Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2015

Ausgabe 1-4/2015

Micromanufacturing (pp 1-254)

Inhaltsverzeichnis ( 60 Artikel )

01.01.2015 | Editorial | Ausgabe 1-4/2015

Editorial by V. K. Jain, I.I.T. Kanpur (India) for the special issue on “Micromanufacturing”

Vijay Kumar Jain

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Enhancing the biocompatibility of Ti6Al4V implants by laser surface microtexturing: an in vitro study

S. Mukherjee, S. Dhara, P. Saha

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Investigation and analysis on pulsed Nd:YAG laser micro-turning process of aluminium oxide (Al2O3) ceramic at various laser defocusing conditions

G. Kibria, B. Doloi, B. Bhattacharyya

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

An experimental investigation on fabricated TW-ECSM setup during micro slicing of nonconductive ceramic

Alakesh Manna, Amandeep Kundal

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Generation of microfeatures on stainless steel by electrochemical micromachining

B. Ghoshal, B. Bhattacharyya

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Influence of electrochemical micromachining parameters during generation of microgrooves

V. Rathod, B. Doloi, B. Bhattacharyya

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Micromanufacturing by selective jet electrodeposition process

Mridul S. Rajput, Pulak M. Pandey, Sunil Jha

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Experimental analysis of electro-discharge deposition process

B. Muralidharan, H. Chelladurai

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Numerical simulation of micro-EDM model with multi-spark

K. P. Somashekhar, S. Panda, J. Mathew, N. Ramachandran

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Multiresponse optimization of micro-wire electrical discharge machining process

B. Kuriachen, K. P. Somashekhar, Jose Mathew

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM)

Harmesh Kumar

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Investigation on shape, size, surface quality and elemental characterization of high-aspect-ratio blind micro holes in die sinking micro EDM

S. Barman, Naga Hanumaiah, A. B. Puri

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining process

H. K. Dave, V. J. Mathai, K. P. Desai, H. K. Raval

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Analysis of micro-electrical discharge drilling characteristics in a thin plate of Ti–6Al–4 V

Koustov Mondol, M. S. Azad, A. B. Puri

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Study on the influence of micro-EDM process parameters during machining of Ti–6Al–4V superalloy

A. P. Tiwary, B. B. Pradhan, B. Bhattacharyya

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Micro-grinding characteristics of polycrystalline diamond tool

Ramesh Kuppuswamy, Kerry-Anne Airey, Habib Sardikmen

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

A 2D CFD simulation of MR polishing medium in magnetic field-assisted finishing process using electromagnet

Manas Das, V. K. Jain, P. S. Ghoshdastidar

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

A model for deformation in high energy rate micro forming process

S. R. Sondur, S. V. Pawar, S. A. Salunke, S. R. Salunke, S. B. Patil

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Tool deflection model for micromilling processes

P. Rodríguez, J. E. Labarga

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Analysis of tool deflection in micro milling of graphite electrodes

Goran Mijušković, Peter Krajnik, Janez Kopač

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes

Elisa Vázquez, Jéssica Gomar, Joaquim Ciurana, Ciro A. Rodríguez

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Dynamic design methodology of high speed micro-spindles for micro/meso-scale machine tools

Guanghui Zhang, Kornel F. Ehmann

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Fabrication of 3D random microlens array composite optical film with self-assembly

Quang-Cherng Hsu, Yu-Liang Chen

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Investigation of the effect of tool geometry on friction stir welding of 5083-O aluminum alloy

S. Amini, M. R. Amiri, A. Barani

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

The performance of pressure assisted casting process to improve the mechanical properties of Al-Si-Mg alloys matrix reinforced with coated B4C particles

Ali Mazahery, Mohsen Ostad Shabani

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Composite error prediction of multistage machining processes based on error transfer mechanism

Genbao Zhang, Yan Ran, Yang Wang, Tian Gao

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

A computer vision-based assistant system for the assembly of narrow cabin products

Yi Liu, ShiQi Li, JunFeng Wang, Hongmei Zeng, JiPing Lu

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Solving continuous single-objective defensive location problem based on hybrid directed tabu search algorithm

Raheleh Khanduzi, M. Reza Peyghami, H. Reza Maleki

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

On artificial neural networking-based process monitoring under bootstrapping using runs rules schemes

Babar Zaman, Muhammad Riaz, Shabbir Ahmad, Saddam Akber Abbasi

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining

Ibrahem Maher, Ahmed A. D. Sarhan, M. Hamdi

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Using upper bound solution to analyze force parameters of three-roll cross rolling of rings with small hole and deep groove

Lin Hua, Jiadong Deng, Dongsheng Qian, Qi Ma

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Automatic control of WEDM servo for silicon processing using current pulse probability detection

Liu Zhidong, Chen Haoran, Pan Huijun, Qiu Mingbo, Tian Zongjun

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Concurrent fixture design for automated manufacturing process planning

Wentao Fu, Matthew I. Campbell

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

CAD/CAE integration: updating the CAD model after a FEM analysis

Borhen Louhichi, Gad N. Abenhaim, Antoine S. Tahan

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Optimization of thrust, torque, entry, and exist delamination factor during drilling of CFRP composites

Kumar Abhishek, Saurav Datta, Siba Sankar Mahapatra

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Discovering task assignment rules for assembly line balancing via genetic programming

Adil Baykasoğlu, Lale Özbakır

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Welding process of consumable double electrode with a single arc GMAW

H. L. Wei, H. Li, Y. Gao, X. P. Ding, L. J. Yang

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Improving accuracy of curved corners in wire EDM successive cutting

Hamid Abyar Firouzabadi, Jamshid Parvizian, Amir Abdullah

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

A bi-objective imperialist competitive algorithm for no-wait flexible flow lines with sequence dependent setup times

Majid Khalili, Bahman Naderi

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Optimization of operator allocation in a large multi product assembly shop through unique integration of simulation and genetic algorithm

A. Azadeh, S. M. Asadzadeh, S. Tadayoun

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Numerical and experimental studies on grind-hardening cylindrical surface

Liu Songyong, Yang Gang, Zheng Jiaqiang, Liu Xiaohui

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Fabrication of through-hole with biconically shaped cross sections by using electroforming and inert metal mask electrochemical machining

Pingmei Ming, Xiaohui Bao, Qiaoling Hao, Juntao Wang

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Prognosis of the probability of failure in tool condition monitoring application-a time series based approach

Yue Wu, G. S. Hong, W. S. Wong

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

A new process chain for producing bulk metallic glass replication masters with micro- and nano-scale features

Pierre C. Vella, Stefan S. Dimov, Emmanuel Brousseau, Ben R. Whiteside

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Integrated system for analyzing maintenance records in product improvement

Susanne Dienst, Fazel Ansari, Madjid Fathi

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Framework to evaluate manufacturing capability using analytical hierarchy process

R. R. Lekurwale, M. M. Akarte, D. N. Raut

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Springback evaluation in hot v-bending of Ti-6Al-4V alloy sheets

Yingying Zong, Po Liu, Bin Guo, Debin Shan

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Effect of posttreatments on the performance of tungsten carbide (K20) tool while machining (turning) of Inconel 718

D. G. Thakur, B. Ramamoorthy, L. Vijayaraghavan

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Effect of machining-induced residual stress on the distortion of thin-walled parts

Soroush Masoudi, Saeid Amini, Ehsan Saeidi, Hamdollah Eslami-Chalander

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Influence of different cooling methods on drill temperature in drilling GFRP

K. Jessy, S. Satish kumar, D. Dinakaran, V. Seshagiri Rao

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Robust optimization approach for an aggregate production–distribution planning in a three-level supply chain

Amir Hossein Niknamfar, Seyed Taghi Akhavan Niaki, Seyed Hamid Reza Pasandideh

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Thermal optimization of an ultra-precision machine tool by the thermal displacement decomposition and counteraction method

Yingchun Liang, Hao Su, Lihua Lu, Wanqun Chen, Yazhou Sun, Peng Zhang

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Cuckoo optimization algorithm for unit production cost in multi-pass turning operations

Mohamed Arezki Mellal, Edward J. Williams

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Improving the dynamic metal transfer model of gas metal arc welding (GMAW) process

A. R. Doodman Tipi, S. K. Hosseini sani, N. Pariz

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Research on enterprise customization diagnosis for mass customization

Weijin An, Wenming Yang, Wei Guo, Dianhua Zhu

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Simultaneous optimization of WEDM responses using grey relational analysis coupled with genetic algorithm while machining EN 353

A. Varun, Nasina Venkaiah

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Empirical models for cutting forces in finish dry hard turning of hardened tool steel at different hardness levels

Linhu Tang, Zhongwen Cheng, Jianlong Huang, Chengxiu Gao, Wenchun Chang

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

A modeling method for turning parameters coupling based on minimum cutting tool wear

Jing Sheng

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Fabrication of laminated-metal composite tubes by multi-billet rotary swaging technique

Hui-feng Wang, Jing-tao Han, Qing-le Hao

01.01.2015 | ORIGINAL ARTICLE | Ausgabe 1-4/2015

Modulated fiber laser welding of high reflective AZ31

Lin-Jie Zhang, Xing-Jun Zhang, Jie Ning, Jian-Xun Zhang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise