 300°C ruptured explosively, hence preventing any further analysis.