Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2018

Ausgabe 1-4/2018

Inhaltsverzeichnis ( 120 Artikel )

16.09.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A new model of sustainable product development process for making trade-offs

Meysam Salari, Nadia Bhuiyan

14.10.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A robust butt welding seam finding technique for intelligent robotic welding system using active laser vision

Jawad Muhammad, Halis Altun, Essam Abo-Serie

17.10.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2018 Open Access

Strategic maintenance technique selection using combined quality function deployment, the analytic hierarchy process and the benefit of doubt approach

Rahul Baidya, Prasanta Kumar Dey, Sadhan Kumar Ghosh, Konstantinos Petridis

22.10.2016 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Theoretical analysis and experimental investigations on the symmetrical three-roller setting round process

Gaochao Yu, Jun Zhao, Ruixue Zhai, Rui Ma, Chunge Wang

26.05.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Response to Cuckoo optimization algorithm for unit production cost in multi-pass turning operations [Int J AdvManufTechnol (2015) 76(1):647–656]

A. Costa, S. Fichera

15.07.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Formation mechanism and control of flaring in forward tube spinning

Mei Zhan, J. Guo, M. W. Fu, R. Li, P. F. Gao, H. Long, F. Ma

27.07.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Stripping failure of punching pin in GPa-grade steels

Chanhee Won, Seokryul Lee, Jihoon Seo, Sung Hyuk Park, Jonghun Yoon

05.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Performance study of multilayer carbide tool in high-speed turning of API 5L X70 pipeline steel using a cold air system

Étory Madrilles Arruda, Lincoln Cardoso Brandão

07.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Effect of motion accuracy on material removal during the CMP process for large-aperture plane optics

C. P. Zhang, H. Y. Zhao, R. Q. Xie, Z. X. Zhao, Y. W. Gu, Z. D. Jiang

07.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Molecular dynamics analysis of nanomachining of rapidly solidified aluminium

T. Otieno, K. Abou-El-Hossein

08.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Study of thermal forming limit of medium-Mn steel based on finite element analysis and experiments

Guojun Zheng, Ying Chang, Zhiyuan Fan, Xiaodong Li, Cunyu Wang, Han Dong

08.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Rectifying inspection for PAOSQLL scheme based on variable repetitive group sampling plan

Ikuo Arizono, Yusuke Okada, Ryosuke Tomohiro, Yasuhiko Takemoto

08.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Long-pulse quasi-CW laser cutting of metals

Adrian H. A. Lutey, Alessandro Ascari, Alessandro Fortunato, Luca Romoli

08.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Hot V-bending behavior of pre-deformed pure titanium sheet assisted by electrical heating

Daming Nie, Zhen Lu, Kaifeng Zhang

09.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Analytical approach of asymmetrical thermomechanical rolling by slab method

N. A. Razani, B. Mollaei Dariani, M. Soltanpour

09.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Application of Markov chain for LCA: a study on the clothes ‘reuse’ in Nordic countries

Manoj Kumar Paras, Rudrajeet Pal

09.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Modeling of non-linear cutting forces for dry orbital drilling process based on undeformed chip geometry

Lan Zhou, Huiyue Dong, Yinglin Ke, Guanglin Chen

09.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Dependence of electromagnetic force on rib geometry in the electromagnetic forming of stiffened panels

Xinpeng Lei, Jinqiang Tan, Mei Zhan, Pengfei Gao

09.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A pyramid-shaped machining test to identify rotary axis error motions on five-axis machine tools: software development and a case study

Soichi Ibaraki, Shota Tsujimoto, Yu Nagai, Yasutaka Sakai, Shigeki Morimoto, Yosuke Miyazaki

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Improvement of overall equipment efficiency of ring frame through total productive maintenance: a textile case

Nafis Ahmad, Jamal Hossen, Syed Mithun Ali

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Extracting the turning volume and features for a mill/turn part with multiple extreme faces

Lianhua Liu, Zhengdong Huang, Wei Liu, Wenbo Wu

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Fracture mechanism of polycrystalline cubic boron nitride abrasive grains during single-grain grinding of Ti-6Al-4V titanium alloy

Jingwei Wang, Wenfeng Ding, Yejun Zhu, Wei Xu, Changyong Yang

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Numerical investigations on the effect of pit on two-step dimple forming of atomic fuel spacer grid

Karuppasamy Pandian Marimuthu, Wanseop Choi, Naksoo Kim, Hyungyil Lee

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018 Open Access

Performance evaluation of the grinding wheel with aggregates of grains in grinding of Ti-6Al-4V titanium alloy

W. Kacalak, D. Lipiński, B. Bałasz, Ł. Rypina, K. Tandecka, F. Szafraniec

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Defect classification of laser metal deposition using logistic regression and artificial neural networks for pattern recognition

Haythem Gaja, Frank Liou

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Quality assessment of resistance spot welding process based on dynamic resistance signal and random forest based

Bobin Xing, Yi Xiao, Qing H. Qin, Hongzhi Cui

10.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Effects of sliding speed and lubrication on the tribological behaviour of stainless steel

Jicheng Shen, Chuhan Wu, Liangchi Zhang

11.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Wire-EDM: a potential manufacturing process for gamma titanium aluminides in future aero engines

S. Anurag

11.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Process parameters optimization using a novel classification model for plastic injection molding

Huang Gao, Yun Zhang, Yang Fu, Ting Mao, Huamin Zhou, Dequn Li

11.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Influence of tool path strategies on fatigue performance of high-speed ball-end-milled AISI H13 steel

Weimin Huang, Jun Zhao, Ai Xing, Guijie Wang, Haiwang Tao

11.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A quantitative investigation of distortion of polylactic acid/PLA) part in FDM from the point of interface residual stress

Hongbin Li, Taiyong Wang, Qing Li, Zhiqiang Yu, Na Wang

11.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Predictive modeling and the effect of process parameters on the hardness and bead characteristics for laser-cladded stainless steel

Mohammad K. Alam, Ruth Jill Urbanic, Navid Nazemi, Afsaneh Edrisy

11.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Delegate MASs for coordination and control of one-directional AGV systems: a proof-of-concept

Branislav Micieta, Milan Edl, Martin Krajcovic, Luboslav Dulina, Peter Bubenik, Lukas Durica, Vladimira Binasova

11.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Changeover process improvement based on modified SMED method and other process improvement tools application: an improvement project of 5-axis CNC machine operation in advanced composite manufacturing industry

Rosmaini Ahmad, Mohd Syazwan Faiz Soberi

12.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A circumscribed corner rounding method based on double cubic B-splines for a five-axis linear tool path

Fuyang Xu, Yuwen Sun

12.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Physically based modeling method for comprehensive thermally induced errors of CNC machining centers

Kuo Liu, Tiejun Li, Yongqing Wang, Mingjia Sun, Yuliang Wu, Tiejun Zhu

12.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Service level-based production smoothening model for robust cellular manufacturing system

Subhaa R., Jawahar Natarajan

12.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Welding parameters effect in GMAW fusion efficiency evaluation

William Hackenhaar, Arnaldo R. Gonzalez, Ivan G. Machado, José A. E. Mazzaferro

12.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Evaluating the effectiveness of spatial augmented reality in smart manufacturing: a solution for manual working stations

Antonio E. Uva, Michele Gattullo, Vito M. Manghisi, Daniele Spagnulo, Giuseppe L. Cascella, Michele Fiorentino

12.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

An adaptive repair surface modeling approach for worn blades

Feiru Hou, Neng Wan, Zhiyong Chang, Zezhong Chen, Huibin Sun

14.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Identification and compensation of 11 position-independent geometric errors on five-axis machine tools with a tilting head

Hui Yang, Xiaodiao Huang, Shuang Ding, Chunjian Yu, Yameng Yang

14.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

FIS-SMED: a fuzzy inference system application for plastic injection mold changeover

M. Kemal Karasu, Latif Salum

14.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Numerical generation of grinding wheel surfaces based on time series method

Dongri Liao, Wen Shao, Jinyuan Tang, Jianping Li, Xuan Tao

14.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Formability and performance of 6K21-T4 aluminum automobile panels in VPF under variable blank holder force

Li-huang Zheng, Zhong-jin Wang, Zhang-guang Liu, Hui Song

15.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

An optimal approach to manufacturing planning for complex prismatic parts with interacting feature

Zujie Zheng, Qiusen Wang, Guolei Zheng, Junbiao Zhu

15.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Three-dimensional finite element modeling of drilling CFRP composites using Abaqus/CAE: a review

Gong-Dong Wang, Stephen Kirwa Melly

15.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Reverse logistics network design: a case of mobile phones and digital cameras

Sajan T. John, R. Sridharan, P. N. Ram Kumar

15.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Evaluation of EDM process for green manufacturing

Xianlin Wang, Le Chen, Binbin Dan, Fei Wang

15.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Influencing mechanism of the key parameters during bonnet polishing process

Ri Pan, Bo Zhong, Zhenzhong Wang, Shuting Ji, Dongju Chen, Jinwei Fan

15.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Enhanced machining performance and lubrication mechanism of electrostatic minimum quantity lubrication-EMQL milling process

Shuiquan Huang, Tao Lv, Minghuan Wang, Xuefeng Xu

16.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Distortion analysis of heat spot straightening thin-walled welded structures: part 1: formation of the plastic deformation zone

Nikolay Doynov, Vesselin Georgiev Michailov

16.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

The multi-objective non-probabilistic interval optimization of the loading paths for T-shape tube hydroforming

Tianlun Huang, Xuewei Song, Min Liu

17.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Theoretical and experimental study of slotting CFRP material with segmented helix tool

Souhir Gara, Oleg Tsoumarev

17.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

An optimization method of tool-path parameters for curved surface by construction of cutter location mesh units

Jian-wei Ma, Wei-wei Su, Zhen-yuan Jia, De-ning Song, Guo-qing Hu

17.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Experimental study on planetary electric discharge machining of substrate of large-aperture silicon carbide (SiC) mirrors

Geng Qidong, Wang Wei

17.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Optimization of porthole die extrusion by Grey-Taguchi relational analysis

Francesco Gagliardi, Claudio Ciancio, Giuseppina Ambrogio

17.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Modularity assessment in reconfigurable manufacturing system (RMS) design: an Archived Multi-Objective Simulated Annealing-based approach

Hichem Haddou Benderbal, Mohammed Dahane, Lyes Benyoucef

18.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A delayed optimal control model for multi-stage production-inventory system with production lead times

Alireza Pooya, Morteza Pakdaman

18.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Surface integrity in precision turning of steel

Melanie Willert, Oltmann Riemer, Ekkard Brinksmeier

18.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Effects of rapid solidification on the microstructure and surface analyses of laser-deposited Al-Sn coatings on AISI 1015 steel

M. E. Makhatha, O. S. Fatoba, E. T. Akinlabi

18.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A review of micro-mechanical cutting

Brian Boswell, M. N. Islam, Ian J. Davies

18.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Prediction of gas entrapment defects during zinc alloy high-pressure die casting based on gas-liquid multiphase flow model

Liu Cao, Dunming Liao, Fei Sun, Tao Chen, Zihao Teng, Yulong Tang

18.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Reliability prediction of the stress concentration factor using response surface method

Mhalla Mohamed Makki, Bahloul Ahmed, Bouraoui Chokri

19.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Characterization of heat-treated gas metal arc-welded boron steel sheets

K. I. Yaakob, M. Ishak, S. R. A. Idris, M. H. Aiman, M. M. Quazi

19.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Cable-type welding wire arc welding

Yong Chen, Chenfu Fang, Zhidong Yang, Jiayou Wang, Guoxiang Xu, Xiaoyan Gu

19.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Microstructures and high-temperature strength of gel-casting Al2O3-based ceramic molds with coated aluminum additive

Zhongliang Lu, Yi Chen, Kai Miao, Wenliang Xu, Tao Liu, Qiang Yang, Dichen Li

21.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A disk tool cutting method for bevel gear manufacture on a five-axis machine

Yi-Pei Shih, Zi-Heng Sun, Fu-Chuan Wu

21.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

An investigation on flaring process of thin-walled tubes using multistage single point incremental forming

Hamed Movahedinia, Mohammad Javad Mirnia, Majid Elyasi, Hamid Baseri

21.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Investigation of ionic liquids as additives to canola oil in minimum quantity lubrication milling of plain medium carbon steel

G. S. Goindi, P. Sarkar, A. D. Jayal, S. N. Chavan, D. Mandal

21.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A numerical and experimental study to investigate convective heat transfer and associated cutting temperature distribution in single point turning

Salman Pervaiz, Ibrahim Deiab, Essam Wahba, Amir Rashid, Mihai Nicolescu

22.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

An extensible NC program interpreter for open CNC systems

Weixin Wang, Kai Zhou

22.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Cutting of AA6061 by a multimode pulsed Nd:YAG laser with high pressure gas: characterisation of kerf geometry and quality

C. Leone, S. Genna, V. Tagliaferri

23.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Online compensation of force-induced deformation for high-precision riveting machine based on force–displacement data analysis

Yilian Zhang, Qingzhen Bi, Long Yu, Yuhan Wang

23.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Classification of facility layout problems: a review study

Hasan Hosseini-Nasab, Sepideh Fereidouni, Seyyed Mohammad Taghi Fatemi Ghomi, Mohammad Bagher Fakhrzad

23.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Influence of alternating side gap on micro-hole machining performances in micro-EDM

Zhengkai Li, Jicheng Bai

23.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Methods and tools for the optimal adaptable design of open-architecture products

Yongliang Chen, Qingjin Peng, Peihua Gu

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Reducing surface roughness by varying aerosol temperature with minimum quantity lubrication in machining AISI P20 and D2 steels

S. W. M. A. I. Senevirathne, H. K. G. Punchihewa

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Microstructure characterization and mechanical behavior of dissimilar friction stir welded Al/Cu couple with different joint configurations

Wei Zhang, Yifu Shen, Yinfei Yan, Rui Guo, Wei Guan, Guolin Guo

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Reinforced lubrication of vegetable oils with graphene additive in tapping ADC12 aluminum alloy

Jing Ni, Guodong Feng, Zhen Meng, Tao Hong, Yebo Chen, Xin Zheng

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM

Zheng Li, Xinyu Wang, Junfeng Gu, Shilun Ruan, Changyu Shen, Yan Lyu, Yang Zhao

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

5-Axis CNC incremental forming toolpath generation based on formability

Hu Zhu, Huayi Li

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Nd:YAG pulsed laser welding of dissimilar metals of titanium alloy to stainless steel

Y. Zhang, D. Q. Sun, X. Y. Gu, H. M. Li

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Recycling welding rod residuals based on development of a top-down nanomanufacturing system employing indexing equal channel angular pressing

Michael W. Hester, John M. Usher

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Thermal optimization of the continuous casting process using distributed parameter identification approach—controlling the curvature of solid-liquid interface

Rouhollah Tavakoli

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Prediction of the critical cutting conditions of serrated chip in high speed machining based on linear stability analysis

Guohe Li, Yujun Cai, Houjun Qi

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Evaluation of the characteristics of diamond grinding wheels at their production and operation stages

J. Kundrák, A. G. Mamalis, V. Fedorovich, I. Pyzhov, N. Kryukova

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A novel modelling method of geometric errors for precision assembly

Zhongqing Zhang, Zhijing Zhang, Xin Jin, Qiushuang Zhang

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A study on the mechanisms of the CWW SAW process

Zhidong Yang, Chenfu Fang, Mingfang Wu, Kai Qi, Yong Chen, Zhengdong Zhang

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Impact of electrode length on EDM inclined hole drilling process

Qing Gao

24.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Effect of magnetic field on anodic dissolution in electrochemical machining

Li Long, M. A. Baoji

25.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Inverse problem-based analysis on non-uniform thermo-mechanical behaviors of slab during continuous casting

Fengming Du, Xudong Wang, Jingguo Fu, Xiaoguang Han, Jiujun Xu, Man Yao

25.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Methodology of automated and robust and rapid layout of standard part for multi-plate die based on distributed assembly modeling strategy

Yang Wei, Zhen Wang, Zhibing Zhang, Yuqi Liu, Xinliang Yuan

25.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A welding quality detection method for arc welding robot based on 3D reconstruction with SFS algorithm

Lei Yang, En Li, Teng Long, Junfeng Fan, Yijian Mao, Zaojun Fang, Zize Liang

25.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Wear behavior of monolayer-brazed CBN wheels with small diameter during internal traverse grinding

Shaowu Gao, Changyong Yang, Jiuhua Xu, Hao Su, Yucan Fu, Wenfeng Ding

25.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Experimental analysis of rough surface topography and modifying the humidity effect in AFM images to improve the topography quality

A. H. Korayem, M. Taghizadeh, M. Abdi, M. H. Korayem

25.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Early chatter identification of robotic boring process using measured force of dynamometer

Guifeng Wang, Huiyue Dong, Yingjie Guo, Yinglin Ke

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Interface characteristic and tensile property of friction stir lap welding of dissimilar aircraft 2060-T8 and 2099-T83 Al–Li alloys

Xiangchen Meng, Zheng Xu, Yongxian Huang, Yuming Xie, Yaobin Wang, Long Wan, Zongliang Lv, Jian Cao

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018 Open Access

The estimation of machining results and efficiency of the abrasive electro-discharge grinding process of Ti6Al4V titanium alloy using the high-frequency acoustic emission and force signals

Paweł Sutowski, Robert Święcik

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Online machine health prognostics based on modified duration-dependent hidden semi-Markov model and high-order particle filtering

Qili Xiao, Yilin Fang, Quan Liu, Shujuan Zhou

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A comparative study on state of oxide layer in ELID grinding with tool-cathode and workpiece-cathode

Zhiqiang Wang, Chengzu Ren, Guang Chen, Lifeng Zhang, Xiaofan Deng

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Additively manufactured multi-material free-form structure with printed electronics

Guo Liang Goh, Shweta Agarwala, Guo Dong Goh, Heang Kuan Joel Tan, Liping Zhao, Tong Kuan Chuah, Wai Yee Yeong

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Residual stress and springback analysis for 304 stainless steel tubes in flexible-bending process

Yongping Zhou, Pengfei Li, Mingzhe Li, Liyan Wang, Shuo Sun

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Surface defect elimination in microgrooving of electroless nickel phosphide plating layer by brittleness enhancement

Yang Liu, Wenxiang Zhao, Tianfeng Zhou, Xin Liu, Xibin Wang

26.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018 Open Access

Modelling of surface roughness and grinding forces using artificial neural networks with assessment of the ability to data generalisation

D. Lipiński, B. Bałasz, Ł. Rypina

28.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Effect of extrusion temperature on the microstructure and tensile property of 2D-Cf/Al composites by liquid extrusion infiltration

Y. Q. Ma, L. H. Qi

28.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Pre-joining processes optimization method for panel orienting to the clearances suppression of units and the clearances flow among units

Wei-Wei Qu, Wei Tang, Ying-Lin Ke

28.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Laser milling of yttria-stabilized zirconia by using a Q-switched Yb:YAG fiber laser: experimental analysis

Stefano Guarino, Gennaro Salvatore Ponticelli, Oliviero Giannini, Silvio Genna, Federica Trovalusci

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

The Bauschinger effect and mechanical properties of AA5754 aluminum alloy in incremental forming process

Xunzhong Guo, Yanbo Gu, Hui Wang, Kai Jin, Jie Tao

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Positioning and navigation system based on machine vision intended for laser-electrochemical micro-hole processing

Guohua Jia, Xia Dong, Quan Huo, Kedian Wang, Xuesong Mei

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Experimental and numerical study of chip formation in orthogonal cutting of Ti-5553 alloy: the influence of cryogenic, MQL, and high pressure coolant supply

Yusuf Kaynak, Armin Gharibi, Melih Ozkutuk

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Active control of high-frequency tool-workpiece vibration in micro-grinding

Xiaohui Jiang, Miaoxian Guo, Beizhi Li

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Grindability evaluation and tool wear during grinding of Ti2AlNb intermetallics

Xinxin Xi, Wenfeng Ding, Yucan Fu, Jiuhua Xu

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

An efficient experimental approach to identify tool point FRF by improved receptance coupling technique

Jingping Liao, Dingwen Yu, Jianfu Zhang, Pingfa Feng, Zhijun Wu

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Study of silicon carbide-reinforced aluminum matrix composite brake rotor for motorcycle application

Sadagopan P., Harish Karthi Natarajan, Praveen Kumar J.

29.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A novel impact load model for tool-changer mechanism of spindle system in machine tool

Huipeng Shen, Huimin Dong, Delun Wang, Yu Wu, Guanglei Wu

30.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

An effective method of edge deburring for laser surface texturing of Co-Cr-Mo alloy

Junde Guo, Yue Li, Hailin Lu, Liguo Qin, Yu Li, Guangneng Dong

30.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

A multi-constraint spinning process of ellipsoidal heads

Guoju Rao, Xinhe Li, Lei Zhou, Shiwu Chang, Quan Cao, Zhaoxiang Yi

30.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Temperature field simulation of the molten pool in SEAM

Xuezhi Li, Jianping Zhou, Kedian Wang, Yan Xu

30.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Study on deep drawing of 304 stainless steel rectangular case with magnetic medium

Cheng Chuang Jin, Feng Li, Ze Ping Bao

30.08.2017 | ORIGINAL ARTICLE | Ausgabe 1-4/2018

Development of a flexible modeling base for additive manufacturing

Chil-Chyuan Kuo, Wei-Hua Chen, Jain-Fu Li, Yi-Jun Zhu

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise