Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2019

Ausgabe 1-4/2019

Inhaltsverzeichnis ( 124 Artikel )

11.02.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Specific cutting energy index (SCEI)-based process signature for high-performance milling of hardened steel

Zerun Zhu, Fangyu Peng, Xiaowei Tang, Rong Yan, Zepeng Li, Chen Chen, Hao Sun

13.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Recast layer mechanical properties of tool steel after electrical discharge machining with silicon powder in the dielectric

Cezar Augusto Oleinik Luzia, Carlos Augusto Henning Laurindo, Paulo César Soares Jr, Ricardo Diego Torres, Luciano Antonio Mendes, Fred Lacerda Amorim

13.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Deposition of ferromagnetic particles using a magnetic assisted cold spray process

Antonello Astarita, Giovanni Ausanio, Luca Boccarusso, Umberto Prisco, Antonio Viscusi

13.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Wear mechanisms of cutting tools in high-speed turning of Ti6Al4V alloy

Leonardo Roberto da Silva, Odilon Soares da Silva, Francisco Vieira dos Santos, Fernando Júnio Duarte, Gustavo Valadares Veloso

13.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Sample position inside abrasive fluidized bed to obtain morphology uniformity

F. Pietrobono, G. Rubino, V. Tagliaferri, F. Trovalusci

14.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Numerical optimization of variable blank holder force trajectory and blank shape for twist springback reduction using sequential approximate optimization

Satoshi Kitayama, Ryoto Ishizuki, Masaki Yokoyaka, Kiichiro Kawamoto, Shinji Natsume, Kazuaki Adachi, Takahiro Noguchi, Toshio Ohtani

15.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Adaptive speed control for waterjet milling in pocket corners

Van Hung Bui, Patrick Gilles, Tarek Sultan, Guillaume Cohen, Walter Rubio

15.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Modeling machining errors for thin-walled parts according to chip thickness

Caixu Yue, Zhitao Chen, Steven Y. Liang, Haining Gao, Xianli Liu

15.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Specific cutting energy: a physical measurement for representing tool wear

Antoine Proteau, Antoine Tahan, Marc Thomas

16.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Robust fixture design of compliant assembly process based on a support vector regression model

Kuigang Yu

16.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Simulation study integrated with activity-based costing for an electronic device re-manufacturing system

Kevin Calvi, Farouq Halawa, Manthos Economou, Rohan Kulkarni, Sung Hoon Chung

16.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Comparative study on drilling effect between conventional drilling and ultrasonic-assisted drilling of Ti-6Al-4V/Al2024-T351 laminated material

Lei Wei, Dazhong Wang

16.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A new monitoring scheme of an air quality network based on the kernel method

Maroua Said, Khaoula ben Abdellafou, Okba Taouali, Mohamed Faouzi Harkat

16.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Prediction model, simulation, and experimental validation on thrust force and torque in drilling SiCp/Al6063

Teng Dou, Hongge Fu, Zhonglei Li, Xu Ji, ShanShan Bi

18.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Optimization of microridge punch design for deep drawing process by using the fuzzy Taguchi method

Chun-Chih Kuo, Bor-Tsuen Lin, Wen-Ting Wang

18.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Temperature measurement in the ultrasonic-assisted drilling process

M. A. Moghaddas, A. Y. Yi, K. F. Graff

18.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Numerical study on action of HMF, PMF, DHMF, and DPMF on molten metal during electromagnetic casting

Yonghui Jia, Xingrui Chen, Qichi Le, Hang Wang, Weitao Jia

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A numerical-experimental evaluation of the fatigue strain limits of CFRP subjected to dynamic compression loads

Angelo de Souza, Guilherme Ferreira Gomes, Eric Peres Peres, José Cláudio Isaías, Antonio Carlos Ancelotti Jr

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Characterization of copper–nickel alloys fabricated using laser metal deposition and blended powder feedstocks

Sreekar Karnati, Frank F. Liou, Joseph W. Newkirk

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Optimal calibration strategy for a five-axis machine tool accuracy improvement using the D-optimal approach

N. Alami Mchichi, J. R. R. Mayer

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Kinematic view of cutting mechanism in hole-making process of longitude-torsional ultrasonic assisted helical milling

Yunhe Zou, Guang Chen, Lianpeng Lu, Xuda Qin, Chengzu Ren

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Study on the mechanism of chip forming and the microhardness of micro-grinding nickel-based single-crystal superalloy

Yunguang Zhou, Lianjie Ma, Yadong Gong, Li Zhang, Guoqiang Yin, Yao Sun

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Real-time chatter detection and automatic suppression for intelligent spindles based on wavelet packet energy entropy and local outlier factor algorithm

Yung-Chen Yao, Yu-Hsuan Chen, Chien-Hao Liu, Wen-Pin Shih

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effects of air on metallic sheet deformation by electromagnetic forming

Ning Liu, Zhipeng Lai, Quanliang Cao, Xiaotao Han, Yujie Huang, Xiaoxiang Li, Meng Chen, Liang Li

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Optimization of fixture flexibility for irregular geometries of workpiece based on metamorphic mechanisms

Zhouxiang Jiang, Xiaoqi Tang

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Investment casting of titanium alloys with calcium zirconate moulds and crucibles

Ulrich E. Klotz, C. Legner, F. Bulling, L. Freitag, C. Faßauer, S. Schafföner, C. G. Aneziris

19.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Methods to reduce variation in cutting tool life tests

Linus Meier

20.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Impact of a process interruption on tensile properties of SS 316L parts and hybrid parts produced with selective laser melting

Philipp Stoll, Adriaan Spierings, Konrad Wegener

20.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effects of temperature, initial conditions, and roller path on hot spinnability of AZ31 alloy

Mohammad Sadegh Mohebbi, Mostafa Rahimi pour

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Comparative analysis of component design problems for integrated hydraulic transformers

Wei Shen, Hamid Reza Karimi, Ruihan Zhao

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology

Marwa Haj Ibrahim, Ali Aidibe, Mohamed Ali Mahjoub, Antoine Tahan, Borhen Louhichi

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Influence of laser spot scanning speed on micro-polishing of metallic surface using UV nanosecond pulse laser

Pong-Ryol Jang, Chun-Gun Kim, Gwang-Pok Han, Myong-Chol Ko, Un-Chol Kim, Hye-Sung Kim

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of ultrasonic vibration on ultra-precision diamond turning of Ti6Al4V

Lei Pei, Hongbing Wu

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019 Open Access

Powder interlayer bonding of titanium alloys: Ti-6Al-2Sn-4Zr-6Mo and Ti-6Al-4V

P. Davies, A. Johal, H. Davies, S. Marchisio

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental study on correlation between turning temperature rise and turning vibration in dry turning on aluminum alloy

Qiu Yu, Shuncai Li, Xin Zhang, Minghui Shao

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental investigations and kinematic simulation of single grit scratched surfaces considering pile-up behaviour: grinding perspective

Dinesh Setti, Benjamin Kirsch, Jan C. Aurich

21.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Contribution for minimization the usage of cutting fluids in CFRP grinding

Rafael Lemes Rodriguez, José Claudio Lopes, Sandro Donnini Mancini, Luiz Eduardo de Ângelo Sanchez, Francisco Mateus Faria de Almeida Varasquim, Roberta Silveira Volpato, Hamilton José de Mello, Paulo Roberto de Aguiar, Eduardo Carlos Bianchi

22.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A deep learning approach for anomaly detection based on SAE and LSTM in mechanical equipment

Zhe Li, Jingyue Li, Yi Wang, Kesheng Wang

22.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effects of lubrication and strain path on constrained groove pressing of commercially pure aluminum sheets

Zongshen Wang, Tao Wang, Yanjin Guan, Xiuting Wei, Xiaoying Fang, Guangming Zhu, Shan Gao

22.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Ergonomics-based working flexibility for automated guided vehicle (AGV) operators

S. Mohsin, I. A. Khan, M. Ali

22.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of viscoplasticity on microfluidic cavity filling efficiency of a thermoplastic polymer in hot-embossing process

Gang Cheng, Thierry Barriere

23.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Contour error–bounded parametric interpolator with minimum feedrate fluctuation for five-axis CNC machine tools

Mansen Chen, Yuwen Sun

23.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental study on shear thickening polishing of cemented carbide insert with complex shape

B. H. Lyu, Q. K. He, S. H. Chen, Q. Shao, Y. Chen, Z. Y. Geng

23.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Research on the method of stacked cutting of abrasive water jet

Xiaojin Miao, Meiping Wu, Lei Song, Feng Ye, Zhengrong Qiang

23.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental study on surface integrity in cryogenic milling of 35CrMnSiA high-strength steel

Le Gong, Wei Zhao, Fei Ren, Ning He, Liang Li, Qing Xu, Aqib Mashood Khan

23.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Numerical research on erosion involved in ultrasonic-assisted abrasive waterjet machining

Zhe Lv, Rongguo Hou, Xuesong Chen, Chuanzhen Huang

23.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A study on material removal mechanism of ultramicro-grinding (UMG) considering tool parallel run-out and deflection

Jun Wu, Jun Cheng, Yadong Gong

23.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Tribological behaviour of laser synthesized Ti-Al2O3 coatings on Ti-6Al-4V alloy

A. Mthisi, A. P. I. Popoola, O. M. Popoola

25.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Intelligent design and group assembly of male and female dies for hole piercing of automotive stamping dies

Gui Li, Peng Yang, Zhongkai Liang, Saisai Cui

25.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Development and application of a large injection mold with conformal cooling channels

Chil-Chyuan Kuo, Yi-Jun Zhu, Ying-Zhi Wu, Zheng-Yan You

25.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

An overall framework and subsystems for smart manufacturing integrated system (SMIS) from multi-layers based on multi-perspectives

Xianyu Zhang, Xinguo Ming, Zhiwen Liu, Yuanju Qu, Dao Yin

25.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Investigation of process parameters for stable micro dry wire electrical discharge machining

Asfana Banu, Mohammad Yeakub Ali, Mohamed Abdul Rahman, Mohamed Konneh

25.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of solution conductivity on tool electrode wear in electrochemical discharge drilling of nickel-based alloy

Chenxiang Zhang, Zhengyang Xu, Yusen Hang, Jun Xing

25.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experiment on cutting performance of textured cemented carbide tools with various wettability levels

Xiuqing Hao, Hanlong Li, Yinfei Yang, Sinong Xiao, Xiaolu Song, Liang Li

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A dual-mesh method for efficient thermal stress analysis of large-scale welded structures

Hui Huang, Ninshu Ma, Hidekazu Murakawa, Zhili Feng

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Laser cutting path optimization using simulated annealing with an adaptive large neighborhood search

Makbul Hajad, Viboon Tangwarodomnukun, Chorkaew Jaturanonda, Chaiya Dumkum

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental validation of chip production rate as a tool wear identification in micro-endmilling

Jue-Hyun Lee, Angela A. Sodemann, Anuj K. Bajaj

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Numerical and experimental investigations of the hot stamping process for complex aircraft skin parts composed of TA32 high-temperature titanium alloy using an Arrhenius-type constitutive model

Can Chen, Minghe Chen, Lansheng Xie, Zonghui Gong, Jianhua Ye

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Experimental and simulation studies of abrasive particles impacting monocrystalline silicon in suspension thin film flow field of ultrasonic polishing

Tianqi Zhang, Tianbiao Yu, Tao Yang, Zixuan Wang, Ji Zhao

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Compensation method for profile deviations caused by the complex shape of electrodes in orbital electrical discharge machining

Jie-Shing Lo, Chang-Tai Jiang

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Correcting shape error on external corners caused by the cut-in/cut-out process in abrasive water jet cutting

Ming Chen, Shijin Zhang, Jiyue Zeng, Binghai Chen, Jieze Xue, Lidanyang Ji

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Human Factor Analyser for work measurement of manual manufacturing and assembly processes

Maurizio Faccio, Emilio Ferrari, Mauro Gamberi, Francesco Pilati

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Atomistic simulation of diffusion bonding of dissimilar materials undergoing ultrasonic welding

Avik Samanta, Shaoping Xiao, Ninggang Shen, Jingjing Li, Hongtao Ding

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A pre-design method for drilled cooling pipes in hot stamping tool based on pipe parameter window

Long Chen, Wei Chen, Fan Xu, Yinxia Zhu, Yitao Zhu

26.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Forming limit diagrams for tubes with non-uniform thickness in hydro-bulging

Lianfa Yang, Qiwen Zhao

27.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Role of welding speed on keyhole-induced porosity formation based on experimental and numerical study in fiber laser welding of Al alloy

Lijin Huang, Xueming Hua, Dongsheng Wu, Youxiong Ye

27.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Predicting the dynamics of thin-walled parts with curved surfaces in milling based on FEM and Taylor series

Dazhen Wang, Junxue Ren, Weijun Tian, Kaining Shi, Baogang Zhang

27.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Mechanical and tribological assessments of high-vanadium high-speed steel by the conventional powder metallurgy process

Shanhong Wan, Huan Li, Kiet Tieu, Qi Xue, Hongtao Zhu

28.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Solidification prediction of laser cladding 316L by the finite element simulation

Pengzhao Ma, Yu Wu, Pengju Zhang, Jingqing Chen

28.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Evaluation of tool life and workpiece surface roughness in turning of AISI D6 hardened steel using PCBN tools and minimum quantity of lubricant (MQL) applied at different directions

Miguel Mandú Bonfá, Éder Silva Costa, Wisley Falco Sales, Fred Lacerda Amorim, Luis Henrique Andrade Maia, Álisson Rocha Machado

28.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019 Open Access

Experimental determination of the viscoelastic parameters of K-BKZ model and the influence of temperature field on the thickness distribution of ABS thermoforming

Jemyung Cha, Moonjeong Kim, Dongguen Park, Jeung Sang Go

28.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Software analyses of optimum toolpath strategies from computer numerical control (CNC) codes

Isuamfon F. Edem, Vincent A. Balogun, Bassey D. Nkanang, Paul T. Mativenga

28.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Influence of the heat deformation of ultra-precision fly cutting tools on KDP crystal surface microstructure

Pengqiang Fu, Junqi Xue, Lijie Zhou, Yiwen Wang, Zhikun Lan, Lan Zhan, Feihu Zhang

28.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Sawing stress of SiC single crystal with void defect in diamond wire saw slicing

Yufei Gao, Yang Chen

28.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

An irredundant G01 tool path generation method for five-axis machining considering tool tip and orientation errors

Jiang Han, Xiuyu Liu, Yang Jiang, Lian Xia, Lei Lu

29.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Research on grind-hardening layer and residual stresses based on variable grinding forces

Xiangming Huang, Yinghui Ren, Wei Wu, Tong Li

30.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Modeling of texture development in additive manufacturing of Ni-based superalloys

Ali Tabei, Elham Mirkoohi, Hamid Garmestani, Steven Liang

30.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Chatter stability in ultra-precision fly cutting considering tool wear effect

Kai Li, Songping He, Bo Luo, Bin Li, Hongqi Liu

30.03.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Surface integrity in grinding of C-250 maraging steel with resin-bonded and electroplated CBN grinding wheels

Shouguo Shen, Beizhi Li, Weicheng Guo

01.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Rotary ultrasonic machining of carbon fiber reinforced plastic composites: a study on fiber material removal mechanism through single-grain scratching

Fuda Ning, Hui Wang, Weilong Cong

01.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Path calculation of 7-axes synchronous quasi-tangential laser manufacturing

Norbert Ackerl, Maximilian Warhanek, Johannes Gysel, Konrad Wegener

09.05.2019 | Correction | Ausgabe 1-4/2019

Correction to: Path calculation of 7-axes synchronous quasi-tangential laser manufacturing

Norbert Ackerl, Maximilian Warhanek, Johannes Gysel, Konrad Wegener

01.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Study on surface quality and tool life in ultrasonic vibration countersinking of titanium alloys (Ti6Al4V)

Zhe Li, Hongjun Guo, Lanzhu Li, Deyuan Zhang, Xinggang Jiang

02.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Optimization of 3D IC stacking chip on molded encapsulation process: a response surface methodology approach

M. H. H. Ishak, Farzad Ismail, M. S. Abdul Aziz, M. Z. Abdullah, Aizat Abas

02.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Research on modal analysis method of CNC machine tool based on operational impact excitation

Bin Li, Liangjie Li, Huanbin He, Xinyong Mao, Xuchu Jiang, Yili Peng

02.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

The cooling rate dependence of the specific volume in amorphous plastic injection molding

Kristjan Krebelj, Miroslav Halilovič, Nikolaj Mole

02.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Analytical evaluation of defect generation for selective laser melting of metals

Patcharapit Promoppatum, Shi-Chune Yao

02.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Electric hot incremental sheet forming of Ti-6Al-4V titanium, AA6061 aluminum, and DC01 steel sheets

Mostafa Vahdani, Mohammad Javad Mirnia, Mohammad Bakhshi-Jooybari, Hamid Gorji

03.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Data-driven smart production line and its common factors

Yongping Zhang, Ying Cheng, Xi Vincent Wang, Ray Y. Zhong, Yingfeng Zhang, Fei Tao

03.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Recent progress and challenges with 3D printing of patterned hydrophobic and superhydrophobic surfaces

Reza Jafari, Come Cloutier, Anahaita Allahdini, Gelareh Momen

03.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019 Open Access

Industrial robotic machining: a review

Wei Ji, Lihui Wang

03.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Finite element analysis of thermomechanical behavior and residual stresses in cold flowformed Ti6Al4V alloy

Abhishek Kumar Singh, K. Narasimhan, Ramesh Singh

03.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Optimization of hard turning process parameters using the response surface methodology and finite element simulations

S. Arfaoui, F. Zemzemi, M. Dakhli, Z. Tourki

03.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Advanced process strategy to realize microducts free of powder using selective electron beam melting

Christoph R. Pobel, Sabrina Reichel, Zongwen Fu, Fuad Osmanlic, Carolin Körner

03.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Joining phenomena and tensile strength of joint between Ni-based superalloy and heat-resistant steel by friction welding

M Kimura, K Nakashima, M Kusaka, K Kaizu, Y Nakatani, M Takahashi

04.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Tensile property and micro-texture evolution of the charge weld in a billet-to-billet extrusion of AA6061 aluminum profile

Shumei Lou, Anning Wang, Shuai Lu, Guangxin Guo, Chuandong Qu, Chunjian Su

04.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Kinematics optimization of the polishing process of large-sized ceramic slabs

Ivo Campione, Cristiano Fragassa, Alberto Martini

04.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Material removal mechanisms in chemical-magnetorheological compound finishing

Huazhuo Liang, Qiusheng Yan, Jiabin Lu, Bin Luo, Xiaolan Xiao

04.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Fabrication of PCD micro end mill for machining hard and brittle material

Xian Wu, Liang Li, Ning He, Guolong Zhao, Feng Jiang

04.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Modeling the Tennessee Eastman chemical process reactor using bio-inspired feedforward neural network (BI-FF-NN)

Alaa Sheta, Malik Braik, Heba Al-Hiary

04.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A fiducial-aided data fusion method for the measurement of multiscale complex surfaces

Shixiang Wang, Chi Fai Cheung, Mingyu Liu

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Acoustic emission signal of fiber-reinforced composite grinding: frequency components and damage pattern recognition

Jinhua Wei, Haoji Wang, Bin Lin, Tianyi Sui, Feifei Zhao, Sheng Fang

14.05.2019 | Correction | Ausgabe 1-4/2019

Correction to: Acoustic emission signal of fiber-reinforced composite grinding: frequency components and damage pattern recognition

Jinhua Wei, Haoji Wang, Bin Lin, Tianyi Sui, Feifei Zhao, Sheng Fang

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

A flexible sheet-bulk forming demonstrator

João P. Magrinho, Maria B. Silva, Paulo A.F. Martins

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Analysis and constitutive modelling of high strain rate deformation behaviour of wire–arc additive-manufactured ATI 718Plus superalloy

G. Asala, J. Andersson, O. A. Ojo

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Research on flexible rolling process of three-dimensional surface part using auxiliary rolls

Kai Liu, Wenzhi Fu, Mingzhe Li, Yi Li, Zhuo Yi

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Surface and microstructure characterization of low-frequency vibration-assisted drilling of Ti6Al4V

R. Hussein, A. Sadek, M. A. Elbestawi, M. H. Attia

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Investigation of redistribution mechanism of residual stress during multi-process milling of thin-walled parts

Miaoxian Guo, Xiaohui Jiang, Yi Ye, Zishan Ding, Zhenya Zhang

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effects of cooling and lubrication conditions on tool wear in turning of Al/SiCp composite

Chunzheng Duan, Wei Sun, Mingfan Che, Wendian Yin

05.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effects of graphene oxide nanofluids on cutting temperature and force in machining Ti-6Al-4V

Shuang Yi, Nan Li, Sachin Solanki, John Mo, Songlin Ding

06.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Influence of laser processing parameters on porosity in Inconel 718 during additive manufacturing

Pankaj Kumar, Jano Farah, Javed Akram, Chong Teng, Jon Ginn, Mano Misra

06.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes

C. Hodonou, M. Balazinski, M. Brochu, C. Mascle

06.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Milling force monitoring with thin-film sensors integrated into fixtures

Dongsheng Liu, Yuan Hu, Dinghua Zhang, Huan Luo

06.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Measurement of high flexibility components in composite material: critical issues and possible solutions

Wilma Polini, Andrea Corrado, Luca Sorrentino, Domenico Speranza

06.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Augmented reality system to guide operators in the setup of die cutters

Hugo Álvarez, Igor Lajas, Andoni Larrañaga, Luis Amozarrain, Iñigo Barandiaran

07.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

The effect of coil polarity on electromagnetic forming using a multi-coil system

Zhipeng Lai, Quanliang Cao, Meng Chen, Ning Liu, Xiaoxiang Li, Yujie Huang, Xiaotao Han, Liang Li

07.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of CBN grain friability in hardened steel plunge grinding

José Claudio Lopes, Lucas de Martini Fernandes, Bruno Biondo Domingues, Rubens Chinali Canarim, Maria da Penha Cindra Fonseca, Luiz Eduardo de Angelo Sanchez, Rodolfo Fischer Moreira de Oliveira, Hamilton José de Mello, Paulo Roberto Aguiar, Eduardo Carlos Bianchi

08.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Study on laser-induced oxidation assisted micro milling of Ti6Al4V alloy

Hongjun Xia, Guolong Zhao, Jihao Yan, Liang Li, Ning He, Xiuqing Hao

09.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of welding parameters on functionality of dissimilar laser-welded NiTi superelastic (SE) to shape memory effect (SME) wires

Mehrshad Mehrpouya, Annamaria Gisario, Giovanni Battista Broggiato, Michela Puopolo, Silvia Vesco, Massimiliano Barletta

09.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Performance evaluation of vegetable-based cutting fluids in turning of AISI 1050 steel

Déborah Oliveira Almeida Carvalho, Leonardo Rosa Ribeiro da Silva, Luciane Sopchenski, Mark James Jackson, Álisson Rocha Machado

27.04.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Structure design and effects of conical gear roller on restraining rabbit ear defects during gear rolling

Tao Wu, Guangchun Wang, Jin Li, Ke Yan

14.05.2019 | ORIGINAL ARTICLE | Ausgabe 1-4/2019

Effect of high-frequency micro-vibration on microstructure and properties of laser cladding aluminum coatings

Chonggui Li, Shuai Li, Ming Zeng, Shuai Sun, Feifei Wang, You Wang

17.05.2019 | Correction | Ausgabe 1-4/2019

Correction to: Feature shape complexity: a new criterion for the simplification of feature-based 3D CAD models

Soonjo Kwon, Duhwan Mun, Byung Chul Kim, Soonhung Han

17.05.2019 | Correction | Ausgabe 1-4/2019

Correction to: Grinding burn on hardened steel: characterization of onset mechanisms by design of experiments

F. Del Re, M. Dix, F. Tagliaferri

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise