Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2019

Ausgabe 1-4/2019

Inhaltsverzeichnis ( 84 Artikel )

15.12.2018 | Editorial | Ausgabe 1-4/2019

Announcement of B. John Davies Prize for the best paper published in IJAMT in 2017

Anthony Doyle, Andrew Y. C. Nee

20.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Wear study of hot forging punches coated with WC-CoCr and Cr3C2-NiCr through high-velocity oxygen fuel (HVOF) process

Angela Selau Marques, Luana De Lucca de Costa, Giovanni Rocha dos Santos, Alexandre da Silva Rocha

20.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Simplified two-dimensional model for the prediction of pressures and velocities in hot strip rolling

Mohamed Zaaf, Abdelmalek Mebarek, Abdelaaziz Amirat

20.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Finite element simulation of high speed micro milling in the presence of tool run-out with experimental validations

Aldo Attanasio, Andrea Abeni, Tuğrul Özel, Elisabetta Ceretti

20.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

An investigation of the effect of a new tool treatment technique on the machinability of Inconel 718 during the turning process

Saharnaz Montazeri, Maryam Aramesh, Stephen C. Veldhuis

21.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019 Open Access

Language-free graphical signage improves human performance and reduces anxiety when working collaboratively with robots

Iveta Eimontaite, Ian Gwilt, David Cameron, Jonathan M. Aitken, Joe Rolph, Saeid Mokaram, James Law

21.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A high-efficiency generation method of integral impeller channel tool path based on parametric domain template trajectory mapping

Han Feiyan, Zhang Chuanwei, Guo Wei, Peng Xianlong, Zhang Wu

21.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Multi-objective optimization of multi-pass turning AISI 1064 steel

Miroslav Radovanović

22.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A study of the parameters influencing mechanical properties and the fatigue performance of refill friction stir spot welded AlMgSc alloy

Sara Beatriz Miranda Lage, Leonardo Contri Campanelli, Ana Paula de Bribean Guerra, Junjun Shen, Jorge Fernandez dos Santos, Paulo Sergio Carvalho Pereira da Silva, Claudemiro Bolfarini

22.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental study on wrinkle suppressing in multi-pass drawing spinning of 304 stainless steel cylinder

Z. Jia, L. Li, Z. R. Han, Z. J. Fan, B. M. Liu

22.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental and numerical investigation on thin sheet metal roll forming process of micro channels with high aspect ratio

Jihui Huang, Yujun Deng, Peiyun Yi, Linfa Peng

22.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Chatter stability prediction of ball-end milling considering multi-mode regenerations

Jie Zhang, Chengying Liu

22.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of tool nose radius and tool wear on residual stresses distribution while turning in situ TiB2/7050 Al metal matrix composites

Kunyang Lin, Wenhu Wang, Ruisong Jiang, Yifeng Xiong

22.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Material removal mechanism of PTMCs in high-speed grinding when considering consecutive action of two abrasive grains

Huan Zhou, Wenfeng Ding, Chaojie Liu

22.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel

Jiahao Zhu, Peng Yao, Wei Wang, Chuanzhen Huang, Hongtao Zhu, Bin Zou, Hanlian Liu

23.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Critical study on the thermal-structural characteristics of worktable assembly of a dry hobbing machine

Xianguang Li, Yong Yang, Zheng Zou, Zhitao Liu, Li Wang, Qian Tang

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Machinability study of unidirectional CFRP laminates by slot milling

Jianbo Sui, Chengyong Wang

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effects of rotation speed of assisted shoulder on microstructure and mechanical properties of 6061-T6 aluminum alloy by dual-rotation friction stir welding

L. Zhou, R. X. Zhang, X. Y. Hu, N. Guo, H. H. Zhao, Y. X. Huang

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Study on the surface topography in consideration of the dynamic grinding hardening process

Shichao Xiu, Cong Sun, Jinchao Duan, Dongxue Lan, Qingliang Li

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Influences of control error and setting error on machining accuracy of internal gearing power honing

Jiang Han, Yonggang Zhu, Lian Xia, Bin Yuan, Lulu Wu

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Numerical simulation and experimental analysis of wide-beam laser cladding

Huaming Liu, Mingbo Li, Xunpeng Qin, Song Huang, Feng Hong

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Research on the effect of the waveform on the droplet injection behavior of a piezoelectric printhead and the forming accuracy of casting sand molds

Hong Liu, Yang Gao, Shaohu Ding, Fan Peng, Dexin Zhu

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Wire electrochemical micromachining of high-aspect ratio microstructures on stainless steel 304 with 270-μm thickness

Chuanping Gao, Ningsong Qu

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A synchroextracting-based method for early chatter identification of robotic drilling process

Jianfeng Tao, Chengjin Qin, Chengliang Liu

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019 Open Access

Investigating the effect of fabrication temperature on mechanical properties of fused deposition modeling parts using X-ray computed tomography

Amir Reza Zekavat, Anton Jansson, Joakim Larsson, Lars Pejryd

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Study on impact stress of abrasive slurry jet in cutting stainless steel

Chiheng Qiang, Fengchao Wang, Chuwen Guo

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Cross-sectional deformation of thin-walled rectangular tube in small-radius rotary draw bending under different die sets

Mengmeng Liu, Yuli Liu, Hong Zhan

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Investigation and modeling of microgrooves generated on diamond grinding wheel by abrasive waterjet based on Box–Behnken experimental design

Zhenzhong Zhang, Peng Yao, Chuanzhen Huang, Jun Wang, Donglin Xue, Weijie Deng, Zhiyu Zhang

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A physical behavior model including dynamic recrystallization and damage mechanisms for cutting process simulation of the titanium alloy Ti-6Al-4V

D. Yameogo, B. Haddag, H. Makich, M. Nouari

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Micro-stiffener surface characteristics with belt polishing processing for titanium alloys

Guijian Xiao, Yun Huang

24.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental and numerical study of DC04 sheet metal behaviour—plastic anisotropy identification and application to deep drawing

Walid Ghennai, Ouzine Boussaid, Hocine Bendjama, Badis Haddag, Mohammed Nouari

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Zinc-aluminum (ZA-27)-based metal matrix composites: a review article of synthesis, reinforcement, microstructural, mechanical, and corrosion characteristics

Seun Samuel Owoeye, Davies Oladayo Folorunso, Babatunde Oji, Sunday Gbenga Borisade

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Improving cutting performance of carbide twist drill combined internal cooling and micro-groove textures in high-speed drilling Ti6Al4V

Dalin Guo, Xuhong Guo, Kedong Zhang, Yadong Chen, Chichi Zhou, Liwu Gai

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A note on phase characteristic among rollers before thread or spline rolling

Da-Wei Zhang, Bing-Kun Liu, Fang-Fang Xu, Qi Wang, Sheng-Dun Zhao

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

High-speed intermittent turning of GH2132 alloy with Si3N4/(W, Ti)C/Co graded ceramic tool

Xianhua Tian, Jun Zhao, Haifeng Yang, Zhongbin Wang, Hao Liu

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Comparison of mandrel and counter-roller spinning methods for manufacturing large sheaves

Chengcheng Zhu, Shengdun Zhao, Shuaipeng Li, Shuqin Fan

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Reliability assessment for CNC equipment based on degradation data

Chaoqun Duan, Chao Deng, Ning Li

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium

Amlan Kar, Satyam Suwas, Satish V. Kailas

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Towards the understanding of creep-feed deep grinding of DD6 nickel-based single-crystal superalloy

Yulong Gu, Haonan Li, Baicun Du, Wenfeng Ding

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental evaluation of surface topographies of NMQL grinding ZrO2 ceramics combining multiangle ultrasonic vibration

Dongzhou Jia, Changhe Li, Yanbin Zhang, Min Yang, Xianpeng Zhang, Runze Li, Heju Ji

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Determination of multi-direction loading path based on analytical method in forming of multi-cavity parts by considering folding defect

Zhichao Sun, Jing Cao, Hongwei Qiu, Chenghao Zhang, Han Zhang

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Modeling and application of configuration complexity scale: concept for customized production

Slavomir Bednar, Erwin Rauch

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Cutter orientation planning in NC machining for surface similar to revolution body with considering kinematic characteristics

Yonglin Cai, Fenglei Zhang, Xiaolin Xi

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Numerical analysis of the use of clustering balls in spinning-pressing-forming a curved surface

Zhi-Qing Hu, Chao-Fan Guo, Zeng-Ming Feng

25.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Design of casting systems for stainless steel exhaust manifold based on defective prediction model and experimental verification

Jenn-Kun Kuo, Pei-Hsing Huang, Hsin-Yi Lai, Wei-Jen Wu

26.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A force model in single grain grinding of long fiber reinforced woven composite

Jinhua Wei, Haoji Wang, Bin Lin, Tianyi Sui, Feifei Zhao, Sheng Fang

26.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Cyber-physical system for thermal stress prevention in 3D printing process

Guanxiong Miao, Sheng-Jen Hsieh, J. A. Segura, Jia-Chang Wang

26.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Research on micro-deep drawing process of concial part with ultra-thin copper foil using multi-layered DLC film-coated die

C. J. Wang, L. D. Cheng, Y. Liu, H. Zhang, Y. Wang, D. B. Shan, B. Guo

26.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Prediction of cutting force of ball-end mill for pencil-cut machining

Z. C. Wei, M. L. Guo, M. J. Wang, S. Q. Li, S. X. Liu

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019 Open Access

Non-conventional approach in single-sided lapping process: kinematic analysis and parameters optimization

Adam Barylski, Norbert Piotrowski

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Optimization of STL model and layer shape for laser cladding forming

Huadong Zheng, Ming Cong, Dong Liu, Hang Dong, Yi Liu

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Automatic extraction and identification of narrow butt joint based on ANFIS before GMAW

Lei Yang, En Li, Junfeng Fan, Teng Long, Zize Liang

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of lay-up configuration and processing parameters on surface quality during fiber laser cutting of CFRP laminates

Maojun Li, Shuo Li, Xujing Yang, Yi Zhang, Zhichao Liang

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Micro machining of bulk metallic glasses: a review

Lin Zhang, Hu Huang

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Connection status evaluation in arc stud weld joints by ultrasonic detection

Juan Dong, Guocheng Xu, Hongyang Yu, Guoquan Fan, Lingbo Wei, Xiaopeng Gu

01.01.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental analysis of vibration and sound in order to investigate chatter phenomenon in cold strip rolling

Mohammad Reza Niroomand, Mohammad Reza Forouzan, Ali Heidari

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Determining the relationships between the build orientation, process parameters and voids in additive manufacturing material extrusion processes

Hasti Eiliat, Jill Urbanic

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019 Open Access

Pilot capability evaluation of a feedback electronic imaging system prototype for in-process monitoring in electron beam additive manufacturing

Hay Wong, Derek Neary, Eric Jones, Peter Fox, Chris Sutcliffe

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Electromagnetic-assisted calibration for surface part of aluminum alloy with a dedicated uniform pressure coil

Wei Liu, Xifan Zou, Shangyu Huang, Yu Lei

27.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effects of mechanical property parameters on wrinkling behavior of thin-walled tubes in hydroforming process

Xiao-Lei Cui, Xiao-Song Wang, S. J. Yuan

01.12.2018 | Correction | Ausgabe 1-4/2019

Correction to: Effects of mechanical property parameters on wrinkling behavior of thin-walled tubes in hydroforming process

Xiao-Lei Cui, Xiao-Song Wang, S. J. Yuan

28.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Fabrication of micro punching mold for micro complex shape part by micro EDM

Zuyuan Yu, Dongping Li, Junfeng Yang, Zhijie Zeng, Xiaolong Yang, Jianzhong Li

28.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

CAD-based identification of product low-carbon design optimization potential: a case study of low-carbon design for automotive in China

Lei Zhang, Rui Jiang, Zhi-feng Jin, Hai-hong Huang, Xin-yu Li, Yan-jiu Zhong

28.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Enhancements on strength of body structure due to bake hardening effect on hot stamping steel

Marcos Roberto de Castro, Waldemar Alfredo Monteiro, Rodolfo Politano

28.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Value chain and production cost optimization by integrating additive manufacturing in injection molding process chain

Guido Tosello, Alessandro Charalambis, Laoucine Kerbache, Michael Mischkot, David Bue Pedersen, Matteo Calaon, Hans Nørgaard Hansen

28.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

The asymmetric game of production technology in a manufacturing supply chain network: the influence of number of manufacturing partners

Zhendong Li, Huiying Zhang, Ke Jiang, Mitchell Mainstone

28.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of prestress on cutting of nickel-based superalloy GH4169

Ruitao Peng, Kaifa Liu, Xinzi Tang, Miao Liao, Yonglin Hu

29.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Materials and micro drilling of high frequency and high speed printed circuit board: a review

Hongyan Shi, Xianwen Liu, Yan Lou

29.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Sustainable turning using multi-objective optimization: a study of Al 6061 T6 at high cutting speeds

Salman Sagheer Warsi, Mujtaba Hassan Agha, Riaz Ahmad, Syed Husain Imran Jaffery, Mushtaq Khan

29.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Cathode tool design and experimental study on electrochemical trepanning of blades

Zhouzhi Gu, Weiguo Zhu, Xiaohu Zheng, Xiaomin Bai

29.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

New color from multilayer coating applied machining tools based on tungsten carbide insert

J. C. Caicedo

29.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Investigation on thermal relaxation of residual stresses induced in deep cold rolling of Ti–6Al–4V alloy

Armin Hadadian, Ramin Sedaghati

30.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Study of 3D parameters and residual stress in grinding of AISI 4340 steel hardened using different cutting fluids

Leonardo Roberto da Silva, Davi Alves da Silva, Francisco Vieira dos Santos, Fernando Júnio Duarte

30.09.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Machine chattering identification based on the fractional-order chaotic synchronization dynamic error

Chao-Kuang Chen, Yu-Chung Li

01.10.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Influence of Al2O3 addition on the hardness and in vitro corrosion behavior of laser synthesized Ti-Al2O3 coatings on Ti-6Al-4V

A. Mthisi, A. P. I. Popoola

01.10.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A non-associated anisotropic plasticity model with mixed isotropic–kinematic hardening for finite element simulation of incremental sheet metal forming process

Abir Bouhamed, Hanen Jrad, Lotfi Ben Said, Mondher Wali, Fakhreddine Dammak

01.10.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Research on detection of the linkage performance for five-axis CNC machine tools based on RTCP trajectories combination

Zhong Jiang, Jiexiong Ding, Jing Zhang, Qichen Ding, Qingzhao Li, Li Du, Wei Wang

01.10.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Investigation on cutting mechanism of SiCp/Al composites in precision turning

Yefu Wang, Wenhe Liao, Kai Yang, Wanqun Chen, Tingting Liu

01.10.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Study on high-efficiency cutting of high-thickness workpiece with stranded wire electrode in high-speed wire electrical discharge machining

Yichao Ji, Zhidong Liu, Cong Deng, Laijiu Fang, Mingbo Qiu

01.10.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Influence of minimum quantity lubrication on surface integrity of ground hardened H13 hot die steel

A. S. Awale, A. Srivastava, M. Vashista, M. Z. Khan Yusufzai

02.10.2018 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Higher cellular interaction and faster production of natural rubber latex LbL films by spraying method

Christiane Pinto Davi, Christiane Bertachini Lombello, Mariselma Ferreira

21.09.2018 | Correction | Ausgabe 1-4/2019

Correction to: Research on formability in multi-point forming with different elastic pads

Qu Erhu, Li Mingzhe, Li Rui, Cui Mingyang, Lin Jianlei

01.10.2018 | Correction | Ausgabe 1-4/2019

Correction to: Force prediction models for helical end milling of nickel-aluminium bronze

Ruihu Zhou, Wenyu Yang, Kun Yang

01.10.2018 | Correction | Ausgabe 1-4/2019

Correction to: Analytical modeling of residual stress in helical end milling of nickel-aluminum bronze

Ruihu Zhou, Wenyu Yang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise