Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 9-10/2021

Ausgabe 9-10/2021

Inhaltsverzeichnis ( 44 Artikel )

17.04.2021 | Critical Review | Ausgabe 9-10/2021

A review of G code, STEP, STEP-NC, and open architecture control technologies based embedded CNC systems

Kamran Latif, Anbia Adam, Yusri Yusof, Aini Zuhra Abdul Kadir

11.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels

Cemal İrfan Çalışkan, Gökhan Özer, Mert Coşkun, Ebubekir Koç

12.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Automatic calibration of work coordinates for robotic wire and arc additive re-manufacturing with a single camera

Qiang Wu, Xunpeng Qin, Yifeng Li, Congming Liang, Zeqi Hu

12.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Artificial neural network for modeling and investigating the effects of forming tool characteristics on the accuracy and formability of thin aluminum alloy blanks when using SPIF

Sherwan Mohammed Najm, Imre Paniti

12.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effect of temperature on the deep drawing forming performance of Ti/Al laminates: experimental investigation and finite element analysis

Hantao Kou, Liang Qin, Ali Abd El-Aty, Yu Liu, Xuwei Zhu, Jie Tao

12.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing

Sergey Borisovich Sidelnikov, Denis Sergeevich Voroshilov, Mikhail Mikhaylovich Motkov, Viktor Nikolaevich Timofeev, Igor Lazarevich Konstantinov, Nikolay Nikolaevich Dovzhenko, Ekaterina Sergeevna Lopatina, Vadim Mikhaylovich Bespalov, Ruslan Evgenyevich Sokolov, Yulbarskhon Nabievich Mansurov, Marina Vladimirovna Voroshilova

12.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Heterogeneous sensors-based feature optimisation and deep learning for tool wear prediction

Xiaoyang Zhang, Sheng Wang, Weidong Li, Xin Lu

12.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Study on surface characteristics in ultrasonic vibration-assisted WEDM-LS based on spatial vibration of electrode wire

Yan Wang, Cheng-Zhen Wu, Hua-Yi Chai, Wei Xiong, Rui Wang, Jie Yang

13.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effects of cooling channel layout on the cooling performance of rapid injection mold

Chil-Chyuan Kuo, Zi-Fan Jiang, Ming-Xue Yang, Bing- Jun You, Wei-Cheng Zhong

13.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Extraction of tool wear indicators in peck-drilling of Inconel 718

Amaia Jiménez, Miguel Arizmendi, José Manuel Sánchez

13.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Simulation analysis of cutting process for Inconel718 nickel-based superalloy

Xueguang Li, Yahui Wang, Ke Guo, Liqin Miao

13.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Effects of threaded pin profile on torque, power, and energy by modeling and experimental analysis

Karen J. Quintana, Jose Luis L. Silveira

14.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Kinematic modeling of surface topography ground by an electroplated diamond wheel

Changsheng Li, Liangchi Zhang, Jianjun Ding, Chuhan Wu, Lin Sun, Qijing Lin, Zhuangde Jiang

15.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Sustainability and tool wear of titanium alloy thread cutting in dry and cryogenic conditions

Anna Zawada-Tomkiewicz, Łukasz Żurawski, Dariusz Tomkiewicz, Filip Szafraniec

15.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Grinding characteristics of CVD diamond grits in single grit grinding of SiC ceramics

Xiaotian Shen, Xin Song, Xinchang Wang, Fanghong Sun

15.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Analytical modeling and experimental study of laser powder-fed additive manufacturing on curved substrates

Lijuan Zhao, Haitao Yue, Chenguang Guo, Qiang Li, Jianzhuo Zhang

15.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method

Mehmet Akif Erden, Nafiz Yaşar, Mehmet Erdi Korkmaz, Burak Ayvacı, K Nimel Sworna Ross, Mozammel Mia

15.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Modelling and analysis of abrasive water jet cutting front profile

Shu Wang, Fengling Yang, Dong Hu, Chuanlin Tang, Peng Lin

15.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Tribological viewpoint of the cutting force in rotary ultrasonic vibration-assisted side milling (RUVSM)

Yi-Jia Sun, Hu Gong, Yi Wang, Hao Ni

17.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Feature extraction of milling chatter based on optimized variational mode decomposition and multi-scale permutation entropy

Xianli Liu, Zhixue Wang, Maoyue Li, Caixu Yue, Steven Y. Liang, Lihui Wang

17.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Investigation of the laser cleaning process for IBS grids in optical coating technology

Alexandr Belosludtsev, Ignas Bitinaitis, Kazimieras Baltrušaitis, Aleksej M. Rodin

18.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Energy-efficient buffer allocation problem in unreliable production lines

Yasmine Alaouchiche, Yassine Ouazene, Farouk Yalaoui

18.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Development and characterization of green automotive brake pads from waste shells of giant African snail (Achatina achatina L.)

Chinwuba Victor Ossia, Akuro Big-Alabo

18.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Precision grinding of cemented carbides based on a multi-layer brazed diamond wheel using an electrolyte containing carbon nanotubes

Qiaoping Wu, Boxin Li, Zhiyong Ouyang, Guoan Mao, Linlin Wan

19.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Cutting edge wear in high-speed stainless steel end milling

Mohammad Malekan, Camilla D. Bloch-Jensen, Maryam Alizadeh Zolbin, Klaus B. Ørskov, Henrik M. Jensen, Ramin Aghababaei

19.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Advanced model-based controller for cyber-physical shot peening process

Van Bo Nguyen, Augustine Teo, Te Ba, Ampara Aramcharoen, Kunal Ahluwalia, Si Bui Quang Tran, Chang Wei Kang

19.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Robotic skeleton arc additive manufacturing of aluminium alloy

Bintao Wu, Zengxi Pan, Yu Ziping, Stephen van Duin, Huijun Li, Edward Pierson

19.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Load prediction on metal forming process (tube sinking) using finite element method

Akinola Ogbeyemi, Ikechukwu Okoh, Orogo Imuero, Osezua Ibhadode, John Akpobi

19.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Surface roughness analysis of medical grade titanium sheets formed by single point incremental forming

Shakir Gatea, Hengan Ou

19.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A rigid-flexible coupling pretravel error model for a touch-trigger probe in an on-machine inspection system

Simi Li, Pingfa Feng, Long Zeng, Shuai Wang, Yamin Li, Shaoqiu Zhang

19.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Classification and variation of fracture modes in laser shock hole-clinching

Chao Zheng, Shushuai Liu, Yunhu Zhu, Yiliang Zhang, Guoqun Zhao, Zhong Ji

20.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Simulated and experimental analysis of laser beam energy profiles to improve efficiency in wire-fed laser deposition

Nicholas Goffin, John R. Tyrer, Lewis C. R. Jones, Rebecca L. Higginson

20.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Theoretical and experimental investigations of mechanical vibrations of hot hammer forging

Saeid Saberi, Jochen Fischer, Martin Stockinger, Ralph Tikal, Reza Afsharnia

20.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Multi-spindle drilling of Al2024 alloy and the effect of TiAlN and TiSiN-coated carbide drills for productivity improvement

Muhammad Aamir, Majid Tolouei-Rad, Khaled Giasin

20.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

The effect of printing parameters on sintered properties of extrusion-based additively manufactured stainless steel 316L parts

Waqar Hassan, Muhammad Asad Farid, Anna Tosi, Kedarnath Rane, Matteo Strano

20.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Geometrical optimization of centerless grinding process by profiled workrest

Marco Leonesio, Jeremi Wojcicki, Giacomo Bianchi

21.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Diagnostic and severity analysis of combined failures composed by imbalance and misalignment in rotating machines

Dionísio Henrique Carvalho de Sá Só Martins, Denys Pestana Viana, Amaro Azevedo de Lima, Milena Faria Pinto, Luís Tarrataca, Fabrício Lopes e Silva, Ricardo Homero Ramírez Gutiérrez, Thiago de Moura Prego, Ulisses Admar Barbosa Vicente Monteiro, Diego Barreto Haddad

21.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Design and experimental study of longitudinal-torsional ultrasonic transducer with helical slots considering the stiffness variation

Hongbo Li, Tao Chen, Han Song, Qihan Wang, Junpeng Ye

21.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

A Motion State-based Printing Time Modeling and Printing Cost Analysis for Laser Direct Deposition Process

Haiying Wei, Keke Deng, Yuan Tan, Wen Liu

21.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Optimization of laser beam welding of steel parts made by additive manufacturing

Fabrizia Caiazzo, Vittorio Alfieri

21.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Numerical modelling and experimental study on pulsed laser surface texturing on cemented carbides

Yu Liu, Xin Liu, Taoyong Li, Yuan Tian

21.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021 Open Access

Improving AR-powered remote assistance: a new approach aimed to foster operator’s autonomy and optimize the use of skilled resources

Davide Calandra, Alberto Cannavò, Fabrizio Lamberti

21.04.2021 | ORIGINAL ARTICLE | Ausgabe 9-10/2021

Geometric influence of the laser-based powder bed fusion process in Ti6AL4V and AlSi10Mg

Zhong Yang Chua, Seung Ki Moon, Lishi Jiao, II Hyuk Ahn

12.04.2021 | Application | Ausgabe 9-10/2021

Predicting magnetic characteristics of additive manufactured soft magnetic composites by machine learning

Tsung-Wei Chang, Kai-Wei Liao, Ching-Chih Lin, Mi-Ching Tsai, Chung-Wei Cheng

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise