Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-2/2021

Ausgabe 1-2/2021

Inhaltsverzeichnis ( 40 Artikel )

10.03.2021 | Critical Review | Ausgabe 1-2/2021

Progress on single-point incremental forming of polymers

Malik Hassan, G. Hussain, Hongyu Wei, Abdul Qadeer, Mohammed AlKahtani

19.03.2021 | Critical Review | Ausgabe 1-2/2021

Recent development of ultrasonic brazing

Yuxiang Li, Chao Chen, Ruixiang Yi

19.03.2021 | Critical Review | Ausgabe 1-2/2021 Open Access

Powder-based laser hybrid additive manufacturing of metals: a review

Amaia Jiménez, Prveen Bidare, Hany Hassanin, Faris Tarlochan, Stefan Dimov, Khamis Essa

08.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

An analytical model for micro-cutting considering the cutting tool edge radius effect and material separation

Yiquan Li, Zhanjiang Yu, Jinkai Xu, Xiaozhou Li, Huadong Yu

08.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021 Open Access

Dynamic conformal cooling improves injection molding

Hybrid molds manufactured by laser powder bed fusion
Andreas Kirchheim, Yogeshkumar Katrodiya, Livia Zumofen, Frank Ehrig, Curdin Wick

08.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021 Open Access

Study of the effect of inter-pass temperature on weld overlap start-stop defects and mitigation by application of laser defocusing

Wai Jun Lai, Supriyo Ganguly, Wojciech Suder

09.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Numerical prediction of machining-induced surface residual stress for TC4 cryogenic turning

Haibo Liu, Chengxin Wang, Zhaohuan Liu, Kuo Liu, Shaowei Jiang, Yongqing Wang

09.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Intelligent prognostics of bearings based on bidirectional long short-term memory and wavelet packet decomposition

Houssem Habbouche, Tarak Benkedjouh, Noureddine Zerhouni

10.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021 Open Access

The impact of tool point angle and interlayer gap width on interface borehole quality in drilling CFRP/titanium stacks

Andrea Pardo, Julie Le Gall, Robert Heinemann, Luke Bagshaw

10.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Laser-induced oxidation-assisted micromilling of deep narrow microgroove on Inconel 718

Lianjia Xin, Bin Zhang, Guolong Zhao, Hanliang Liu, Yinfei Yang, Liang Li

10.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Demonstration and evaluation of a digital twin-based virtual factory

Emre Yildiz, Charles Møller, Arne Bilberg

10.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Evaluation of stretch flangeability of dual-phase steels by hole expansion test

Venkatesh Balisetty, Uday Chakkingal, Srinivasan Venugopal

10.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Numerical simulation of magnetic pulse radial compaction of W-Cu20 powder with a field shaper

Fenqiang Li, Hui Li, Xiaohong Ge, Jun Zhao, Huawei Wu, Jia Lin, Guimei Huang

10.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Use of smartphones as optical metrology tools for surface wear detection

Eleftheria Diamanti, Eneko Iriarte, Eva Oblak, Santiago Dominguez-Meister, Iñigo Ibañez, Iñigo Braceras, Andreas Berger

11.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Fabrication of silver microstructures via electrohydrodynamic inkjet printing as customizable X-ray marker in bio-structure for biomedical diagnostic imaging

Xiao Zhang, Xuepeng Jiang, Zhan Zhang, Hantang Qin

11.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Precise seam tracking in robotic welding by an improved image processing approach

Nahid Banafian, Rasul Fesharakifard, Mohammad Bagher Menhaj

11.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Surface characteristics of laser polished Ti-6Al-4V parts produced by electron beam melting additive manufacturing process

Safak Nesli, Oguzhan Yilmaz

12.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Real-time monitoring and control for high-efficiency autonomous laser fabrication of silicon nanoparticle colloids

Brian Freeland, Ronan McCann, Paul O’Neill, Sithara Sreenilayam, Manuel Tiefenthaler, Michal Dabros, Mandy Juillerat, Greg Foley, Dermot Brabazon

12.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021 Open Access

Laser-based powder bed fusion of niobium with different build-up rates

Tjorben Griemsmann, Arvid Abel, Christian Hoff, Jörg Hermsdorf, Markus Weinmann, Stefan Kaierle

12.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021 Open Access

Comparison of geometrical accuracy of active devices for 3D orthopaedic reconstructions

Davide Felice Redaelli, Sara Gonizzi Barsanti, Emilia Biffi, Fabio Alexander Storm, Giorgio Colombo

13.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Printability study of self-supporting graphene oxide-laponite nanocomposites for 3D printing applications

Manish Sakhakarmy, Siyu Tian, Lily Raymond, Guoping Xiong, Jihua Chen, Yifei Jin

14.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Brass/Invar bimetal by explosive welding

Andrey Malakhov, Ivan Saikov, Igor Denisov

15.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Formability and microstructure of TC4 titanium alloy hollow shafts formed by cross-wedge rolling with a mandrel

Pengni Feng, Cuiping Yang, Baoyu Wang, Junling Li, Jinxia Shen, Xiaoming Yang

15.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites

Emine Şap, Usame Ali Usca, Munish Kumar Gupta, Mustafa Kuntoğlu

15.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Mechanical and tribological properties of porous metallic CBN composites reinforced by graphene nanoparticles

Guodong Xiao, Biao Zhao, Wenfeng Ding

15.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Research on rolling process of bow parts with variable lateral roll spacing based on optimal bending angle distribution function

Chunjian Su, Zhen Li, Hongxi Yang, Shumei Lou, Yuting Lv, Guosong Zhang, Rui Wang

16.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Multi-objective optimization of process parameters in plastic injection molding using a differential sensitivity fusion method

Huifang Zhou, Shuyou Zhang, Zili Wang

16.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Assessment of the reduction of fiber-matrix debonding in fiber-reinforced composite edge tool machining using water jets

Igor A. Shchurov, Alexander V. Nikonov

17.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Realization and performance evaluation of a machine tool vibration monitoring module by multiple MEMS accelerometer integrations

Jui-Min Tsai, I-Chun Sun, Kuo-Shen Chen

17.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Optimisation of the wear resistance properties of laser cladded T-800 coatings

Kinsman Malikongwa, Monnamme Tlotleng, Eyitayo Olatunde Olakanmi

17.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021 Open Access

Internal face finishing for a cooling channel using a fluid containing free abrasive grains

Mitsugu Yamaguchi, Tatsuaki Furumoto, Shuuji Inagaki, Masao Tsuji, Yoshiki Ochiai, Yohei Hashimoto, Tomohiro Koyano, Akira Hosokawa

17.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Hydrodynamic action in slicing PV polysilicon with a novel fixed and free abrasive combined wire sawing

Tianzhao Pu, Yufei Gao, Youkang Yin, Liyuan Wang

17.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Impact of wear parameters on NiCr-WC10Co4Cr and WC10Co4Cr HVOF sprayed composite coatings using response surface methodology

Azzeddine Mazouzi, Amine Rezzoug, Billel Cheniti, Seif El Islam Lebouachera, Djamel Miroud, Aniss-Rabah Boukantar, Nadjib Drouiche, Boubekeur Djerdjare

18.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Energy saving design of the spindle of CNC lathe by structural optimization

Yan Lv, Congbo Li, Yan Jin, Jixiang He, Juan Li

18.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Active vibration control of thin-walled milling based on ANFIS parameter optimization

Xiaojuan Wang, Qinghua Song, Munish Kumar Gupta, Zhanqiang Liu

18.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

A comparative study on the evolutions of thermal and mechanical parameters and microstructure of 30Si2MnCrMoVE steel during hot ACDR and upsetting deformation

Hai Wang, Dong Liu, Fuxiang Zhang, Zhe Zhang, Jianguo Wang, Yanhui Yang

19.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

The heat flow coupling effect of laser-assisted magnetorheological polishing

Zhengyan Zhang, Kang Geng, Guochao Qiao, Jianhua Zhang

19.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Cooperative optimization of cutting parameters, process routes, and scheduling considering carbon emissions with analytic target cascading

Changle Tian, Guanghui Zhou, Fengyi Lu, Zhenghao Chen, Liang Zou

19.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Role of the mandrel in the variable curvature local-induction-heating bending process of B1500HS thin-walled rectangular tubes

Tingjun Cai, Chengxi Lei, Wenyu Yang, Hongya Fu, Zhongwen Xing

20.03.2021 | ORIGINAL ARTICLE | Ausgabe 1-2/2021

Defect-free high-feed milling of Ti-6Al-4V alloy via a combination of cutting and wiper inserts

Sana Ehsan, Sarmad Ali Khan, Mudassar Rehman

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise